• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.1
• /
• pp.21-26
• /
• 2012

Microstructural and mechanical property were evaluated at the medium-sized HT9 (12Cr-1MoWV) forged steel which was considered as primary candidate for the fuel cladding in sodium-cooled fast reactor (SFR). Material was forged at $1170^{\circ}C$ after the induction melting to make round bar as 160mm diameter, 7000mm length then the radial distribution of microstructure as well as microhardness was evaluated. The results showed that overall microstructure exhibited as ferrite-martensite structure, where small amount (2~3%) of delta ferrite was formed throughout the specimen and maximum 15% of transformed ferrite was formed at the center, where it gradually decreased toward the radial direction. Sensitivity analysis of the cooling curve and Time-Temperature-Transformation (TTT) diagram revealed that formation of transformed ferrite could be avoided when the diameter was decreased down to 120mm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.3
• /
• pp.233-239
• /
• 2017

The CA (Control Assembly) of an SFR has a CRA(Control Rod Assembly) with an inner duct and control rod. During an emergency situation, the CRA falls into the duct of the CA for a rapid shut-down. The drop time and impact velocity of the CRA are important parameters with respect to the reactivity insertion time and the structural integrity of the CRA. The objective of this study was to investigate the dynamic behavior and integrity of the CRA owing to a drop impact. The impact analysis of the CRA under normal/abnormal drop conditions was carried out using the commercial FEM code LS-DYNA. Results of the drop impact analysis demonstrated that the CRA maintained structural integrity, and could be safely inserted into the flow hole of the damper under abnormal conditions.

• Nuclear industry
• /
• v.36 no.11
• /
• pp.29-44
• /
• 2016

1980~1990년대 OPR1000 기술 자립을 추진할 때도 그랬지만 한국은 원자력 기술 자립에 대한 도전이 선진국에 비해 늦었지만 과학기술자의 열정과 정부의 적극적인 지원으로 오늘날 원자력 선진국이 될 수 있었고, 원자력산업을 해외 수출 산업으로서 다양한 노력을 시도하고 있다. 특히 국내 가동 중인 원전은 외국과 차별되게 1기당 고장 정지율이 0.1건으로 외국 평균의 5.5건과 크게 대별된다. 또한 운전 신뢰성을 나타내는 발전소 가동률도 10% 이상 차로 월등히 높다. 한마디로 한국은 가장 원전의 기술 개발과 운영을 잘하고 있는 원전 선진국임을 자타가 인정하고 있다. 그러나 현재의 기술 수준에 머물면 미래 원전 기술에서는 다른 선진국 내지 중국, 인도 등 신흥국에 그 자리를 양보할 수밖에 없을 것이다. 미래 원자력이란 시대적 요건인 고유 안전성과 지속 가능성을 확보하고 경제성과 함께 핵확산 저항성이 전제되는 원자력 신기술로서 세계와의 경쟁 대상이다. 여기에 핵연료 자원의 유한성에 지속 가능성을 확보하기 위해서 우라늄 효율을 극대화하는 제4세대의 고속로 개발까지 우리나라는 선도적 위치로 가야 한다. 이 기술 개발 역시 출발은 늦었지만 적극적인 개발을 추진하고 있어 소듐고속로의 시현 원자로인 PGSFR을 2028년까지 완성하는 목표를 달성하면, 이를 근간으로 세계 선진국의 경쟁 대열에 나설 수 있다. 정부의 적극적인 지원이 선도적 위치에 갈 수 있는 지름길이다. 고속로 기술 개발과 관련하여 사용후핵연료(SF)의 국가 정책이 아직 확정되지 않아 재활용주기를 전제하고 있는 고속로 개발에 어려움을 주고 있다. 따라서 SF 부지를 2028년까지 확정하는 일정과 함께 국가 SF 정책이 조속히 확정되어야 한다.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.863-870
• /
• 2016

