• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.4
• /
• pp.305-311
• /
• 2003

DOP aerosol particles with geometric mean diameter of 0.5-3.0 ${\mu}{\textrm}{m}$, geometric standard deviation of 1.1-1.3 and total number concentration of 1,500-8,000 Particles/㎤ were used to determine collection efficiencies of a packed wet scrubber with respect to particle size. The tested operating variables included air velocity and water injection rate. It was shown from the experimental results that the collection efficiencies increased with increasing water injection rate and decreasing air velocity. Meanwhile, as for the particle size variation, all of the collection efficiency curves increased rapidly between 0.57-1.41${\mu}{\textrm}{m}$ for the range of water injection rate above 30 L/min. It was also seen that the collection efficiency of a packed wet scrubber is mainly governed by the mechanism of inertial impaction.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2004.05a
• /
• pp.163-164
• /
• 2004

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1795-1800
• /
• 2004

DOS and NaCl aerosol particles with geometric mean diameter of $0.1{\sim}3.0{\mu}m$ geometric standard deviation of $1.1{\sim}1.8$ and total number concentration of $450{\sim}400$ $particles/cm^3$ were used to determine collection efficiencies of a duct-type wet scrubber with respect to particle size. The tested operating variables included air velocity and water injection rate. It was shown from the experimental results that the collection efficiencies increased with increasing water injection rate and decreasing air velocity. It was also seen that the collection efficiency of the Duct-type wet scrubber is mainly governed by the mechanism of inertial impaction.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2009.10a
• /
• pp.130-132
• /
• 2009

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.58-58
• /
• 2004

• Environmental engineer
• /
• s.121
• /
• pp.46-49
• /
• 1996

반건식 세정기는 기존습식처리 설비의 단점인 폐수 및 백연의 발생, 설비의 내구성 저하 등을 보완한 유해가스 처리설비로 탁월한 가스 및 중금속 제거효율, 백연 및 폐수의 발생이 전무하며, 반응생성물의 분리제거로 후단집진설비의 부하를 최대한 줄 일 수 있는 21세기 첨단 유해가스 제거기술의 결정체이다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.9
• /
• pp.745-752
• /
• 2006

DOS and NaCl aerosol particles were used to determine collection efficiencies of a 2-stage electrostatic wet scrubber with respect to particle size. The DOS and NaCl aerosols have geometric mean diameters of 0.1-3.0 urn, geometric standard deviations of $1.1{\sim}1.8$ and total number concentrations of $450{\sim}2,400\;particles/cm^3$. The tested operating variables for the electrostatic wet scrubber included air velocity and water injection rate. It was shown from the experimental results that particle collection efficiencies increased in the submicron particle size range when different polarities were applied on the water nozzle and corona wire, respectively. This increase in the collection efficiency is attributed to strong electrostatic attraction between the negative water droplets and positive submicron particles. The collection efficiencies also increased when water injection rate was increased or air velocity was decreased. Meanwhile, the pressure drop across the wet scrubber decreased by 90% compared with the existing mechanical wet scrubber. Finally, ammonia gas was used to determine gas removal efficiencies. It was observed that the gas removal efficiencies increased when the air velocity was decreased or the water injection rate was increased.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.213-214
• /
• 2000

입자상 물질을 제거하기 위한 수단으로는 싸이클론, 필터, 전기집진기, 세정탑 등이 있다. 이중에 세정탑은 설치 및 운전이 편리한 반면, 미세 입자 제거 효율이 낮아 산업체에서 제한적으로 사용되고 있다. 이러한 결점, 즉 미세 입자의 제거 효율을 높이기 위해 다양한 형태의 세정탑이 연구되었으나(Laitinen et al., 1997; Fan et al., 1988), 대부분 실험적인 연구로서 세정탑에서 입자의 제거 기작이나 크기 분포 특성을 설명하지는 못한다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.10a
• /
• pp.211-212
• /
• 2008

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.397-398
• /
• 2003

대기 중 분진을 제거하는 방식으로 여과 이론을 적용할 수 있는 경우는 섬유 여과기, 입자상 여과기, 액적에 의한 습식 세정기 그리고 기포를 이용한 분진 제거 방법 등을 들 수 있다. 이러한 여과 원리를 이용한 집진 설비를 설계하는데 있어, 액적 또는 기포 주위의 유동장을 정확히 파악하는 것은 매우 중요하다. 특히, 포집구의 크기가 작아지고 화학적으로 반응성을 갖는 고온의 함진가스가 유입되는 경우 및 저압에서 운영되는 경우에 누드센수(Knudsen number)의 영향을 무시할 수 없는데 이러한 영역을 저 누드센 영역(low Kundsen number regime)이라고 한다(Lee et al., 1978). (중략)