• Journal of the KSME
• /
• v.28 no.4
• /
• pp.328-336
• /
• 1988

파괴인성은 내적 및 외적요인 등에 의해 변할 뿐만 아니라 조직의 불균질성 때문에 소성둔화 및 파괴가 균일하게 일어나지 않으므로 이에 대응한 파괴인성을 선택하여 평가함이 가장 중요하다. 또한 기계의 고속화에 따라 충격적인 하중에 의한 동적파괴의 문제가 중요하게 되고 이에 따라 동적파괴인성 평가법의 확립에도 많은 연구가 필요하다. 한편 피로균열진전거동의 실험에는 많은 시간과 인적 노력이 필요로 하며 이러한 문제점을 해결하여 균열진전 측정의 정밀화 및 효율성을 높이기 위해서는 컴퓨터의 이점을 적극적으로 응용할 필요가 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.5
• /
• pp.564-571
• /
• 1985

The estimation of fracture toughness in inhomogeneous material is still insufficient because it is difficult to get information of fracture initiation at the crack tip. Therefore, martensite-ferrite dual phase steel was prepared for a model material and micro-fracture behavior was investigated in the region of pre-fatigue crack in order to understand the characteristic of fracture resistance in inhomogeneous materials. In the case of severely inhomogeneous state, micro-fracture appearance is not distributed homogenously so that the estimation of fracture toughness is hardly possible. On the other hand when the grain size is refined or the strength of martensite is lowered, micro-fracture appearance is distributed homogenously and fracture toughness remarkably increases.

• Journal of Welding and Joining
• /
• v.7 no.1
• /
• pp.42-50
• /
• 1989

The application of fracture mechanics is being increased gradually to assess the safety of welded structures containing crack. Fatigue crack propagation behavior and elastic-plastic fracture toughness J$_{IC}$ of home made flux cored wire(1.22mm) CO$_{2}$ weldments was discussed. Especially fatigue crack propagation test was carried out by .DELTA.K control instead of load control and elastic-plastic fracture toughness J$_{IC}$ was obtained by ASTM-R curve method on C.T.specimen in transverse direction of weldments. The results obtained are as follows; (1) Weld metal presented an almost complete similarity to base metal on fatigue crack propagation rate in transverse direction. (2) Weld metal was more than base metal on J$_{IC}$ value in transverse direction. (3) F.C.W. CO$_{2}$ weldments had an excellent characteristic of fatigue crack propagation rate and J$_{IC}$ in less than 50kg/mm$^{2}$ steel grade, this would result from that weld metal had good static strength.trength.