We investigated the physical/chemical phenomena that a slow loss of $CO_2$ inventory into sodium after the sodium-$CO_2$ boundary failure in printed circuit heat exchangers (PCHEs), which is considered for the supercritical $CO_2$ Brayton cycle power conversion system of a sodium-cooled fast reactor (SFR). The first phenomenon is plugging inside narrow sodium channels by micro cracks and the other one is damage propagation referred to as wastage combined with the corrosion/erosion effect. Experimental results of plugging shows that sodium flow immediately stopped as $CO_2$ was injected through the nozzle at $300{\sim}400^{\circ}C$ in 3 mmID sodium channels, whereas sodium flow stopped about 60 min after $CO_2$ injection in 5 mmID sodium channels. These results imply that if pressure boundary of sodium-$CO_2$ fails a narrow sodium channel would be plugged by reaction products in a short time whereas a relatively wider sodium channel would be plugged with higher concentration of reaction products. Wastage by the erosion effect of $CO_2$ (200~250 bar) hardly occurred regardless of the kinds of materials (stainless steel 316, Inconel 600, and 9Cr-1Mo steel), temperature ($400{\sim}500^{\circ}C$), or the diameter of the $CO_2$ nozzle (0.2~0.8 mm). Velocities at the $CO_2$ nozzle were specified as Mach 0.4~0.7. Our experimental results are expected to be used for determining the design parameters of PCHEs for their safeties.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2008.05a
• /
• pp.199-200
• /
• 2008

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.249-250
• /
• 2009

• Journal of the KSME
• /
• v.50 no.3
• /
• pp.37-41
• /
• 2010

미래형원전은 2030년 이후 본격적인 상업화를 목표로 우리나라를 포함한 세계 각국이 경쟁적으로 개발하고 있는 원자로이다. 이 글에서는 우리나라가 중점 추진하는 미래형원전인 소듐냉각고속로(SFR) 및 초고온가스로(VHTR)의 운전특성과 핵심기기에 사용될 후보재료를 소개하고 이와 관련하여 국내에서 수행 중인 연구 현황을 소개하였다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2012.05a
• /
• pp.403-404
• /
• 2012

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.12 no.1
• /
• pp.101-106
• /
• 2016

NSSS (Nuclear Steam Supply System) and BOP (Balance of Plant) design works for PGSFR (Prototype Gen-IV Sodium Fast Reactor) have been conducted in Korea. NSSS major components, e.g. reactor vessel, steam generator and secondary sodium main pipes, are designed according to the rule of ASME boiler and pressure vessel code division 5, in which DBA (Design by Analysis) methods are used in the stress assessments. However, there is little discussions about detail rules for BOP piping design. In this paper, the detail methodologies of BOP piping stress assessment are discussed including safety systems and non-safety system pipings. It is confirmed that KEPIC MGE(ASME B31.1) and ASME BPV code division 5 HCB-3600 can be used in stress assessments of non-safety pipes and class B pipes, respectively. However, class A pipe design according to ASME BPV code division 5 HBB-3200 has many difficulties applying to PGSFR BOP design. Finally, future development plan for class A pipe stress assessment method is proposed in this paper.

• Journal of computational fluids engineering
• /
• v.21 no.1
• /
• pp.19-29
• /
• 2016

A Prototype Gen-IV Sodium-cooled Fast Reactor which is one of the $4^{th}$ generation nuclear reactors is in development by Korea Atomic Energy Research Institute. The reactor is composed of four main fluid systems which are categorized by its functions, i.e., Primary Heat Transport System, Intermediate Heat Transport System, Decay Heat Removal System and Sodium-Water Reaction Pressure Relief System. The coolant of the reactor is liquid sodium and sodium-to-sodium heat exchangers are installed at the interfaces between two fluid systems, Intermediate Heat Exchangers between the Primary Heat Transport System and the Intermediate Heat Transport System and Decay Heat Exchangers between the Primary Heat Transport System and the Decay Heat Removal System. For the design and performance analysis of the Intermediate Heat Exchanger and the Decay Heat Exchanger, a computer code was written during previous step of research. In this work, the computer code named "SHXSA" has been validated preliminarily by computational fluid dynamics simulations.