• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.05a
• /
• pp.228-230
• /
• 2005

본 연구에서는 생활 폐기물의 소각 바닥재를 사용하여 입도 분리한 후 각 입도별 철 비철 금속이 함유된 바닥재를 자력세기에 따라 분리하였다. 철의 분석결과 4mesh이상의 입자에서 대부분의 철이 회수되었고 4mesh이하에서는 철의 함유량이 적었지만 50mesh 이하의 입자에서는 자력에 의해 대부분 분리되었다. 또한 각 입도에 따른 자력세기별로 철의 회수율을 측정한 결과 $25{\sim}130gauss(30{\sim}150volt)$에서는 낮은 회수율을 보였고 380gauss(150volt이상)의 높은 자력에서만 분리가 일어남을 확인할 수 있었다. 비철은 대부분 4mesh에서 분포하였고 전체적으로 낮은 양이 존재하였다.

• Resources Recycling
• /
• v.6 no.2
• /
• pp.5-11
• /
• 1997

It presents the amounts of used plastics praduccd in recent years in comparison with the total municipal waste sewage produced in lapan. 'Ex needs of appropriate policies and guidelines to handle various used plastic mzterials are presened and haw such policies and guidelines are currently being mapped out in Japan is also described.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.12
• /
• pp.1079-1089
• /
• 2013

The flow characteristics in a solid particle incinerator are investigated numerically for high burning rate of wastes. The studied incinerator employs both a swirl flow used in the furnace of powerplants and a design concept applied to a rocket combustor. As the first step, the non-reactive flow field is analyzed in the incinerator with primary and secondary injectors through which solid fuel and air are injected. The deflection angle of a primary injector, inclination angle of a secondary injector, and gap between the two types of injectors are selected as design parameters. The swirl number is adopted for evaluating the degree of swirl flow and estimated over wide ranges of three parameters. The swirl number increases with deflection angle, but it is affected little by inclination angle. Recirculation zones are formed near the injectors, and their size affects the swirl number. The swirl number decreases with the zonal size of recirculation. From the numerical results, the design points can be found with strong swirl flow.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.83.2-83.2
• /
• 2000

• Analytical Science and Technology
• /
• v.15 no.1
• /
• pp.43-53
• /
• 2002

The analysis of polychlorodibenzo-p-dioxins (PCDDs) and polychlorodibenzo furans(PCDFs) was performed by using four different gas chromatographic columns (SP-2331, DB-5, DB-17 and DB-DIOXIN). The data reported is pertaining to flue gas, fly ash, ambient air, soil and fish. The difference in quantification of samples according to four columns was observed, it was noted that major difference was observed in the flue gas when compared with soil, fly ash, ambient air and fish. The quantification of the same samples according to four columns it was also found that DB-5 column have the highest concentration whereas SP-2331 column showed the lowest concentration. The quantification of DB-17 column for 1,2,3,6,7,8-HxCDF was found to be twice and three times higher when compared with other columns, whereas the quantification of DB-DIOXIN column for 1,2,3,7,8-PeCDD was also found to be over estimated twice when compared with other columns.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.51-57
• /
• 2014

A MILD(Moderate and Intense Low oxygen Dilution) combustion, which is effective in the reduction of NOx, is considerably affected by the recirculation flow position of hot exhaust gas to the combustion furnace. A numerical analysis was accomplished to elucidate the flow characteristics in the MILD combustion incinerator for several cases with or without exhaust gas recirculation. It could be seen from the result of the present numerical study that the flow recirculation could be observed in the upper region over the vertical dividing wall for the case without exhaust gas recirculation. The optimal position of exhaust gas recirculation position was derived by the comparison of %RMS of x directional velocity for the cases with exhaust gas recirculation. The case with the exhaust gas recirculation position at the upper right of free board was the most effective with the smallest value of 57.4% RMS.

• Analytical Science and Technology
• /
• v.27 no.6
• /
• pp.347-351
• /
• 2014

This study determinated the polychlorinated dibenzo-${\rho}$-dioxins and dibenzofurans (PCDDs and DFs) in fly ash and bottom ash of industrial waste incinerators. Experimental results showed that average PCDDs and DFs concentrations in fly ash were 4.5063 and 13.004 ng-TEQ/g, and in bottom ash were 0.2367 and 0.0993 ng-TEQ/g, respectively. Predominant congener in TEQ of PCDDs/DFs from fly ash were 1,2,3,4,6,7,8-HpCDD, OCDD, 2,3,4,6,7,8-HxCDF, 2,3,4,7,8-PeCDF and in bottom ash were 1,2,3,7,8-PeCDD and 2,3,4,7,8-PeCDF.

