• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.124-129
• /
• 2015

An experimental study was performed estimating COP(Coefficient of Performance) of air-conditioning cycle using inverter scroll compressor with and without $Al_2O_3$ nano particle. All experiments were done for various compressor speeds from 1000~4000 rpm and used the inverter controller called CANDY to change the compressor rpm. The air-conditioning cycle components in the apparatus were used as same with components of YF hybrid car. To estimate the COP, this study measured the temperature and pressure at inlets and outlets of compressor, condenser, and evaporator. And also measured the compressor input power using Powermeter. Through the experiments, the maximum error to estimate COP was shown about ${\pm}6.09%$ at 3500rpm. The COP of refrigeration cycle with $Al_2O_3$ nano-particle was similar with that of the base cycle without nano-particle between 1000~3000 rpm of the compressor speed. But, This study showed that the COP of the cycle with $Al_2O_3$ over 3000 rpm of the compressor speed was higher than that of the base cycle due to the higher heat transfer rate increased in the evaporator from the higher oil flow rate inside the cycle as well known. Those results can be used the basic and fundamental data to design the air-conditioning cycle using inverter scroll compressor with $Al_2O_3$ nano particle.

• Food Science and Preservation
• /
• v.24 no.7
• /
• pp.915-922
• /
• 2017

This study aimed in onion production by evaluating cost and labor efficiencies of onion storage methods using either a ton-bag or a wire-steel pallet. New methods using ton-bag and wire-steel pallets were developed and applied to postharvest tasks, such as harvest packaging, transportation, and storage. The storage parameters evaluated for their effect on the logistics of onion production were: working duration, working hours, and cost expenditure. The longitudinal tensile strength of the ton-bag developed in this study was 16% higher than that of the conventional ton-bag. The wire-steel pallet developed in this study had 10% more storage capacity in a low-temperature storage room, and its truck loading capacity was more than doubled compared to that of the conventional steel pallet. There was no difference in the wasting rate during bulk storage between the newly developed wire-steel pallet and the conventional steel pallet, for 500 kg of onions. However, the bulk storage of 1,000 kg of onions using the wire-steel pallet was not found to be suitable, because the wasting rate of onions stored using the wire-pallet was 3.7% higher than that of onions stored using a conventional steel pallet. The time and the total investing costs for the bulk method decreased by 50.1% and 46.1%, respectively, compared to those for conventional harvest. In the bulk storage using the wire-steel pallet, the total storage cost decreased by 28.8%. Thus, it is estimated that we could have saved 18.3 billion won if the wire-steel pallet method about 30% of the total onion production (1,298,749 M/T) in 2016.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.124-135
• /
• 2015

As many countries have been raising awareness of environmental issues, greater efforts for eco-friendly construction have been made in both governmental and private sectors. However, assessment circumstances for building energy performance and green building standard of legislation are still based on two dimension and handwork. This takes time, cost and labor, and makes assessment inaccurate and inefficient. Therefore, this study suggests methods to improve eco-friendly construction permission process and to automatize open BIM-based assessment of Energy Performance Index (EPI) among several eco-friendly construction certification standards. First, it analyzes the relations between assessment criteria and IFC data, and provides solutions to problems and limitations. Second, it applies the solutions to assessment program in order to automatize open BIM-based assessment for EPI. The eco-friendly construction permission process with these solutions applied will reduce time, cost, and labor by simplifying and automatizing the tasks. Also, the simplified process of design revision will improve not only productivity and efficiency but also accuracy and reliability.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.23-28
• /
• 2002

