• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.1
• /
• pp.96-102
• /
• 1981

Effect of shifting planting-time and different nitrogen on the yield and characteristics of plant growth in safflower, Chrthamus Tinctorius L. This study was carried out to investigate the optimum sowing-date and the ecological variations due to differerent amount of nitrogen for safflower on the Experiment Farm of Sang Ji college from March 17 to may 16, 1980, sowing seeds with an interval of 10 days and the amount of nitrogen were applied in 5 levels (Non, half-standard, standard, one and half-ordinary amount-No and twice amount). The triple super phosphate and pottassium chloride were applied only in standard amount. The results obtained are summarized as follows; 1. As sowing-date was delayed, the germination-ratio decreased, germinating speed increased, and the time required to attain the most vigorous germinating stage and days required for germination shortened. 2. Plant height, number of branch and stem diameter showed a decrease as sowing-date was delayed. And at the same time, plant height and number of branch showed a tendency to increase as amount of nitrogen was increased. 3. As sowing-date was delayed, the number of pods and the weight of 1000-grains were decreased. Moreover, the earlier sowing-date was, the more it increased. And as amount of nitrogen was increased, number of pods and yield also were strikingly increased. 4. The fresh-weight of flower with orange and orange-red colour, as influenced by the different sowing-date, was found out to be largest at the begining of April. But increasing amount of nitrogen did not show influence upon the promotion of flowering. 5. Judging from the results reported above, the optimum sowing-date of safflower seemed to be the begining of April; also the culture of safflower seemed to be the effects of much amount of nitrogen.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6142-6151
• /
• 2015

This study is conducted to develop and optimize fruit spirits by using Schizandra chinensis fruit which are rarely used as spirits in the world. For this purpose, the raw material, main compounds of fermented mash and, quality characteristics of distilled liquor prepared with different distillation methods were analyzed. The studt period lasted six months and the results were follows. Schizandra chinensis was not suitable for alcohol fermentation because the sugar concentration and acidity were low. Therefore, the fermentation condition was appropriate to mix with the weight ratio of fresh Schizandra chinensis fruit, water and sugar as 1:1.5:0.25, and was fermented the mix by adding 0.06 w/w% of $(NH_4)_2HPO_4$ compared to the must total weight. It was also examined to analyze product characteristics of fruit spirits prepared with different methods of distillation(column-pot still, pot still, vacuum still). The result showed that fruit spirits made by vacuum still with fresh Schizandra chinensis fruit indicated the best product quality while the distillation of column-pot still showed the best yield.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.6-6
• /
• 2009