• Journal of the Korean Institute of Gas
• /
• v.16 no.4
• /
• pp.52-58
• /
• 2012

Recently, waste gas incineration is increasing due to strong environmental regulatory system in Korea. These incinerating facilities are usually connected with the top of the storage tank through pipeline and incinerate off gas with the flame. Therefore, the flame originated from these facilities is likely to move back into pipeline and might cause an explosion of the storage tank. Accordingly, the purpose of this study is to suggest the preventive measures and the way to improve the safety of these incineration systems through the cause analysis of a major industrial accident occurred in a acrylic acid manufacturing process in Korea. As a result of the study, the preventive measures are suggested as follows. (1) Air or inert gas inflow facilities should be well designed to dilute flammable gases into air or inert gas sufficiently before the blower is restarted in order to prevent the explosion (2) It is needed for the detonation-type flame arresters to be installed on the top of the storage tanks. (3) In case of using the deflagration-type flame arresters, it is necessary to install a rupture disk before the arresters, or blow off the flame outside tanks by connecting the tank top and the incinerator with hood-type pipe. (4) TDR should be installed to be restarted automatically after the momentary power failure.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.5
• /
• pp.5-13
• /
• 2008

In this study, It was carried out to evaluate the feasibility of recycled crushed concrete as aggregate used cement mortar replace sand and to investigate engineering properties of recycled aggregate for hazardous waste solidification. The compressive strength of cement mortar replaced 5-15% (wt.) recycled aggregate was over $163kgf/cm^2$ which is the standard of first grade concrete block class C. And cement mortar was examined to evaluate the stability by leaching test. Cu, Cd, Pb, Cr, and As as the heavy metals were proved very stable but mercury (Hg) was leached high concentration because it was simply tied to the cement surface. We investigated the crystal structures of cement mortar and they had shown the peaks of $Ca(OH)_2$, ettringite, and CSH (calcium silicate hydrate). As the result, the longer curing time, the higher CSH peak that means to increase compressive strength and the cement mortar was more stable. Therefore it was shown that it may be possible to apply hazardous waste solidification using recycled aggregate, fly ash and sewage sludge ash.

• Journal of Biosystems Engineering
• /
• v.22 no.1
• /
• pp.21-29
• /
• 1997

왕겨 재를 분쇄하여 콘크리트 混和용 재료로 이용하려는 연구의 일환으煙로서, 파이로트 規模의 多目的 왕겨 燒却爐를 設計, 裂作하고 그 性能을 分析하였다. 왕겨 燃燒時의 熱에너지는 回收하여 원예施設의 煖房이나 콘크리트의 高溫 養生水로써 이용하고자 熱交煥裝置를 제작하여 왕겨 燒각爐시스템에 장착하였고, 排煙가스내의 이산화탄소가 시설원예 作物의 光合成에 이용될 수 있는지 排煙가스의 造成을 조사하였다. 분쇄된 왕겨 재의 큰크리트 混和材로서의 적합성은, 燃燒 灰分의 성분 중 $SiO_2$ 의 結晶化 상태를 分析함으로써 判斷하였다. 연구결과를 要約하면 다음과 같다. 1. 왕겨 灰分의$SiO_2$ 結晶化는 燃燒온도 $750^circ C$ 이하에서는 거의 발생하지 않는 것으로 분석되었다. 2. 燒却爐의 작동은 매우 만족스러웠으며 最適 작동조건은 왕겨供給率 15kg/h. 制御온도 $600^{\circ}C$로 分析되었다. 最適 작동조건에서, 왕겨燃燒率은 97%, 熱交換機 效率은 59.5%, 전체 시스템의 熱效率은 57.7%로서 양호하였으며, 灰分의 $SiO_2$ 結晶化도 거의 발생하지 않아 生成된 왕겨 灰分은 훌륭한 큰크리트 混和在로 판단 되었다. 3. 燒却爐내 溫度分布는 대체로 均一하였으며, 排煙가스내의 大氣오염물질 중, 질소酸化物과 황酸化物 함량은 許容기준치보다 매우 낮았으나 일산화탄소 함량은 許容기준값 부근으로 나타나 排煙가스를 직접 원예시설 내에 공급하기 위해서는 약간의 연소실 구조 개선이 필요하다고 판단되었다.