• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.126-129
• /
• 2003

저온 소성이 가능한 유전체재료 개발을 글래스-세라믹스 복합체를 제조하고자 하였다. $BNT(BaO-Nd_2O_3-TiO_2)$계 세라믹스를 기본조성으로 하고, 인산염계 글래스 프릿의 첨가를 통해 제조된 글래스-세라믹스 복합체의 소결특성 및 유전특성을 조사하였다. 글래스 프릿의 첨가량이 증가하고 소결온도가 높아질수록 소결 수축률과 상대밀도가 증가함을 알 수 있었으며, 글래스 프릿의 첨가량을 첨가하였을 경우 BNT계 세라믹스에서의 주결정상인 $BaNd_2Ti_5O_{14}$와 더불어 Hexagonal system을 갖는 $KCaNd(PO_4)_2$을 확인하였다. 복합체를 소결한 후 유전특성을 측정하였는데, 유전율(${\varepsilon}_r$)은 감소하는 경향을 나타내었다.

• Korean Journal of Materials Research
• /
• v.7 no.5
• /
• pp.374-380
• /
• 1997

열전재료 분말을 AI관에 진공봉입하고 형틀가입한 후 소결하는 새로운 방법으로 n형 B $i_{2}$T $e_{2.4}$S $e_{0.6}$를 제조하여 소결조건에 따른 소결성과 열전특성을 조사.분석하였다. AI은 소결시 열전재료와 반응하지 않아 보호 용기로 적합하였으며, 평균입도 195$\mu\textrm{m}$의 분말을 사용하여 성형압 280 MPa, 온도 400에서 50$0^{\circ}C$에서 소결할 경우 성능지수는 1.9x $10^{-3}$K였다.다.

• Electrical & Electronic Materials
• /
• v.3 no.3
• /
• pp.215-223
• /
• 1990

Y-Ba-Cu-O계 고온 초전도체를 소결, 소결+HIP encapsulation방법으로 각각 제작하였다. 소결은 900.deg.C~960.deg.C에서 하였으며 소결시편의 일부는 HIP처리 하였는데 이때 HIP조건은 150MPa Ar압력에서 800.deg.C, 30min이었다. HIP시편의 상대밀도는 90%~93%의 밀도를 갖는 소결시편보다 5%~8% 증가하였다. 열처리 조건에 따른 x-ray 회절분석은 사방정-정방정 상변태를 보여주었다. 임계온도(Tc)는 91.deg.k 에서 전기비정항이 급격히 감소하기 시작하여 89.deg.k에서 완전히 0이 되었으며 전이폭은 3.deg.k내로 매우 좁았다. 임계전류밀도(Jc)는 소결시편의 경우 전형적인 ~159A/$cm^{2}$의 값을 보였으나 HIP처리 후 ~89A/$cm^{2}$로 감소했기 때문이라 생각하였다. 경도와 인성은 각각 38GPa과 2.9MPam$^{1}$2/로 증가하였다.

• Journal of the Korean Magnetics Society
• /
• v.24 no.2
• /
• pp.56-59
• /
• 2014

The samples of $Ba_2CoZnFe_{12}O_{22}$ was synthesized by the solid-state reaction method. The toroids of $Ba_2CoZnFe_{12}O_{22}$ were sintered with various sintering temperature at 1050, 1100, 1150, and $1200^{\circ}C$, and studied by x-ray diffractometer, vibrating sample magnetometer, network analyzer, and Mssbauer spectrometer. From the XRD patterns, the density of samples increased with increasing sintering temperature. From the magnetic hysteresis curves up to 10 kOe at 295 K, the saturation magnetization ($M_s$) of $Ba_2CoZnFe_{12}O_{22}$ samples in various sintered at 1050, 1100, 1150 ,and $1200^{\circ}C$ were showed around $M_s$= 33.0 emu/g. However, With increasing sintering temperature, the coercivity ($H_c$) of samples decrease. Complex permeability and permittivity of samples in various sintering temperatures were measured between 100MHz to 4 GHz. With increasing sintering temperature, the permeability of samples increase.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.329-334
• /
• 1996

손상 핵연료의 온도 및 산소대 금속 비율의 변화모형을 연구하였다. 열역학적 분석과 산화과정에 대한 분석을 통해 손상핵연료에서의 핵연료 온도와 핵연료내 O/U값 변화를 기술함으로써 결함발생에 의한 핵연료내 냉각수 침투는 Gap conductance를 떨어뜨리고 소결체 산화에 따른 O/U값 증가로 열전달특성의 저하를 가져와 핵연료의 온도를 상승시킨다는 결과를 얻어냈다.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.1
• /
• pp.65-69
• /
• 2003

