• 제목/요약/키워드: 셀룰로스 아세테이트 지지체

검색결과 3건 처리시간 0.018초

개질된 Nanoscale Zero-Valent Iron을 이용한 질산성질소 처리 (Removal of Nitrate by modified Nanoscale Zero-Valent Iron)

  • 김홍석;안준영;황경엽;박주양;황인성
    • 상하수도학회지
    • /
    • 제23권4호
    • /
    • pp.471-479
    • /
    • 2009
  • A Nanoscale Zero-Valent Iron(NZVI) was modified to build a reactor system to treat nitrate. Shell layer of the NZVI was modified by slow exposure of the iron surface to air flow, which produced NZVI particles that are resistant to aerial oxidation. A XANES (X-ray Absorption Near-Edge Structure) analysis revealed that the shell consists of magnetite ($Fe_3O_4$) dominantly. The shell-modified NZVI(0.5 g NZVI/ 120 mL) was able to degrade more than 95% of 30 mg/L of nitrate within $30 hr^{-1}$ ( pseudo first-order rate constant($k_{SA}$) normalzed to NZVI surface area ($17.96m^2/g$) : $0.0050L{\cdot}m^{-2}{\cdot}hr^{-1}$). Ammonia occupied about 90% of degradation products of nitrate. Nitrate degradation efficiencies increased with the increase of NZVI dose generally. Initial pH values of the reactor systems at 4, 7, and 10 did not affect nitrate removal rate and final pH values of all experiments were near 12. Nitrate removal experiments by using the shell-modified NZVI immobilized on a cellulose acetate (CA) membrane were also conducted. The nitrate removal efficiency of the CA membrane supported NZVI ($k_{SA}=0.0036L{\cdot}m^{-2}{\cdot}hr^{-1}$) was less than that of the NZVI slurries($k_{SA}=0.0050L{\cdot}m^{-2}{\cdot}hr^{-1}$), which is probably due to less surface area available for reduction and to kinetic retardation by nitrate transport through the CA membrane. The detachment of the NZVI from the CA membrane was minimal and impregnation of up to 1 g of NZVI onto 1 g of the CA membrane was found feasible.

미세입자, 휘발성유기화합물 차단을 위한 전기방사 창문 필터 (Development of Window Filters Using an Electrospinning Technique to Block Particulate Matter and Volatile Organic Compound)

  • 김순호;한상일
    • Korean Chemical Engineering Research
    • /
    • 제61권3호
    • /
    • pp.401-406
    • /
    • 2023
  • 산업이 발달함에 따라 미세먼지는 환경, 건강, 생활 등 다양한 분야에서 문제를 일으키고 있으며, 특히 대기오염에 의해 발생되는 미세먼지는 심각한 환경문제로 대두되고 있다. 따라서 본 연구에서는 전기방사 기술을 적용하여 실리콘 지지체에 셀룰로스아세테이트 고분자 섬유를 방사하여 미세입자를 차단하고, 활성탄 입자를 첨가하여 휘발성유기 화합물을 제거하고자 하였다. 활성탄 비율과 전기방사 시간을 달리하여 활성탄 비율, 필터 두께에 따른 미세먼지 차단효과, 톨루엔 흡착 성능을 분석하였다. 그 결과 전기방사시간이 증가함에 따라 1~3 ㎛ 크기의 입자가 효과적으로 차단되었으며, 활성탄의 양이 0%에서 5%로 증가함에 따라 톨루엔 흡착량이 증가하는 것으로 나타났다. 전기방사 시간이 길어질 경우 필터 두께 증가로 인해 빛 투과가 현저히 떨어졌으며, 20~30분 전기방사한 필터의 경우 빛이 투과하여 창문 필터 적용 가능성을 보여주었다.

공유결합으로 다공성 막에 고정화된 PLD에 의한 포스퍼티딕산 생산 (Phosphatidic Acid Production by PLD Covalently Immobilized on Porous Membrane)

  • 박진원
    • 청정기술
    • /
    • 제21권4호
    • /
    • pp.224-228
    • /
    • 2015
  • 포스포라이페이즈디를 공유결합을 통해서 초미세다공성막에 고정화하였다. 고정화는 폴리에틸렌이민, 글루타알데하이드, 포스포라이페이즈디를 순차적으로 처리함으로써 수행되었다. X선 광전자 분광기를 이용하여 고정화가 확인되었다. 포스퍼티딜콜린이 분산된 버퍼용액의 pH값을 시간에 따라 모니터링하여 고정화된 경우와 그렇지 않은 경우에 대해 촉매활성을 산출하였다. 속도상수는 폴리스타이렌나노입자에 고정화된 포스포라이페이즈디에서는 0.64 s-1, 다공성 셀룰로스아세테이트막에 고정화된 포스포라이페이즈디에서는 0.52 s-1, 그리고 고정화되지 않은 포스포라이페이즈디에서는 0.75 s-1의 결과가 도출되었다. 재사용에 대한 연구가 10차례까지 수행되었으며, 초기 사용시의 활성대비로 95%가 유지되었다. 열과 저장성에 대한 안정성도 고찰되었으며, 다공성막에 고정화된 포스포라이페이즈디의 경우에 활성손실이 가장 적은 것으로 관찰되었다. 이 연구결과들로부터, 포스퍼티딕산의 생산용 포스포라이페이즈디의 고정화에 대한 지지체로 다공성 막을 사용할 수 있음을 알 수 있다.