• Clean Technology
• /
• v.13 no.1 s.36
• /
• pp.34-45
• /
• 2007

Phase behavior of the ternary systems of water-insoluble simvastatin drug, which is well known to be effective drugs for hypercholesterolemia therapy, in solvent mixtures of dichloromethane and supercritical carbon dioxide was investigated to present a guideline of establishing operating conditions in the particle formation of the drugs by a supercritical anti-solvent recrystallization process utilizing dichloromethane as a solvent and carbon dioxide as an anti-solvent. The solubilities of simvastatin in the mixtures of dichloromethane and carbon dioxide were determined as functions of temperature, pressure and solvent composition by measuring the cloud points of the ternary mixtures at various conditions using a high-pressure phase equilibrium apparatus equipped with a variable-volume view cell. The solubility of the drug increased as the dichloromethane composition in solution and the system pressure increases at a fixed temperature. A lower solubility of the drug was obtained at a higher temperature. The second half of this work is focused on the particle formation of the simvastatin drug by a supercritical anti-solvent recrystallization process in a cylindrical high-pressure vessel equipped with an impeller. Microparticles of the simvastatin drug were prepared as functions of pressure (8 MPa to 12 MPa), temperature (303.15 K, 313,15 K), feed flow rate of carbon dioxide, and stirring speed (up to 3000 rpm), in order to observe the effect of those process parameters on the size and shape of the drug microparticles recrystallized.

• Journal of the Korean Society of Radiology
• /
• v.4 no.2
• /
• pp.27-30
• /
• 2010

A X-ray optical modulator measures x-ray dose using optical transmissivity ratio change of the liquid crystal cell. To apply in this optical modulator, we made photoconductor films and compared electrical properties of this films in this study. Photoconductors are deposited on ITO glass with $200{\mu}m$ using the percipitation method and print method. I-V test was conducted to alalyze electrical properties of this films and measured darkcurrent and SNR was acquired using the measured dark current and sensitivity. As a result of this measurements, $HgI_2$ film made by precipitation method is lower(about 40%) darkcurrent than $HgI_2$ films made by precipitation method and sensitivity is two times greater than print method. And we knew that $HgI_2$ films were also 10~25 times greater SNR at $1v/{\mu}m$ than $PbI_2$, PbO, CdTe film made by precipitation method. This results suggest that $HgI_2$ films made by precipitation method has improved characteristics of x-ray dose meter by applying in x-ray optical modulator.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.554-559
• /
• 2011

To improve the safety and electrode characteristics of lithium metal anode, physically coated electrodes on lithium metal surface by three kinds of carbon are prepared and their charge-discharge performances are investigated by adopting the C-Li electrodes as the anode of rechargeable lithium batteries. The lithium anode coated by the carbon powder with smaller particle size and higher surface area, which has higher packing density and lower surface roughness, shows better performance in charge-discharge characteristics. The carbon coating on lithium surface can be more effective in small-sized cells.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.51-54
• /
• 2002

Recently, due to its better photosensitivity in X-ray, the amorphous selenium based photoreceptor is used on digital direct method conversion material. Compared to other photoconductive material, amorphous selenium has good X-ray response characteristic and low leakage current. It has many parameters of detecting X-ray response on selenium. Among of them, it is well known that manufacture of a-Se is the most basic element. In this paper, we fabricated two types of amorphous selenium sample which had time variable. The one was fabricated continuous deposition sample and the other was step by step sample. Thickness of sample was $300{\mu}m$ and top electrode was evaporated gold. We investigated the leakage current and photo current of them and analysed their electrical characteristics. For analyzing morphology of samples, SEM and surface was pictured. We found that step by step deposition method could be applied for novel fabricating amorphous selenium film.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.336-339
• /
• 2017

스마트폰 서드 파티 애플리케이션에 대한 포렌식 분석은 최근 수 년 간 탐구되어야 할 새로운 영역으로 떠올랐다. 현재 스마트폰 시장은 그 규모를 측정하는 것이 무의미할 만큼 커졌으며 각 스마트폰 플랫폼의 앱(App)마켓에는 셀 수 없이 많은 서드 파티 애플리케이션이 존재한다. 모바일 포렌식 소프트웨어 도구들은 일반적으로 연락처, 문자메시지, 통화기록 등의 전형적인 데이터를 수집한다. 이러한 도구들은 서드 파티 애플리케이션이 기기 내부에 저장하는 정보들을 간과하기 쉽다. 여러 제조사 중, 애플사의 모바일 기기에 설치된 많은 서드 파티 애플리케이션은 수사에 도움이 되는 많은 정보와 관련있는 디지털 증거를 남긴다. 이런 잠재적 증거들은 기기 내부에 저장되기도 하며, 비교적 손쉬운 방법으로 법정에 제출 가능하다. 스마트폰으로 이루어지는 많은 활동은 상당 부분 서드 파티 애플리케이션으로 이루어지며, 사이버 범죄 사건의 중심에 스마트폰이 있다면 서드 파티 애플리케이션 분석을 통한 핵심 증거 획득이 사건을 해결할 가능성이 높아진다. 본 논문에서는 스마트폰에서 널리 쓰이고 있는 소셜네트워크 애플리케이션인 '인스타그램(Instagram)'에서 행해진 포렌식 분석에 초점을 맞추고, 기기는 전 세계 적으로 가장 사용자 점유율이 높은 스마트폰인 아이폰에서 이루어졌다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.123.2-123.2
• /
• 2011