자동차 운반용 선박(PCTC) 건조 시, 자동차를 고정시키기 위해 약 5 만 여개의 Lashing Socket(6,700 Units PCTC 기준)이 소요되는데, 이때 사용되는 Lashing Socket 은 용도 및 형태에 따라 Hole Cup, Flush Cloverleaf Type Pot, Raised Cloverleaf Type Pot, D-Ring, Crinkle Bar 등으로 구분된다. 이와 같이 다양한 종류 중에서 Hole cup 타입이 전체 적용되는 Lashing Socket 의 약 80%에 이른다. 기존에 사용되고 있는 자동용접장치는 Hole Cup 이외에는 적용이 불가능하고, 자석을 이용하여 Hole Cup 의 상부에 위치시키는 방식이었기 때문에 경량화 및 다양한 종류 및 크기의 Lashing Socket 에 적용이 가능한 자동용접장비의 개발이 요구되었다. 본 연구에서는 두께가 다른 $\phi$140 Hole Cup 및 Flush Cloverleaf Type Pot, Raised Cloverleaf Type Pot 에 적용 가능하며, 분리형 용접캐리지와 Centering Template, Magnet Jig 로 구성된 연속 및 단속 용접이 가능한 자동용접장치를 연구 개발하였다. 이를 통해 종래 Hole Cup 전용 자동용접 캐리지의 문제점을 개선하여, 작업자가 Centering Template 과 Magnetic Jig 을 이용하여 캐리지를 Hole Cup 의 중앙에 위치시키기 용이하게 하였다. 이 같은 분리형 장치 구성을 통해 Hole Cup 중앙에 캐리지 고정 작업과 용접 작업을 분리함으로써 자동용접이 진행되는 도중에 여분의 Jig를 이용하여 다른 Hole Cup 에 용접 준비를 하여 연속적인 작업이 가능하도록 하였다. 본 연구는 종래의 Hole Cup 전용 자동용접 캐리지의 문제점을 개선한 분리형 용접 캐리지를 개발함으로써 아래와 같은 결과를 얻었다. 1. 용접 캐리지를 포함하여 각 부분별 분리를 통해 작업자가 1 회 이동 시 필요로 하는 중량을 감소시켜 장비의 이동 및 제어가 쉽다. 2. Magnetic Jig 를 Centering Template 에 결합하고, Template 의 Jig 를 Lashing Socket 에 결합함으로써 손쉽게 Lashing Socket 의 중심부를 찾을 수 있으므로 용접 캐리지의 정확한 센터 고정이 가능하다. 3. 엔코더에 의한 1 회전을 검출함으로써, 작업 종료 후, 어떤 위치에서나 작업 재개가 가능하며 원점 복귀 작업이 불필요하다. 또한 엔코더에 의한 거리 설정으로 용접 속도에 상관없이 동일한 거리만큼 오버랩 용접이 가능하다. 4 디지털 방식으로 용접 조건의 입력이 가능하고, 용접 조건을 D/B 화 함으로써 Control Panel 상에서의 자동 제어가 가능하다. 이를 통해 연속 용접 또는 단속 용접이 가능하므로 다양한 형태의 Lashing Socket 을 자동 용접할 수 있는 효과가 있다. 이상의 결과를 통해 본 장비가 Fig.2 의 3 가지 종류의 Lashing Socket 용접에 효과적인 장비임을 확인할 수 있었다.

• Journal of Aerospace System Engineering
• /
• v.16 no.5
• /
• pp.1-7
• /
• 2022

Recently, satellites equipped with high-performance electronics have required higher power consumption because of the advancement of satellite missions. For this reason, the size of the solar panel is gradually increasing to meet the required power budget. Increasing the size and weight of the solar panel is one of the factors that induce the elastic vibration of the flexible solar panel during the highly agile maneuvering of the satellite or the mode of vibration coupling to the satellite or the mode of vibration coupling to the micro-jitter from the on-board appendages. Previously, an additional damper system was applied to reduce the elastic vibration of the solar panel, but the increase in size and mass of system was inevitable. In this study, to overcome the abovementioned limitations, we proposed a high -damping yoke structure consisting of a superplastic SMA(Shape Memory Alloy) laminating a thin FR4 layer with viscoelastic tape on both sides. Therefore, this advantage contributes to system simplicity by reducing vibrations with small volume and mass without additional system. The effectiveness of the proposed superelastic SMA multilayer solar panel yoke was validated through free vibration testing and temperature testing using a solar panel dummy.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4D
• /
• pp.671-678
• /
• 2006

In this study, to describe vehicle-structure dynamic interaction phenomena with 1/4 vehicle model, nonlinear Hertzian contact spring and nonlinear contact damper are adopted. The external loads acting on 1/4 vehicle model are selfweight of vehicle and geometry information of running surface. The constraint equation on contact surface is implemented by the Penalty method with stabilization and the reaction from constraint violation. To describe pitching motion of various vehicles two types of the displacement constraint equations are exerted to connect between car bodies and between bogie frames, i.e., the rigid body connection and the rigid body connection with pin, respectively. For the time integration of dynamic equations of vehicles and structure Newmark time integration scheme is adopted. To reduce the error caused by inadequate time step size, adaptive time-stepping technique is also adopted. Thus, it is expected that more versatile dynamic interaction phenomena can be described by this approach and it can be applied to various railway dynamic problems with low computational cost.

