• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.17-26
• /
• 2005

The random pulse width modulation(RPWM) in inverter-fed induction motor drive is presented. This paper describes a RPWM method based on space vector PWM strategy for shaping the switching noise spectrum in such a way it can merge with the natural system noise. To verify the validity of the proposed RPWM scheme, the experiment based on the DSP56F803 microprocessor was executed finally, the simulation and experimental results will be given to demonstrate the effectiveness of the unposed RPWM scheme.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.05a
• /
• pp.473-477
• /
• 2004

Cotton fabric was treated with Cationon UK(tertiary ammonium salt) to improve the dyeability to black tea colorants. In order to investigate the efficacy of Cationon UK for improving dyeing properties of cotton fabric, the effect of Cationon UK treatment conditions and dyeing conditions on dye uptake of the cotton fabrics treated with Cationon UK were examined and the colorfastness to washing, perspiration, rubbing and light was also evaluated for practical uses. Cationized cotton treated with Cationon UK showed high dye uptake at lower dyeing concentration and shorter dyeing time, compared with untreated. Dyeing temperature did not affect significantly dye uptake and the maximum dye uptake was obtained at pH 5. Most colorfastness was relatively good, showing 4/5∼5 rating.

• The Research Journal of the Costume Culture
• /
• v.22 no.3
• /
• pp.503-510
• /
• 2014

Nowdays, costumer's washing behavior were often times for remove to light-duty dirt. The purpose of this study is to provide the most effective washing conditions of detergent concentration and temperature conditions for help save energy and water resources required to the washing process. Washing conditions were as follows: 2 kinds of detergents and 4 types of artificially soiled fabrics were used. Detergent concentration was 0%, -10%, and -20% below the recommended conc. of manufacturer's standard. Temperature of bath was $20^{\circ}C$ and $40^{\circ}C$. The results of this study were as follows: First, washing performances of all kind of artificially soiled fabric improved as the temperature of bath at $40^{\circ}C$. Second, the test was conducted under the condition of decreasing respectively -10% and -20% below of the recommended concentration of manufacturer's standard detergent. The average of washing efficiency was not considerably affected by the reduction of 10% below of manufacturer's standard. Third, in case of the water temperature were $20^{\circ}C$, polyester/cotton blended fiber were higher degree of washing efficiency than cotton fiber.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.3_4
• /
• pp.422-432
• /
• 2004

This study investigated underwear consumption behavior of women, who were 20∼59 years old and resided in Incheon during 2002 summer. 372 women completed questionnaires, and data were analyzed using factor analyses, t-test, ANOVA, $\chi$$^2$-analyses. They usually purchased underwear considering comfort and economic factor at a discount store. They wore sleeveless T-shirts, but they didn't wear underpants except panties highly all the year round. Higher rate of them wore pantyhose instead of underpants during autumn, winter and spring. They demanded unstitching of stitches and lengthened sleeves in most of the groups. And older and lowly educated women group wanted widen armhole of upper underwear, and tighten waistband of panties. They generally washed in washing machine using cold water. Besides they added oxygen bleach and softner during wash and final rinse. Older than 20's boil their underwear frequently. The women in a group of boiling commonly answered the looseness of waistband. It is recommended not to boil but to soak with bleach added warm water for improving the whiteness and durability of underwear. For a treatment with higher temperature deprives the elasticity of spandex.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.3_4
• /
• pp.444-451
• /
• 2004

This study was carried out to investigate the chemical and dyeing properties of Petasites japonicus leaf extract under the various extracting and dyeing conditions such as temperature, time, the ratio of water and pH, repetition of dyeing in silk and cotton fabrics with Petasites japonicus leaf. The results were as follows: 1. It was found that λ$_{\max}$ of color solution extracted by Petasites japonicus leaf has two peaks at 290nm and 323nm. 2. The optimum extracting conditions were studied at 10$0^{\circ}C$, 40min., pH 7 and 1 : 20(the ratio of water and Petasites japonicus leaf), the optimum dyeing temperature, dyeing time, dyeing pH and repetition of dyeing were 10$0^{\circ}C$, 60min., pH 7, repetitions of three times, respectively. 3. Silk and cotton fabrics dyed with Petasites japonicus leaf extract were colored yellowish orange. The colory Petasites japonicus leaf extract in silk and cotton fabrics were deeped by same-mordanting with aluminum potassium sufate and cupric sulfate. 4. Washing fastness of silk fabrics was 4∼5 grade, but cotton fabrics was 3∼4 grade, so washing fastness of silk fabrics washed with neutral detergent was excellent.