$ALU^+$ 태양전지는 PN접합을 후면에서 즉, Al을 소성하여 형성시키기 때문에 얼마나 균일하고 두껍게 형성하는 것이 가장 중요하다. 소성(Firing)은 태양전지 제조 과정에서 후면의 접촉을 위한 중요한 공정이다. 본 연구에서는 상업화가 가능한 n-type $ALU^+$ Emitter 태양전지에서 소성 횟수에 따른 특성을 연구 하였다. $ALU^+$ emitter 형성의 최적화를 위해 소성온도를 가변하고, 최적화된 온도에서 소성 횟수에 따른 DIV 측정을 통해 셀을 분석 하였다. 소성 횟수는 1~3회로 하였고, 그 결과 단락전류 밀도(Jsc)가 33.57mA/$cm^2$로 처음보다 15.1%증가 하였고, 곡선인자(Fill Factor)는 3회에서 66.04%로 218%증가 하였다. Al을 짧은 시간 안에 소성을 시키므로 해서 후면의 $P^+$ Emitter가 균일하게 형성되었기 때문에 개방전압(Voc)의 증가를 확인하였다. 본 연구를 통해 $ALU^+$ 태양전지의 후면 Aluminium 소성 조건의 최적화를 통하여 $ALU^+$ emitter가 충분히 형성되지 못하면 누설전류가 발생되고 직렬저항(Rs)이 크게 증가하여 개방전압(Voc) 및 단락전류밀도(Jsc)의 감소가 발생하게 되고, 직렬저항(Rs)의 증가와 병렬저항(Rsh)의 감소는 Fill Factor의 급격한 감소를 초래하게 됨을 알 수 있다. 이를 개선하면 태양전지 효율을 상승시키는 결과를 얻을 수 있음을 확인하였다.

• Korean Management Science Review
• /
• v.16 no.1
• /
• pp.157-171
• /
• 1999

In a increasingly competitive marketplace, the manufacturing companies have no choice but looking for ways to improve productivity to sustain their competitiveness and survive in the industry. Recently cellular manufacturing has been under discussion as an option to be easily implemented without burdensome capital investment. The objective of cellular manufacturing is to realize many aspects of efficiencies associated with mass production in the less repetitive job-shop production systems. The very first step for cellular manufacturing is to group the sets of parts having similar processing requirements into part families, and the equipment needed to process a particular part family into machine cells. The underlying problem to determine the part and machine assignments to each manufacturing cell is called the cell formation. The purpose of this study is to develop a clustering algorithm based on the neural network approach which overcomes the drawbacks of ART1 algorithm for cell formation problems. In this paper, a generalized learning vector quantization(GLVQ) algorithm was devised in order to transform a 0/1 part-machine assignment matrix into the matrix with diagonal blocks in such a way to increase clustering performance. Furthermore, an assignment problem model and a rearrangement procedure has been embedded to increase efficiency. The performance of the proposed algorithm has been evaluated using data sets adopted by prior studies on cell formation. The proposed algorithm dominates almost all the cell formation reported so far, based on the grouping index($\alpha$ = 0.2). Among 27 cell formation problems investigated, the result by the proposed algorithm was superior in 11, equal 15, and inferior only in 1.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.84-87
• /
• 2010

Copper-indium-diselenide (CIS) particles were prepared by the electrochemical reduction from the mixture solution of corresponding ion compounds. The prepared CIS was used as an insertion layer or a blending component in the organic photovoltaic bulk heterojunction cells composed of poly(3-octylthiophene) and fullerene. The increase of CIS content resulted in the rapid decrease of the open-circuit voltage as well as short-circuit current. The photovoltaic parameters were analyzed in relation to the structures, composition, and morphology of the photovoltaic blends.

• Membrane Journal
• /
• v.11 no.2
• /
• pp.89-95
• /
• 2001

Polysulfone membranes containing an inorganic fluor, cerium activated yttrium silicate (CA Y5), were prepared via the phase inversion technique. The casting solutions with the fluor' were solidified to result in a membrane by using two different nonsolvent coagulants, water and isopropanol. In the process, the fluor worked as a monitioring agent for investigating the characteristics of the phase inversiun process. On the initial contact with water as nonsolvent, the induction of rapid polymer collapse results.in the entrapment of the fluor in the formed membrane structure. Impregnated fluor is dispersed in the polymer structure rather than being enveloped by polymer molecules. In comparison, the fluor is localized in the cell-like structure of membrane, as the cast solution film is cuagulated by immersion into a isopropanol bath.

• Journal of the Korean Ceramic Society
• /
• v.36 no.9
• /
• pp.954-964
• /
• 1999

The effect of fabrication variables and microstructures on the compressive strength of open cell alumina zirconia and silicon nitride ceramics fabricated by polymeric sponge method was investigated. Bulk density and compressive strength of open cell ceramics were mainly affected by coating characteristics of ceramic slurry on polymeric sponge that controlled a shape thickness and defect of the struts. Sintering temperature was optimized for enhancement of strut strength and compressive strength of open cell ceramics. Relative density and compressive strength behaviors were relatively well matched with the predicted values. Open cell ceramics of lower relative density below 0.1 prepared by first relatively well matched with the predicted values. Open cell ceramics of lower relative density below 0.1 prepared by first coating of ceramic slurry had thin triangular prismatic struts that were often broken or longitudinally cracked. With an application of second coating of slurry shape of struts was transformed into thickner cylindrical one and defects in struts were healed but the relative density increased over 0.2 Open cell zirconia had both the highest bulk density and compressive strength and alumina had the lowest compressive strength while silicon nitrides showed relatively high compressive strength and the lowest density. Based upon the analysis open cell silicon nitride was expected to be one of potential structural ceramics with light weight.