• Current Research on Agriculture and Life Sciences
• /
• v.11
• /
• pp.61-70
• /
• 1993

We investigated the effects of shading on the plant growth, flowering and the bulbil formation of Lilium species. As the shading treatment, we used full sunlight and various light intensity, 30%, 50%, 75%, 90% compared to full sunlight with shading net. The results obtained were as follows. The flowering rate and flower number of 'Roma' and 'Georgia' were not effected by various shading treatment. Days to flower in 'Roma' and Tiger lily showed similiar tendency like this. One of the shading effect was stem elongation of 'Connecticut king' markedly reduced compared with other cultivars in flowering rate and flower number. Leaf number of all cultivars was not consistent in tendency. But leaf number of Tiger lily and 'Connecticut king' reduced. The tendency of other experimented Lilium species weren't consistent. Bract leaf number reduced gradually as shading rate increased, plant height and internode length increased. Especially the height of 'Georgia' showed eminant increase compared with others. Total number and weight of bulbil of 'Enchantment' and Tiger lily reduced as shading rate increased.. But bulbil weight from bract part of 'Enchantment' in creased. The bulbils of 'Connecticut King' and 'Roma' appeared only on upper stem parts when treated serious shaded conditions, 75% and 90%. Only 'Connecticut King' and 'Enchantment' showed leaf emergence from bulbil among the L. elegans species.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.2
• /
• pp.230-238
• /
• 2016

This study examined the effects of freezing and thawing conditions on quality of Hanwoo bottom round. The beef samples were frozen by air blast freezing at $-20^{\circ}C$ or ethanol immersion freezing at $-70^{\circ}C$ and then stored at $-20^{\circ}C$ for 10 days. After 10 days of storage, the frozen samples were thawed with air blast thawing at $4^{\circ}C$ or water immersion thawing at $4^{\circ}C$ and subjected to subsequent analyses of drip loss, water holding capacity, thiobarbituric acid reactive substance (TBARS), volatile basic nitrogen (VBN), total aerobic bacteria, and microstructure. Drip loss significantly increased in samples treated with air blast freezing compared to ethanol immersion freezing, whereas freezing and thawing processes had no significant impact on water holding capacity of the samples. Thawing conditions had a much stronger influence on the TBARS and VBN of the samples than freezing conditions. There was no significant difference in the population of total aerobic bacteria among the four samples subjected to one freeze-thaw cycle. In addition, to analyze the effects of freeze-thaw cycle on the quality of beef, three freeze-thaw cycles were performed during storage. Multiple freeze-thaw cycles increased drip loss, TBARS, and VBN and decreased water holding capacity, accelerating microstructural damage. These data indicate that Hanwoo bottom round can be rapidly frozen and thawed by using ethanol immersion freezing and water immersion thawing methods with minimal impact on meat quality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.3
• /
• pp.219-225
• /
• 2012

Seed size has been considered as an effective criteria for selection of the most vigorous seeds in sorghum [(Sorghum bicolor (L) Moench]. The smaller seeds were inferior to the larger sizes in emergence and grain yield. This study was conducted to determine germination rate, field emergence and vigor of sorghum for selection of high quality seed by different seed size. Sorghum cultivar of two (Hwanggeumchal and Tojong) were separated into five seed size proportion (<2.36, 2.80, 3.15, 3.35 and >3.55 mm diam.) according to seed size. The larger seed was more higher 1,000 seeds weight, seed density, carbohydrates and protein content. Total seed germination performing varied 92% at the largest size (>3.55 mm diam.) frequently inferior to slightly 67% at smaller seed (2.36 to 2.80 mm diam.) in the standard germination test. Seed size did have a significant effect on mean emergence time (MET) and maximum emergence rate index (ERI) and percentage of emergence. It should be noted that the results refer to MET of sorghum seeds ranging from 4.26 to 4.74 days. The relationship of seed size was not only to stand establishment but to grain yield. Yield was most affected by seed size and large seeds were superior to the smaller seed in 25~37% of the cases. Especially, yield was significant under 3.15 mm the beginning.