• Fashion & Textile Research Journal
• /
• v.14 no.1
• /
• pp.122-129
• /
• 2012

To develop a waterproof breathable material, we fabricated three kinds of nanofiber web laminates using a massproduced electrospun nanofiber web with different substrates and layer structures. The waterproofness and breathability of nanofiber web laminates were evaluated after repeated launderings and compared with those of conventional waterproof breathable fabrics currently in use, including densely woven fabric, microporous membrane laminated fabric, and coated fabric. The durability of nanofiber web laminates, including adhesion strength, abrasion resistance, tensile strength, and tearing strength, was also assessed and compared with those of conventional waterproof breathable fabrics. The water vapor transmission of nanofiber web laminates increased slightly after repeated launderings, whereas the air permeability somewhat decreased after launderings but still maintained an acceptable level of air permeability. Laundering reduced the resistance to water penetration of nanofiber web laminates, which implies that laminating techniques or substrate materials that could support waterproofness of the laminated structure should be explored. The adhesion strength, abrasion resistance, tensile strength, and tearing strength of nanofiber web laminates were in a range comparable to conventional waterproof breathable materials.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.9 no.3
• /
• pp.35-44
• /
• 1985

This research explored the effects of abrasion, laundering, and abrasion/laundering interaction upon wear of 15 durable nonwoven fabrics. Wear was measured in terms of changes in tensile strength and stiffness. The test materials consisted of nine different dry-laid commercial interfacing fabrics of various fiber contents and six spunbonded poyester and polypropylene fabrics. Three fixed levels of abrasion and four fixed levels of laundering made up the 3$\times$4 factorial analysis used for the experiment and the analysis of variance. Findings revealed that abrasion had a greater effect than laundering on strength and stiffness of the tested fabrics. Laundering seemed related to the particular fibers used and to the fixation quality of fiber bonds. Spunbonded webs performed better than dry-laid webs in retaining tensile strength Stiffness change occurred more readily than strength change. Lighter, flexible, stretchable fabrics seemed less easily abraded than heavier, stiff, less stretchable fabrics. The interfacing fabrics of 70/20/$10\%$ nylon/polyester/rayon blends with high crosswise stretchability effectively resisted wear caused by abrasion and laundering. Further research is recommended to study the effects of longer abrasion periods and additional laundering cycles o,1 wear qualities of nonwoven fabrics. Additional factors such as amount and fixation methods of bonding agents, the effect of shear distortion, seam construction, and drycleaning solvents could also be studied.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.5
• /
• pp.893-904
• /
• 1996

The main purpose of this research was to examine the purchase and use behavior of consumers related to washing machines in order to develope strategies to increase competitiveness of washing machines manufactured in Korea. Purchase and use behavior related to washing machines were examined by survey method and detailed information on washing conditions and usage of washing machines were obtained by diary method. 398 questionnaires were analyzed in the survey and 35 housewives participated in keeping the records of their washings for 30 days. The results of the survey showed that price and a tangle of clothes were the most determinant factors for purchase of washing machines and the knowledge related to washing was relatively low The diary method revealed that washing loads and frequencies of washing increase with the household size, and functions of washing machines except water level are infrequently used. Comparisons between the survey and diary results indicated that consistency between the two methods depends on the types of questions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.7
• /
• pp.1196-1204
• /
• 1997

Cotton, rayon/cotton, and Tencel twill weave fabrics were used to investigate the effect of fiber types on the cellulase washing finish. And twill. basket, and derivative weave cotton fabrics were used to study the weave effect. Various fabrics were treated with neutral cellulase varying treatment times and with acid cellulase, stone, and stone-neutral cellulase respectively for two hours in a rotary washer. Weight loss decreased in the order of rayon/cotton> cotton> Tencel, and basket and derivative weave fabrics lost more weight than twill weave fabric. Color difference decreased in the order of cotton> Tencel> rayon/cotton, and twill weave fabric had larger color difference than derivative and basket weave fabrics. Back staining decreased in the order of cotton> rayon/cotton> Tencel, and twill weave fabric had larger back staining than derivative and basket weave fabrics. Tear strength retention decreased in the order of rayon/cotton> cotton> Tencet and twill weave fabric had larger tear strength retention than derivative and basket weave fabrics. Flex stiffness retention decreased in the order of cotton> Tencel> rayon/cotton, and in the order of derivative> twill> basket weave. In cotton fibers, damage of primary wall was observed. And the cellulase treatment on Tencel seemed to roughen the fabric surface slightly, and to fibril fibers along the fiber axis.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.6
• /
• pp.1050-1059
• /
• 2017

Drying processes often cause knitted fabrics to shrink. This study obtains proper drying conditions for in the dryer use that can minimize knitted fabric shrinkage by investigating changes in shrinkage according to drying conditions. The experiment samples were all machine washable plain, mesh, and lacoste knitted fabrics made of 100% cotton. Samples were first washed in a washing machine on a normal cycle. They were then layered on a flat surface in an artificial climate chamber and dried for 24 hours at $20^{\circ}C$ and $40^{\circ}C$, respectively. Shrinkage was measured for 180 minutes at 30 minute intervals after washing. The comparison results of the shrinkage in the washing and drying process indicate that 80.0% and 23.0% shrinkage of plain knitted and lacoste knitted fabrics occurred during the washing process. As the samples dried, the shrinkage of the plain and lacoste knitted fabrics then rapidly increased after approximately 30.0% moisture content. The highest air drying shrinkage occurred over one cycle with insignificant changes in shrinkage after repeated treatments.