본 연구에서는 간단한 조작을 통하여 작물의 특성에 따라 진동방향을 조절 가능하게 함으로써 물리적 성질이 서로 다른 감자, 고구마, 마늘, 양파, 생강 등 거의 모든 뿌리작물의 수확에 이용할 수 있는 다목적 굴취기를 기구학적으로 설계하고, 뿌리작물 굴취기의 성능에 영향을 미치는 진폭, 진동수, 작업속도를 변화시킬 때 각각의 조합에 있어서 굴취판상의 특정한 점들의 운동궤적을 분석하고 이에 기초하여 굴취기의 설계변수와 작업에서의 설정변수 를 결정하고자 하였으며, 그 결과를 요약하면 다음과 같다. 1) 작업위치에 따라 굴취판 뒷부분(선별부)의 진동방향 조절이 가능하기 때문에 진동방향을 조절하면 물리적 성질이 서로 다른 감자, 고구마 마늘, 양파 등 거의 모든 뿌리작물의 수확에 이용할 수 있을 것으로 사료된다. 2) 굴취판의 궤적분석결과 진폭이 3mm일 때에는 캠 축의 회전속도와 작업속도에 관계없이 굴취작업이 불가능할 것으로 판단되었다. 진폭이 6mm일 때에는 작업속도 1.08km/hr에서 캠 축의 회전속도가 841rpm 이상이면 굴취작업이 가능할 것으로 판단되었고, 작업속도 2.16km/hr이상에는 굴취작업이 불가능할 것으로 판단되었다. 진폭이 9mm일 때에는 작업속도 1.08km/hr에서 작업할 때 사용한 캠축의 회전속도에 관계없이 굴취작업이 모두 잘 이루질 것으로 판단되었고, 작업속도 2.16km/hr에서는 캠축의 회전속도가 995rpm 일 경우에만 굴취작업이 가능할 것으로 판단되었으며, 작업속도 3.24km/hr에서는 작업위치나 캠축의 회전속도에 관계없이 모두 굴취작업이 불가능한 것으로 사료된다. 3) 작업속도를 1.08km/hr 이상으로 하려면 소요동력의 관점에서 볼 때 진폭은 크게하고 진동수는 작게 하는 것이 유리하기 때문에 진폭을 9mm이상 취하는 것이 바람직할 것으로 사료된다.회로 가장 많이 발생하였으며, 다음으로 밀양과 나주지역이 29회, 김제지역이 28회 등으로 많은 발생빈도를 보였다.생시 진화방법의 개발 등에 대한 기본data로서의 역할을 충분히 할 수 있을 것으로 사료된다. 평가되었다.us에 대하여 높은 것으로 나타났다.bangular에서 subrounded에 해당한다. 이러한 현저한 차이를 보이는 이유는 남극적 빙하성 환경 조건과 이 지역의 해양 퇴적학적 특성에 그 원인이 있다고 해석된다.ea. Our ancestors really began to drink teas from the period of Unified Sila on. This country turning to the Koryo dynasty, tea drinking manner began to prevail so much that drinking tea became a ceremony. Daring the Yi dynasty it was much camplicated to make and boil the leaf tea. As a result of the previous fact pure tea came to have disappeared and odorous pharmaceutical became prevailent. 7) For value of exploiting Kungjuk tea (ginger tea seasoned with phyllostachy and addition of honeyl) was the highest among many. The worth of developing all the teas among all the beverages was regarded as that high of 51%, while even the tea regarded as worthless obtai