Microstructural and electromagnetic properties of YIG ferrites, (Y, Ca)-(Fe, V, In, Al)-O for Isolator/Circulator were investigated with the sintering temperature. YIG ferrites of $Y_{2.1}Ca_{0.9}Fe_{4.4}V_{0.5}In_{0.05}Al_{0.05}O_{12}$ were fabricated by sintering at $1300^{\circ}C$, $1330^{\circ}C$, $1350^{\circ}C$, $1370^{\circ}C$. Crystallographic and microstructural properties were measured using XRD and SEM. Saturation magnetization$(4{\pi}M_s)$ were measured using VSM, and FMR(Ferromagnetic Resonance) experiment was conducted to measure ferromagnetic resonance line width$({\Delta}H)$. Microwave characteristics of YIG ferrites were measured using a Network Analyzer. The YIG ferrite of $Y_{2.1}Ca_{0.9}Fe_{4.4}V_{0.5}In_{0.05}Al_{0.05}O_{12}$, sintered at $1350^{\circ}C$, showed higher density, saturation magnetization and lower ferromagnetic resonance line width than those sintered at any other temperature.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.11
• /
• pp.975-982
• /
• 2010

In this study, the laser sintering of inkjet-printed silver lines was evaluated. Silver-nanoparticle ink and a drop-ondemand (DOD) inkjet printer were used for printing on glass and polyethylene terephthalate (PET) substrates with various thicknesses. To sinter the printed silver nanoparticles, the silver layer printed on the transparent substrates was irradiated by focused CW laser beams that were incident normal to the substrates; the irradiation was carried out for various beam intensities and for various irradiation times. The electrical conductivity of the laser-sintered silver patterns was measured and compared with the conductivity of silver patterns sintered by using an oven. The increase in the temperature caused by laser irradiation was also calculated on the basis of the laser beam intensity, irradiation time, surface reflectivity, and thermophysical property of the substrate in order to estimate the increase in the electrical conductivity caused by laser sintering.

• Korean Journal of Materials Research
• /
• v.5 no.1
• /
• pp.36-41
• /
• 1995

Dielectric properties were investigated at Mn doped $(Pb_{1-x}Ca_{x})ZrO_{3}$ with x=0.38 in microwavefrequencies. Both the density and Q values of sintered ceramics increased with increasing calciningtemperature. In the sample sintered at $1300^{\circ}C$ for 2 hrs, the deped Mn ions completely solubled in $(Pb,Ca)ZrO_{3}$ phase until 0.5wt% and the grain size was independent of doping amount. It was observed thathigh dielectric constant of 90 - 100 and high quality factor of 1300 at 4 GHz for O.l5wt% Mn doped$(Pb_{0.62}Ca_{0.38})ZrO_{3}$. The Mn" and Mn" worked as acceptors in $(Pb,Ca)ZrO_{3}$ which created the oxygen vacancies and affected the increment of the Q values. However, the excess Mn doping more than 0.5wt% resulted in decreasing Q values.decreasing Q values.

• Journal of the Korean Ceramic Society
• /
• v.24 no.3
• /
• pp.207-214
• /
• 1987

This paper is to determine the effect of binder burnout time and heating rate on the electrical propertries of type II multilayer ceramic capacitors(MLC). The quality of multilayer ceramic capacitor depends suitable on the binder burnout time, which is determined for at least 24 hours in the PVB-binder system. It is suggested that theelectrical properties of multilayer ceramic capacitor is due to the control of heating rate, with the dipole moment density from grain size distributiion. Comparing the fast firing with slow, we observed a small but consistent improvement in the electrical properties.

• Journal of the Microelectronics and Packaging Society
• /
• v.1 no.2
• /
• pp.105-112
• /
• 1994

BaTiO3 의 B-site에 0-0.03 몰 범위의 NiO를 첨가한 Ba1-xSrxTi1-y-wNiyZrwO3-y 유전 체에서 NiO 첨가가 유전특성 및 절연저항의 내환원성에 미치는 영향을 조사하였다. B-site Ni 치환에 의해 a 축의 격자상수는 증가하고 c 축의 격자상수는 감소하여 정방성 c/a가 감 소하였으며 단위격자의 부피는 증가하였다. NiO 첨가에 따라 큐리온도는 저온으로 이동하 였으며 큐리온도의 변화율은 소결분위기에 영향을 받았다. NiO가 첨가되지 않은 조성에서 는 산소분압 109 MPa의 환원분위기 소성에 의해 비정항이 107$\Omega$.cm로 저하되었으나 0.01 몰이상의 NiO를 첨가한 조성에서는 공기중 소결시 얻을수 있었던 1011$\Omega$.cm로 저하되었으 나 0.01 몰 이상의 NiO를 첨가한 조성에서는 공기중 소결시 얻을 수 있었던 1011$\Omega$.cm 이 상의 비저항을 유지하였다.