• Journal of Korean Society of Forest Science
• /
• v.83 no.3
• /
• pp.280-285
• /
• 1994

This study was conducted to investigate the effects of acid deposition on forest soil, major five Korean forest soils(Brown, Dark red, Gray brown, Red and Yellow, and Volcanic ash forest soils) The samples were subjected to receive 1200mm($100mm{\times}12$ times) of artificial acid rain adjusted to pH5.6, 4.0, 3.0 and 2.0. The results obtained of major importance are summarized as follow ; 1. Ca appeared mostly affected at pH treatment of 2.0, while less affected by other pH treatments. Leaching of Ca rapidly increased with increasing of artificial acid rain acidity and application times in Dark red forest soil. 2. In the cases of Mg, K and Na, they showed gradual increase with the addition of artificial acid rain. Mg and Na losses showed similar leaching patterns, but they didn't show difference among the five forest soils. 3. Exchangeable canon concentrations in the soil leachates, which looked slightly different among the five forest soils, were the highest in pH2.0 treatment. Hydrogen ion comsumption capability by exchangeable canon was the highest in Dark red forest soil followed by Volcanic ash, Red and Yellow, Gray brown and Brown forest soils when artificial acid rain were treated.

• Journal of Broadcast Engineering
• /
• v.15 no.4
• /
• pp.563-581
• /
• 2010

In this paper, we perform subjective visual quality assessments on UHD video for UHD TV services and analyze the assessment results. Demands for video services have been increased with availabilities of DTV, Internet and personal media equipments. With this trend, the demands for high definition video have also been increasing. Currently, 2K-HD ($1920{\times}1080$) video have been widely consumed over DTV, DVD, digital camcoders, security cameras and other multimedia terminals in various types, and recently digital cinema contents of 4K-UHD($3840{\times}2160$) have been popularly produced and the cameras, beam projects, display panels that support for 4K-UHD video start to come out into multimedia markets. Also it is expected that 4K-UHD service will appear soon in broadcasting and telecommunications environments. Therefore, in this paper, subjective assessments of visual quality on resolutions, color formats, frame rates and compression rates have been carried to provide basis information for standardization of signal specification of UHD video and viewing environments for future UHDTV. As the analysis on the assessments, UHD video exhibits better subjective visual quality than HD by the evaluators. Also, the 4K-UHD test sequences in YUV444 shows better subjective visual quality than the 4K-UHD test sequences in YUV422 and YUV420, but there is little perceptual difference on 4K-UHD test sequences between YUV422 and YUV420 formats. For the comparison between different frame rates, 4K-UHD test sequences of 60fps gives better subjective visual quality than those of 30fps. For bit-depth comparison, HD test sequences in 10-bit depth were little differentiated from those in 8-bit depth in subject visual quality assessment. Lastly, the larger the PSNR values of the reconstructed 4K-UHD test sequences are, the higher the subjective visual quality is. Against the viewing distances, the differences among encoded 4K-UHD test sequences were less distinguished in longer distances from the display.

• Cartoon and Animation Studies
• /
• s.39
• /
• pp.1-25
• /
• 2015

"Magical girl" is one of many popular genres that are watched in Japanese animation. The characteristics of "Magical girl" genre shows that most main heroine as the girl in young age, and this young girl play her role as a character with supernatural power. The majority in population of Japanese animation consumers were men. However, women began to become this population of Japanese animation consumers with the beginning of "Magical girl" genre, which also became a cause for the birth of "Shojo anime". The first "Shojo anime", as well as the first animation of "Magical girl" genre in Japan was , and this piece made a great hit when it was broadcasted. Since the great hit of , new pieces of animation in "Magical girl" genre has broadcasted through television continually, making other great hits also with in 1982 and< Sailor Moon> in 1992. Discussing of which, made not only a great hit in Japan, but worldwide as well, that its new season of TV series, , is broadcasted in 2014. "Magical girl" genre was loved by viewers of Japanese animation for a long time, and it is still broadcasted regularly today. In observation of pieces in "Magical girl" genre, magical girls who appear as a main character either fight for the world they live in, or take on an adventure, or take an action according to their idealistic purpose. However, the magical girls who appear in take an action not for the peace of their world, but rather for their own benefits and purposes. In , magical girls fight against the witches and their familiar spirits, which end up in a horrible conclusion. The witches who magical girls fought against were not already the witches in the beginning, but in fact were the other magical girls who took their action in the past. It Magical girls in present time were having witch hunt against the witches, who were once another magical girls in the past. Unlike traditional "Magical girl" genre, where witches and magical girls were used to be an that magical girls end up turning into witches. Witches did not exist in the beginning, but rather someone had to be one, to be hunted down in witch hunt. The cause of witch hunt did not exist in the beginning, but rather the ones had to be tagged as witches to be hunted down. Therefore, this paper is written to discuss an existence of witch in research of its historic origin of witch hunt, and on the witches appear in .

