• 대한기계학회논문집B
• /
• 제36권9호
• /
• pp.953-960
• /
• 2012

AMTEC기술은 열을 직접 전기로 변환시키는 기술로서 소디움을 작동유체로 사용하고 있으며, 작동유체의 순환은 모세관윅을 사용한다. 순환계통에는 증발부윅, 순환윅 및 응축부윅으로 구성되고, 각각의 윅은 소디움의 액체 또는 증기가 순환하면서 압력손실이 발생하므로 소디움의 순환을 위해서는 증발부윅의 모세관압력이 윅내의 총압력손실보다 커야만 한다. 본 연구에서는 100 watt급의 AMTEC시제품설계을 위해 소디움의 순환계통으로 구성되는 증발부윅, 순환윅 및 응축부윅에서의 압력손실과 증발부에서 응축부로의 열손실을 순환윅의 직경과 길이에 대해 분석하여 증발부윅의 소결입자 직경과 순환윅의 설계에 활용하코저 하였으며, 분석결과에서 순환계통의 총압력손실보다 큰 모세관압력을 위해서는 증발부윅의 소결입자크기는 10 ${\mu}m$이 적합한 결과를 얻었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2130-2135
• /
• 2007

Operating characteristics of a loop heat pipe (LHP) having a bypass line was investigated experimentally. The LHP had a sintered metal wick as a capillary structure and methanol as a working fluid. The sintered metal wick was made of stainless steel of which the average pore size was 5 ${\mu}m$and porosity of 47%. A bypass line of a small diameter was attached between the vapor escape passage and the liquid reservoir. The dimension of the flat evaporator was $50(L){\times}40(W){\times}30(H)$ mm and that of the condenser was $50(L){\times}40(W){\times}11(H)$ mm. Wall and pipe material of the LHP was stainless steel and heating area was 35(W) mm${\times}$35(L) mm. The inner diameters of vapor and liquid transport lines were 4.0 mm and 2.0 mm, and the lengths of the two lines were both 0.5 m. The LHP was tested for three different tilt angles of horizontal, favorite tilt, and adverse tilt. The thermal load range was up to 290 W at the condenser above evaporation position. Furthermore, the effect of a bypass line on the start-up transient as well as steady-state operation was presented and discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2357-2362
• /
• 2008

LHP is different from a conventional heat pipes in design and heat and fluid flow passages. The situations of the former is much complex than the latter. In LHPs, evaporation occurs at the contact interface between the heating plate and the porous wick, so some micro channels machined at the contact interface serve to let the vapor flow out of the evaporator. This complexity of contact geometry was known to cause a high resistance to heat flow. The present work was to study the problem of heat passage across the contact surface for LHPs and determine those values contact resistance. For two cases of contact structures, the thermal contact resistances were examined experimentally, one being obtained through mechanical contact under pressure and the other through sintered bonding. Nickel powder wick and copper plate were used for specimens. The result showed that a substantial reduction of contact resistance of an order of degree could be obtainable by sintered bonding.

• 대한기계학회논문집B
• /
• 제40권6호
• /
• pp.391-396
• /
• 2016

히트파이프에서 윅은 히트파이프의 열성능을 결정하는 데 중요한 역할을 한다. 여러 가지 형태의 윅 중 폼 타입 윅은 기공률과 유동 투과도가 높아서 윅의 모세관 펌핑 능력을 크게 향상시킬 수 있는 잠재능력을 갖고 있다고 평가된다. 본 논문에서는 폼 타입 윅의 투과도를 예측할 수 있는 모델을 광범위한 수치해석을 통해서 개발하였다. 제안된 관계식은 기존의 Kozeny-Carman 방정식을 확장한 형태를 갖고 있으며, Kozeny-Carman 계수들이 폼 타입 윅에 대해 기공률의 함수로 제시되었다. 제안된 관계식은 넓은 범위의 형상 변수에 대해서 기존의 실험 결과를 정확히 예측하는 것으로 드러났다. 폼 타입윅은 높은 기공률 때문에 기존 소결금속 윅의 모세관 성능을 획기적으로 향상시킬 수 있다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.479-482
• /
• 2006

The most the electronic industry has recently accelerated the modularization, the miniaturization and the high integrated trend of electronics fields such as electronics components, appliances and etc., the most increasingly the heat generation problem rises. Even though the conventional cooling technologies are widely used in order to reduce the heat loads, the technologies are not easy to meet the present trends due to the fact that most of many conventional methods are relative to external form environments such as size, design and so on. With regardless of those environments, however, a heat pipe is one of the most efficient systems to improve the heat transfer performance. And then the performance of the heat pipe depends on a wick structure. Of various wick structures, sintered metal wick is known so that it has some advantages such as smaller pore size, increasing porosity as well as high reliability. In this study sintered metal wicks, thickness 0.7 mm, 0.8 mm and 0.9 mm, were manufactured as of $100{\mu}m$ copper powder to obtain the manufacturing technology of heat pipes mounted with a sintered metal wick. Furthermore, experiments for the operational performance factors such as capillary limit, thermal resistance were not only performed but also compared with a theoretical model simultaneously. Experimental results agreed with the theoretical model, and then it seems to be required to study various development processes of sintered metal wicks for the high performance of a heat pipe system.