• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.17-28
• /
• 1999

In order to analyze effects of strain rate on consolidation of natural clay, this paper presents a nonlinear elasto viscoplastic model in which viscoplastic behavior is modeled by a unique effective stress-strain-strain rate relationship (equation omitted). The predicted values using numerical analysis are compared with measured ones in several laboratory tests such as creep test, multistage load test, and relaxation test for Berthierville clay. It is possible to estimate consolidation behavior of natural clay with reasonable accuracy using the proposed nonlinear viscoplastic model.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1992.03a
• /
• pp.103-114
• /
• 1992

Cogging is generally the initial and primary step in the manufacture of practically all large open-die forgings, and consists of forging and ingot by reducing the cross-section and simultaneously enlarging the body. A three-dimensional thermo-viscoplastic finite element model is used to study the distribution of internal stresses and strains of workpiece and temperature of workpiece and die during cogging process. Simulations are carried out on an circular ingot, using v-die and flat die, to study the effects of die configuration, die width, penetration depth, temperature gradient, die overlapping and pass design.

• Transactions of Materials Processing
• /
• v.16 no.2 s.92
• /
• pp.101-106
• /
• 2007

Uniaxial displacement controlled tests were performed on annealed Type 304 stainless steel at room temperature. A servo-controlled testing machine and strain measurement on the gage length were employed to measure the response to a given input. The test results exhibit that the flow stress increases nonlinearly with the strain rate and the relaxed stress at the end of the relaxation periods depends strongly on the strain rate preceding the relaxation test. The rate-dependent inelastic deformation behavior is simulated using a new unified viscoplasticity model that has the rate-dependent format of nonlinear kinematic hardening rule, which plays a key role in modeling the rate dependence of relaxation behavior. The model does not employ yield or loading/unloading criteria and consists of a flow law and the evolution laws of two tensor and one scalar-valued state variables.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.03a
• /
• pp.71-79
• /
• 1994

Strip drawing of strain-hardening, viscoplastic materials with damage is analyzed by a rigid plastic finite element method. A process model is formulated using two state variables, one for strain hardening from slip dominated plastic distortion and the other for damage from growth of microvoids. Application of the model to steady state drawing is given via implementation in a consistent penalty finite element formulation. The predicted density changes as a result of void growth are compared to those from experiments reported in the literature. The effects of drawing conditions such as drawing speed and die angle on the mechanical property changes are studied.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.393-394
• /
• 2010

This paper was examined the plastic viscosity and yield stress of paste and mortar on the part of the research to develop low viscosity and high fluidity concrete for high pumpability. Through this study, we examined the suitable material properties of paste and mortar to low viscosity and high fluidity concrete for high pumpability.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.88-97
• /
• 1999

In this study, a systematic approach for roll pass design in bar rolling was studied. To minimize the trial and errors in the process design, a roll CAD system and a FE analysis system were combined. Based on the system, a methodology for roll pass design by FEM was studied. At first, designed process was compared with the FE analysis results and process redesign based on the FEM results was performed to obtain the specified final geometry. Then, empirical formula for roll speed set-up was compared with the FE analysis results. Further study on various simulations for bar rolling will help in making up for the inaccuracy in the currently used empirical roll speed rules. In addition, verification of the accuracy of the FE analysis system must be performed using experimental data in the industry.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.10a
• /
• pp.150-156
• /
• 1995

In the finite element analysis of metal forming processes, the updated Lagrangian approach has been widely and effectively used to simulate the non-steady state problems. However some difficulties have arisen from abrupt flow change as in extrusion through square dies. In the present work, a ALE(arbitrary Lagrangian-Eulerian) finite element formulation for deformation analysis are presented for rigid viscoplastic materials. The developed finite element program is applied to the analysis of square die extrusion of a square section. The computational results are compared with those from the updated Lagrangian finite element analysis.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1996.03b
• /
• pp.138-144
• /
• 1996

In square die extrusion, flow guide and ide land play important roles for controlling the metal flow in die design. In the present work, the flow guide and the die land are considered for the die construction. Based on ALE description , rigid-viscoplastic finite element analysid is carried out to assess the effects of process and die design parameters. The thermal state affects greatly the product quality in hot extrusion. in the present work, the temperature distribution is also analyzed in theframwork of rigid-viscoplastic finite element computation. As a computational example, hot square die extrusion with flow guide and die land has been analyzed for the profile of a H section.

• Transactions of Materials Processing
• /
• v.1 no.2
• /
• pp.32-39
• /
• 1992

대형 강괴의 자유단조 공정 중에서 코깅(cogging)작업은 강괴 단조의 초기에 단면을 줄이면서 길이 방향으로 늘리는 작업이다. 코깅 작업의 역활은 주조시 발생하는 강괴 내부의 기공을 압착시켜 제거하며 주조 조직을 파괴하여 물성치를 균질화하고 향상시키는 것이다. 그러나 대형강괴의 작업에는 제약조건이 많이 있고 작업공정에서 공정변수도 여러가지 이다. 따라서 본 논문에서는 변형해석과 온도해석을 할 수 있는 3차원 열-점소성 유한요소해석 프로그램을 개발하고, 코깅공정에서 다이의 형상과 다이폭, 다이 겹침과 엇갈리기, 강괴의 온도 구배, 압하 깊이와 패스 설계등의 여러 공정 변수의 영향을 해석하여, 단조 효과를 최대화하는 최적의 단조 공정을 예측하여 공정개선에 적용하는 것이 목적이다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.10a
• /
• pp.17-23
• /
• 1997

In the two-dimensional Finite Element Method for forming simulation, mesh generation and remeshing process are very significant. In this paper, using the modified splitting mesh generation algorithm, we can overcome the limitation of existing techniques and acquire mesh, which has optimal mesh density. A modified splitting algorithm for automatically generating quadrilateral mesh within a complex domain is described. Unnecessary meshing process for density representation is removed. Especially, during the mesh generation with high gradient density like as shear band representation, the modified mesh density scheme, which will generate quadrilateral mesh with the minimized error, which takes effect on FEM solver, is introduced.