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.976-982
• /
• 1998

The effects of the glycoprotein (PAG) isolated from Pteridium aquilinum on the immune function was examined in mice. PAG was intraperitoneally administered into BALB/C mice for 14 days and the antibody forming ability to hen egg lysozyme (HEL) and the blastogenic responses of splenocytes were measured. PAG treatment significantly increased antibody formation to HEL in a dose-dependent manner. Blatogenesis of splenocytes in response to lipopolysaccharide (LPS, B-cell specific mitogen) or phytohemagglutinin (PHA, T-cell specific mitogen) was also increased after treatment with PAG, indicating that the PAG increases both humoral and cellular immunities. To examine whether the immune function of PAG was via a direct effect on the lymphocytes, splenocytes were isolated from BALB/C mice, exposed to various concentrations of PAG in vitro and the blastogenic responses were measured. In vitro exposure to PAG significantly increased blastogenesis of splenocytes to LPS up to $500{\;}{\mu}g/kg$, whereas the blastogenic response to PHA was not altered by PAG treatment. To identify the fraction responsible for the increase in the immune function, the effect of periodate digest, pronase digest or purified polysaccharide on the antibody production to HEL was examined. Crude protein fraction of PAG significantly increased the antibody formation to HEL. On the other hand, both crude and purified polysaccharide fractions did not have any effects on the antibody production ability. These data indicated that 1) PAG increased both humoral and cellular immune functions, 2) the increase in humoral immunity was probably via a direct action of PAG on lymphocytes and 3) the protein portion of PAG was responsible for the increase in humoral immunity.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.174-182
• /
• 2020

The permissible limit of ammonia concentration in drinking water recommended by the World Health Organization (WHO) is 1.5 mg/L. However, in the case of groundwater in Kathmandu, Nepal, the concentration of ammonia fluctuates dramatically from 0 to 120 mg/L at different locations and groundwater depths (Chapagain et al., 2010). Such a high concentration of ammonia causes aesthetic problems in drinking water, such as bad taste and odor; hence, prior treatment is required. In Kathmandu, half of the population utilizes groundwater, which is also employed for drinking water, but owing to a lack of knowledge of household water filters, residents of Kathmandu tend to depend greatly on commercially available jar water than on the installation of a proper household filtration method. Thus, in our study, we employed adsorption and reverse osmosis (RO) as two of the most viable decentralized/household treatment options to address the issue of high contamination of ammonia in drinking water. We evaluated their performances from technical and the economic perspectives using synthetically prepared groundwater at varying ammonia concentrations (50 mg/L and 15 mg/L). Consequently, it was found that adsorption via ion exchange (IE) resin was a comparatively better ammonia removal technology than RO, with 100% ammonia removal even after regeneration; the removal by RO was limited to up to 90%. Furthermore, our study suggests that IE is the most suitable ammonia removal technology for places with lower water consumption (< 50 L/day), whereas RO seemed to be a cost-effective technology for places with higher water consumption, where the daily water demand exceeds 50 L/day. Lastly, these assessments suggest that installing a suitable household treatment system would be more efficient and sustainable from both technical and economic points of view than purchasing commercially bottled water.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.7
• /
• pp.454-461
• /
• 2007

Portable embedded systems have recently become smaller in size and offer a variety of junctions for users. These systems require high performance processors to handle the many functions and also a small battery to fit inside the system. However, due to its size, the battery life has become a major issue. It is important to have both efficient power design and management for each function, while optimizing processor voltage and clock frequency in order to extend the battery life of the system. In this paper, we calculated the efficiency of power in optimizing power rail. This system has two microprocessors. One is used to play music and movie files while the other is for DMB. In order to reduce power consumption, the DMB microprocessor is turned of while music or videos are played. Lastly, DVFS is applied to the processor in the system to reduce power consumption. Experimental results of the implemented system have resulted in reduced power consumption.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.205-212
• /
• 2013

The objective of this study was to investigate the feasibility of replacing a conventional plate fin-tube evaporator with a spiral fin-tube evaporator by comparing the performance of domestic refrigerator-freezers adopting either the plate fin-tube evaporator or spiral fin-tube evaporator. Experiments were conducted for the domestic refrigerator-freezers using either a 2-column and 15-row plate fin-tube evaporator or three spiral fin-tube evaporators with 11, 13, and 15 tube rows (N). The optimum refrigerant charge decreased with a decrease in the number of tube rows. The power consumptions of the domestic refrigerator-freezers using the spiral fin-tube evaporators with N = 11 and 13 were 2.8% and 1.5% lower than those using the plate fin-tube evaporator, respectively. In addition, the cooling capacity of the spiral fin-tube evaporator with N = 13 was 3%-7% higher than that of the plate fin-tube evaporator under the frosting condition. In a cooling speed test, all of the evaporators showed similar performances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.618-624
• /
• 2020

