• Journal of Korea Foresty Energy
• /
• v.18 no.2
• /
• pp.78-83
• /
• 1999

This study was carried out to investigate the strength and techanical feasibility of laminated lumber from small-diametered Pinus densiflora. Small lumber is currently not used for structural laminated lumber sonstruction, but its properties may of elasticity(MOE). Twenty specimens were compared for each beam from laminae. The results showed that actual beam MOE values exceeded slightly the preducted values. Based on the evaluation and analysis of thirty six Pinus densiflora laminated beams, a bending strength of 673 kgf/$cm^{2}$, and MOE of 98,200 kgf/$cm^{2}$ were obtained. It was suggested that this small lumber may be a candidate for structural laminated beam construction to provide the proper combinations of laminae.

• Journal of Forest and Environmental Science
• /
• v.9 no.1
• /
• pp.33-43
• /
• 1993

About 67% of all forest area in Korea belong to young age stands under II age class, including III age class which can be thinned under DBH 16cm, it comes up more than 90%. Therefore, thinking of the pressing necessity of thinning in our country this study describes the actual conditions analysis of the production of thinned small logs, points at issue and improvement measures of thinned timber production.

• 산림경영
• /
• s.64
• /
• pp.15-18
• /
• 1991

• Journal of Korea Foresty Energy
• /
• v.20 no.1
• /
• pp.73-80
• /
• 2001

This study was carried out to investigate the strength and technical feasibility of arch type laminated lumber from the domestic small lumbers(Pinus densiflora S. et Z. and Larix kampferi Catt.). Arch type lumbers manufactured with different compositions of laminae. It was designed to improve the strength and stiffness. Strength S. rt Z. U;timate load Carr. laminated lumbers were higher than that of the Pinus densiflora S. et Z. Ultimate load of 7-ply laminated lumbers were 2 times higher than the 5-ply laminated lumbers. The strength of finger jointed lumbers were found to be about 15.8% less than that of the no joint lumber. One solution for this problem is to use veneer as face lamina. The veneer laminated lumbers was considerably greater than that of the non-veneer laminated lumbers. It was suggested that this small lumber may be a candidate for high valued product member to provide the proper combination of laminae.

• Journal of Korea Foresty Energy
• /
• v.18 no.2
• /
• pp.70-77
• /
• 1999

The behaviors of alkali swelling in four major Korean woods were examined as a function of concentration cf alkali solution. Density of alkali-treated woods increased highly with increasing alkali concentration in both softwoods and hardwoods. Wood samples swelled in dimension during alkali swelling, and thereafter they shrank highly by water washing and air drying. The air-dried wood samples after alkali treatment showed almost isotropic shrinkage in tangential and radial direction.

• Journal of Korea Foresty Energy
• /
• v.22 no.1
• /
• pp.44-48
• /
• 2003

Flexural properties were investigated on clear specimens made from small diameter thinned trees of pitch pine (Pinus rigida Mill.), Japanese red pine (Pinus densiflora Sieb. et Zucc), Japanese larch (Larix kaempferi Carr.), and sawtooth oak (Quercus acutissima Carr.). MOR and MOE values of small clear specimen were depended on the species. The highest density of sawtooth oak shows the highest values of MOR and MOE. However, the lowest density of Japanese larch shows the lowest values of MOR. It was also shown that flexural properties could be predicted by stress wave MOE, since the correlations between stress wave MOE and flexural properties were relatively good.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.1
• /
• pp.65-73
• /
• 1993

• Journal of Korean Society of Forest Science
• /
• v.98 no.1
• /
• pp.49-54
• /
• 2009

This study aims to compare the profitability of using small diameter logs of Quercus species in terms of net profit (ratio), net income (ratio). The small logs of Quercus species could be used for the bed logs for shiitake mushroom and Phellinus linteus, sawdust, charcoal, and wood chip. The data of cost and revenue are collected by a face-to-face survey method from the associated factories. Our results show that the profitability for Phellinus linteus production is highest because its price has been formed high due to low market competition mainly resulted from capital service cost and production technique requirement. The next is followed by Shiitake mushroom, sawdust, wood chip, and charcoal. The study also reveals that profitability for long returning periods of investment is higher than that of short returning periods.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.301-308
• /
• 2014

Despite Korea forest take 63.7% of the nation's territory, productivity of domestic structural lumber is low. Studies of domestic small lumbers need to be improved domestic structural timber productivity. In this study, small diameter lumber and finger joint small diameter lumber took bending test to calculate MOE and MOR. MOE of small diameter lumber was $9.3kN/mm^2$ and MOE of finger joint small diameter lumber was $15.4kN/mm^2$. Allowable standard bending stress of small diameter lumber and finger joint small diameter lumber was calculated according to ASTM D 2915. Standard allowable bending stress of small diameter lumber was $12N/mm^2$ and standard allowable bending stress of finger joint small diameter lumber was $11N/mm^2$. Standard allowable bending stress of finger joint small diameter lumber should be considered to design structural beam members.

• Journal of Korea Foresty Energy
• /
• v.22 no.2
• /
• pp.60-68
• /
• 2003

In forest products industry, a variety of nondestructive evaluation techniques are now being used to assess the mechanical properties of structural lumber. Ultrasonic and longitudinal vibration technique are frequently used to assess the modulus of elasticity(MOE) of lumber. The objective of this research was to evaluate the MOE and modulus of rupture(MOR) of small-diameter of Larix log(Larix kaempferi Carr.), using these techniques. In this study, 50 small-diameter logs were nondestructiveively evaluated. The dynamic modulus of elasticity(Eu) of the logs was first evaluated, using an ultrasonic method. After ultrasonic tests, the logs were measured using a longitudinal vibration technique(Ev). Static bending test was then performed on the logs to obtain the static modulus of elasticity(Es) and modulus of rupture of these logs. In general, the dynamic MOE (Ev) of logs was closely co..elated with the stati, MOE for log. Based on the results of these experiments, it can be concluded that small-diameter Larix logs can be successfully evaluated by Ultrasonic and longitudinal vibration technique. The experimental results indicated that the ultrasonic technique is effective to the log, which contains many knots. The longitudinal vibration technique is effective to the log, in which many cracks are included.