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.431-431
• /
• 2016

J 호소는 1942년도에 충청남도 아산시 선장면에 설치된 농업용 저수지로서, 현재 COD, TN, TP 모두 등급외의 수질상태를 보이고 있다. J 호소 상류 유역은 축산농가가 다수 위치하고 있으며, 설치된 지 70년이 지난 노후화된 저수지로 고농도의 오염물질 유입뿐만 아니라 호소 바닥의 오염 퇴적물에 의한 내부 부하가 중요한 수질오염원이 되고 있다. 호소의 수질은 현재 COD 10.6~16.5 mg/L, Chl-a $75mg/m^3$ 이상으로 수질오염도가 매우 높으며, 특히 늦봄에서 초가을까지 외기온도 상승 및 저수율 저하와 함께 부영양화 증가, 녹조 대발생 등으로 호 내 물고기 대량 폐사 및 악취발생 등으로 민원이 다수 발생하고 있다. 이러한 현상의 직접적인 원인은 수중의 DO 농도 결핍이며, 따라서 수중의 DO 농도를 일정수준 이상으로 유지시켜 주는 것은 호소 수질관리를 위해 매우 필요하다고 판단된다. 본 연구에서는 공기 중의 산소를 호소 수체에 포기시켜 주는 마이크로버블 발생장치를 J 저수지에 설치하여 수체의 DO 농도 변화 등을 분석하였고, 본 연구결과는 농업용 호소의 수질개선을 위한 기술개발 및 계획수립의 기초자료로 활용하고자 하였다. 마이크로버블 포기장치는 수심이 약 4m 되는 저수지 제방 근처에 100m 간격으로 총 3지점에 설치하였다. 버블 발생기는 기액 2상류 선회형 마이크로 버블 발생장치로 3지점에 각 1set(1set에 3기로 구성)씩 구성하여 저수지 바닥 층에서 상부로 1m 떨어진 지점에 고정식으로 설치하였다. 총 공기흡입량은 380 LPM이며, 사용동력은 12.2kW를 사용하였다. 마이크로 버블 포기장치 설치 후 호 내 DO 농도 변화를 평가하기 위하여 호소 전체에 18개 지점을 선정하여 수심 50cm 간격으로 DO 농도를 측정하였다. 가동 전에는 DO 평균농도가 표층에서는 약 7.7mg/L로 나타났고, 수심에 따라 거의 수직적으로 감소하여 바닥층에서는 약 0.2mg/L로 거의 무산소 상태를 보이고 있었다. 마이크로 버블 가동 2주 후에는 수심 3m까지의 모든 수층에서 DO 농도가 약 6.0mg/L 이상을 보였고, 바닥층에서는 DO 약 3.4mg/의 농도를 나타내었다. 가동 3주 후에도 2주 후와 비슷한 수치를 보이고 있었으나 가동 4주가 지나면서부터는 호소 바닥층(수심 3.5m)에서도 DO 농도가 7.0mg/L 이상의 높은 농도를 유지하는 것으로 조사되었다. 호소 저층에서 호기성 상태의 지속적 유지는 퇴적 오염물질이 수층으로 용출되는 것을 예방할 수 있으므로 마이크로버블을 잘 활용하면 호소의 악취제거 및 수질개선에 많은 도움이 될 것으로 판단된다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.5
• /
• pp.495-501
• /
• 1994

This experiment was carried out to investigate the proper seeding methed for direct seeding culture of rice in puddled soil at ill-drained paddy field. Mangeumbyeo was seeded on May 11 with drill seeder attached to cultivater, dibbling seeder attached to transplanter and power dust blower. And to determine the proper flooding time after seeding, Mangeumbyeo was seeded on May 7 and June 1 with drill seeder. Emergence ratio wasn't significantly different between drill seeder seeding and dibbling seeder seeding but emergence was very low with power dust blower. Working hour for seeding was shortened in the order of power dust blower, drill seeder and dibbling seeder, and these seeding methods saved the working hour remarkably compared with machine transplanting of infant seedling by omitting the procedures of raising seedling and transplanting. Lodging occurred slightly in all seeding methods. However, yield wasn't significantly different between machine transplanting of infant seeding and direct seeding culture in puddled soil except power dust blower. When field was flooded on seeding date, the emergence period was shortened, emergence ratio was increased and weed occurrence was decreased. Yield was highest when flooding was done on seeding date as the number of panicle per m$^2$ and the number of spikelets per m$^2$ were higher than any other flooding time.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.825-834
• /
• 2023