A portable power supply system for soldiers must be able to supply electric energy corresponding to the power consumption of combat support troops, and have a carrying load in a range that does not impair the combatant's ability to execute operations. In particular, as the total required power of combat equipment increases with the advances in the future soldier system, a portable, lightweight power supply system with high efficiency is essential. A fuel cell has a high energy-to-weight density compared to lithium batteries, which are used mainly as a military power source system. Therefore, it is capable of miniaturization and lightweight, making active R&D to a portable power supply system. In this paper, the characteristics of the fuel cell applied as a portable power supply system, and the R&D trends of domestic and foreign military portable fuel cell systems were investigated. The current status of domestic technology compared to the level of foreign development was analyzed. In addition, future technology development plans are presented based on the consideration factors when developing a portable fuel cell (power supply stability, portability, and cost reduction) so that it can be used when establishing a plan on the development of a portable fuel cell system for the future soldier system.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.127-127
• /
• 2017

우리나라 음식물 폐기물은 수분함량 및 유기물 함량이 높기 때문에 부패와 악취, 침출수의 원인이 된다. 하지만 이를 혐기 소화 처리한다면 구성성분에 따라 60-80%가 생분해되어(한국유기성폐자원학회, 2001) 친환경적으로 처리가능하고, 혐기소화 결과물로 발생한 메탄가스를 대체에너지로 사용할 수 있어 유기물을 효과적으로 처리할 수 있다. 그러나 유기성 폐기물은 계절 및 지역에 따라 구성성분의 비가 다르며, 성분 중 지방 함량이 많을 때 바이오가스 생산이 지연되어 생산효율 감소의 주된 원인이 된다(Kafle and Kim, 2013). 전국음식물 폐기물 중 지방함량이 높은 어육류의 발생량은 3차 조사(환경부, 2008)에 비해 2배 이상 증가하였고, 향후 음식 섭취의 서구화로 인한 육류 소비가 증가할 것으로 예상된다(환경부, 2013). 따라서 본 연구는 지방함량이 높은 유기물의 효율적 처리를 위해 지방산 종류에 따라 포화 불포화 지방산을 포함하는 부산물의 혐기소화 능력 및 바이오가스 생산 성능을 구명하는데 목적이 있다. 본 연구 결과, 불포화 지방산 함량이 높은 수준인 부산물의 바이오가스는 629.96-749.14 mL/g VS 이며, 포화 지방산 함량이 높은 수준의 부산물은 560.18-715.43 mL/g VS 였다. 불포화 지방산 함량이 25.31%-46.26%로 많아질수록 초기 순응기간은 13일에서 25일로 증가하였고, 총 바이오가스 생산량의 90%가 생산되는 기간인 T90은 57일에서 72일로 증가하여 바이오가스 생산 속도가 감소한 것으로 판단된다. 포화 지방산은 함량이 24.10-48.74%로 증가할수록 초기 순응기간의 변화는 없었고, T90은 69일에서 62일로 감소하였다. 또한 불포화 지방산이 많은 유기물은 모두 바이오가스 생산 과정에서 2단계의 지연현상을 보였지만, 포화지방산은 함량이 증가하여도 1단계의 지연현상을 보였다. 이러한 차이는 두 지방산에 관여하는 미생물의 차이(Diana, 2007)와 불포화 지방산의 굴곡된 형태가 지방산과 미생물이 상호 작용 방식에 악영향 미치기 때문으로 판단된다(Diana, 2013). 결론적으로, 두 지방산의 소화 방식은 차이가 있으며, 불포화 지방산 함량이 많은 유기물은 탄수화물 함량이 많은 유기물을 10% 이상 혼합하여 지연상을 감소시킬수 있다(Kim, 2017). 포화 지방산 함량이 많은 유기물은 초기 지연 현상 해결을 위한 연구가 추가적으로 요구된다.

• Archives of design research
• /
• v.19 no.1 s.63
• /
• pp.141-150
• /
• 2006

The animation should be produced to attract the audience's interests. Its characters will have the intended personalities through the interactions with the audiences, discarding the attributes of the nature. These personalities form the brand identity when they are exposed visually and will be powerful brand assets which lead the animation industry to the high-value added products. The brand identity of the character, the brand assets, can be used for various products in form of licensing and is noted to make an affirmative leverage effect. In this regard, the author has conducted an empirical research on the animation characters from the viewpoint of the brand, adopting, in particular, the Brand Personality Scale (BPS), which is the output of J. Aaker's (1997) study on brand personality defined as the human properties in relation with the brand. In addition, this study determines the correlation among the animation, brand and consumers based on the Sirgy's study (1982) resulting in that the better the brand and the consumer's personality are matched, the more the brand attitude is improved. In consequence, it is found that the animation characters have three personality levels such as refinement/ability, integrity and interests. The consumer's personality is divided into the 'practical ego-image' and the 'ideal ego-image' in the survey, and the survey result shows that the brand personality of the animation character exists between them.