• Horticultural Science & Technology
• /
• v.32 no.2
• /
• pp.202-209
• /
• 2014

This study was conducted to investigate the effects of low temperature shipping condition and precooling treatments (forced air and room cooling) on everbearing strawberry through export simulation of 'Goha' and 'Flamenco' cultivars. After harvest, it took two days to prepare export procedure such as precooling, sorting, storage, transportation, quarantine and handling, and then everbearing strawberry was carried out shipping at room ($20-25^{\circ}C$) or low ($8^{\circ}C$) temperature conditions. In the case of shipping at room temperature, weight losses of both cultivars were increased up to 10% after 2 days where 'Goha' being 2% higher than that of ' Flamenco'. In 'Flamenco' cultivar, shipping temperature and precooling treatment were not effective in firmness and soluble solids contents during transporting periods. However, in 'Goha' cultivar, room cooling treatment and low shipping temperature were effective in maintaining firmness until 4 days after shipping. Especially titratable acidity was affected by shipping temperature ($P{\leq}0.001$) and precooling treatments ($P{\leq}0.05$) in 'Goha' cultivar. Also shipping temperature under $8^{\circ}C$ delayed coloring and decay incidence of both strawberry cultivars, and precooling treatments of both forced air and room cooling reduced frequency of decay. The shelf life of everbearing strawberry at low shipping temperature was extended more than 4 days compared with shipping at room temperature. Precooling treatment including forced air or room cooling will be useful for the two cultivars when they are transported at low temperature. In 'Flamenco' cultivar, the effect of forced air and room cooling was similar, whereas in 'Goha' room cooling was more effective.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.5
• /
• pp.341-358
• /
• 1992

In order to estimate energy budgets of Palaemon macrodactylus, larvae of the shrimp were reared in the laboratory at constant conditions $(25^{\circ}C: 31-32\%o),$ and then juvenile to adult of the shrimp were reared at $15^{\circ}C\;and\;25^{\circ}C$ in the laboratory. Energy used by the reared shrimps were calculated from estimates of data on feeding, growth, molting, metabolism, nitrogen excretion, and energy content. Juveniles and adults reared in the laboratory, which fed on Artemia nauplii, had an average daily growth rates of 0.079 mm/day at $15^{\circ}C\;and\;of\;0.122mm/day\;at\;25^{\circ}C$. The average growth factor* of P. macrodactylus males and females ranged from $3.2\%$ for adult to $13.2\%$ for juveniles individuals, respectively. Intermolt periods were related to body size of the shrimp and to temperature. Average laboratory growth curves were calculated from data on growth factors and intermolt periods to body size of the shrimp at $15^{\circ}C\;and\;25^{\circ}C$. The calorie contents of the shrimp, their molts, eggs and larvae were determined by biochemical composition and oxygen bomb calorimetry. The average amount of energy used in growth for larvae and juvenile to adult were 4.94 cal and 4.55 cal per dry weight in milligram, respectively. The ammount of oxygen used in metabolism was calculated from size, temperature-specific respiration rate. To convert the ammount of oxygen used in respiration into the equivalent energy lost heat was estimated from the data on chemical composition for the larvae and adult, the values was 4.58 cal/ml $O_2$. The energy content per egg was 0.078 cal. The assimilation efficiency estimated by nitrogen content of food and egested faeces gave $61.5\%$ for the larvae. The efficiencies for juvenile to adult ranged between $79.4\%$ and $90.1\%$ The gross growth efficiencies $(K_1)$ and net growth efficiencies $(K_2)$ of P macrodactylus showed $18.33\%\;and 32.63\%$ for total larval stages, ranged from $21.30\%\;to\;31.04\%\;and\;from\;30.03\%\;to\;39.34\%$ for juvenile to adult, respectively.