The demands of people who purchase fashion products on Internet shopping are gradually increasing, and attempts are being made to provide user-friendly images with 3D contents and web 3D software instead of pictures and videos of products provided. As a reason for this issue, which has emerged as the most important aspect in the fashion web shopping industry, complaints that the product is different when the product is received and the image at the time of purchase has been heightened. As a way to solve this problem, various image processing technologies have been introduced, but there is a limit to the quality of 2D images. In this study, we proposed an automatic conversion technology that converts 2D images into 3D and grafts them to web 3D technology that allows customers to identify products in various locations and reduces the cost and calculation time required for conversion. We developed a system that shoots a mannequin by placing it on a rotating turntable using only 8 cameras. In order to extract only the clothing part from the image taken by this system, markers are removed using U-net, and an algorithm that extracts only the clothing area by identifying the color feature information of the background area and mannequin area is proposed. Using this algorithm, the time taken to extract only the clothes area after taking an image is 2.25 seconds per image, and it takes a total of 144 seconds (2 minutes and 4 seconds) when taking 64 images of one piece of clothing. It can extract 3D objects with very good performance compared to the system.

• Korean Journal of Organic Agriculture
• /
• v.31 no.4
• /
• pp.413-426
• /
• 2023

These experiments were conducted for 3 years from 2021 to 2023 to develop a method that can be safely used to prevent the leakage of Golden apple snails (Pomacea canaliculata) from eco-friendly rice plantations. In the southern part of Jeollanam-do, after planting rice, the young golden apple snails placed in the rice field become adults around mid-July and begin spawning. These individuals can overwinter in drains that do not dry out, but individuals hatched after mid-July will not mature enough to overwinter. The size of golden apple snails overwintered in the drainage canal was more than 2.5cm in shell height. Installing a net at the inlet could block 95% of the inflow of snails, and 99% of outflow was blocked by installing an improved water trap and net at the drain. During the mid-drying period and pre-harvest drying period, a water path was created with a power paddy pottery machine. 59.5% of snails were attracted to the waterway, and it took 130 minutes to build the waterway and collect the snails. Based on these results, seasonal paddy management tips for the safe use of giant snails in rice fields were suggested.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.76-81
• /
• 2024

Recently, agricultural methods are changing from experience-based agriculture to data-based agriculture. Changes in agricultural production due to the 4th Industrial Revolution are largely occurring in three areas: smart sensing and monitoring, smart analysis and planning, and smart control. In order to realize open-field smart agriculture, information on the physical and chemical properties of soil is essential. Conventional physicochemical measurements are conducted in a laboratory after collecting samples, which consumes a lot of cost, labor, and time, so they are quickly measured in the field. Measurement technology that can do this is urgently needed. In addition, a soil analysis system that can be carried and moved by the measurer and used in Korea's rice fields, fields, and facility houses is needed. To solve this problem, our goal is to develop and commercialize software that can collect soil samples and analyze the information. In this study, basic soil composition measurement was conducted using soil composition measurement sensors consisting of hardness measurement and electrode sensors. Through future research, we plan to develop a system that applies soil sampling using a CCD camera, ultrasonic sensor, and sampler. Therefore, we implemented a sensor and soil analysis UI that can measure and analyze the soil condition in real time, such as hardness measurement display using a load cell and moisture, PH, and EC measurement display using conductivity.

• Korean Journal of Community Nutrition
• /
• v.9 no.2
• /
• pp.191-203
• /
• 2004

This study was performed to compare the foodservice management practices in the employee feeding operations of Jeonnam and Chungchong area. Questionnaires were developed and mailed to 160 dietitians with management in employee foodservice of Jeonnam and Chungchong area. Completed questionnaires were received from 124 dietitians with a response rate of 77.5%. The results of this study can be summarized as follows:. Age, work experience, concurrent position and work time of dietitians were significantly higher in the Chungchong area than those in the Jeonnam area. Times of meals and amount of meals served per day in the Chungchong area were significantly higher than those in the Jeonnam area. The type of menu by foodservice operation was high non-selective menu in both areas, especially non-selective menu was high in self-operated place whereas selective menu was high in contract management. Period of cycle menu was 10-15 days in Jeonnam area, but that was 7 days in Chungchong area and so cycle menu of both areas was significantly different (p ＜ 0.001). Most considerable factor in menu planning was preference in Jeonnam area and was cost in the Chungchong area. Food purchasing method was used mostly by automatic computerized order in the Jeonnam area whereas telephone or mail order was high in the Chungchong area.