• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.1
• /
• pp.70-73
• /
• 2013

Solubility of oil contaminants in surfactant solutions plays an important role in selecting a suitable surfactant type for soil remediation. Solubility measurement procedures consist of making an equilibrium between surfactant solution and oil, solvent extraction using dichloromethane, and condensation for gas chromatography analysis. Solubility measurement requires time consumption and lots of materials. Interfacial tension is the contracting force between two immiscible liquids, surfactant solution and oil, and also closely related to solubility of oil. This study established a relationship between the interfacial tension and solubility of diesel fuel in surfactant solution and suggested a quick method to estimate solubility of oil in a surfactant solution by measuring its interfacial tension. The results of this study showed that the solubility of diesel fuel in surfactant solution was exponentially increased by decreasing the interfacial tension between two immiscible liquids. The solubility of diesel fuel was significantly increased under the interfacial tension conditions below 1 dyne/cm, while the solubility change was not apparent under the interfacial tension conditions beyond 5 dyne/cm. Interfacial tension measurements may allow us to quickly select an efficient surfactant and its concentration for soil remediation.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.715-719
• /
• 2009

The phase change electrode board for the bio-information detection through electrical property response of phase change material was developed in this study. We manufactured the electrode board using Aluminum first that is widely used in conventional semiconductor device process. Without further treatment, these aluminum electrodes tend to contain voids in PETEOS(plasma enhanced tetraethyoxysilane) material that are easily detected by cross-sectional SEM(Scanning Electron Microscope). The voids can be easily attacked and transformed into holes in between PETEOS and electrodes after etch back and washing process. In order to resolve this issue of Al electrode board, we developed a electrode board manufacturing method using low resistivity TiN, which has advantages in terms of the step-coverage of phase change($Ge_2Sb_2Te_5$, GST) thin film as well as thermodynamic stability, without etch back and washing process. This TiN material serves as the top and bottom electrode in PRAM(Phase-change Random Access Memory). The good connection between the TiN electrode and GST thin film was confirmed by observing the cross-section of TiN electrode board using SEM. The resistances of amorphous and crystalline GST thin film on TiN electrodes were also measured, and 1000 times difference between the amorphous and crystalline resistance of GST thin film was obtained, which is well enough for the signal detection.

• Korean Business Review
• /
• v.16
• /
• pp.23-42
• /
• 2003

Most of the taxes in Korea are collected using a voluntary reporting payment system that meets most financial requirements. However, many people are unaware of their tax liability, and legal forces to ensure payment of taxes are weak within the Korean social structure. Therefore, the tax system cannot depend only on people's awareness of their tax liability, and for these reasons the Korean government has been investigating a system for fair taxation and the administrative punishment for tax evasion. In addition, an improvement to the taxation system is strongly 'demanded in order to protect taxpayers' rights, and improve the efficiency and rationality of the system. In this study, I compare and analyze the problems related to each nation's tax investigation system, and then propose an improved plan for a tax investigation system in Korea. It is necessary to prescribe in the bylaws of the Office of National Taxation that the investigator's performance rating or incentives are not affected in any way by the tax investigator's actual records on tax collection, as this type of evaluation can easily lead to conflicts with the primary goals of the law or written constitution.

• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.87-101
• /
• 1999

This study has been carried out to examine the feasibility of washing technique for reducing the heavy metal contamination level of tailing wastes and agricultural soil surrounding abandoned metal mines. Some organic acids with low molecular weight were used as washing solution. Initial contamination levels of copper and lead for some soil samples were found to exceed the standard levels of countermeasure and concern, and those of cadmium to approach the standard level of countermeasure. Experimental results using sequential extraction method revealed that more than half of copper and lead existing in tailing wastes are adsorbed forms available for plants. There are some proportional relationships between metal concentrations determined by using 0.1N HCI solution and those determined by sequential extractions. Citric acid was turned out to be superior to oxalic acid and acetic acid with low molecular weight in washing above three metals. When citric acid is used for washing heavy metals from soil, it is desirable to operate at pH less than 5.5 for better washing effect. Metal removal effect by citric acid solution has been proved to depend upon solution concentration and the mass ratio of solution to soil. Addition of SDS(Sodium Dodecyl Sulfate) to citric acid improved the washing effect of cadmium among three metal most significantly. while copper removal did not change. Washing technique using citric acid for removal of heavy metals from agricultural soil or tailing wastes is recognized to be an effective remediation method.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.291-298
• /
• 2016

Electrochemical water treatment process as a useful treatment method for the removal of non-degradable matter has been consistently studied for several decades. Key process of electrochemical water treatment are oxidation reaction from an anode and reduction from a cathode. In this study, the effect of pre-treatment methods in the insoluble electrode manufacturing process for the water treatment has been evaluated for the life time of electrode The results of this study showed that pre-treatment methods of a base metal such as surface roughness, clean method and interlayer formation influenced to life time of electrode when the same condition (catalyst electrode layer coating method and material system) was applied for pre-treatment methods. This study was conducted by using $IrO_2/Ti$ electrode In the test of sand-blasting process, an electrode manufactured by using sanding media of different sizes resulted in the most effective electrode life time when the size of alumina was used for $212{\sim}180{\mu}m$ praticle size (#80). The most effective method was considered using arc plasma in the additional roughness control and cleaning process, sputtering method to form Ta type interlayer formation process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.264-274
• /
• 2019

This study attempted to analyze the effects of cleansing oil on skin by preferred vegetable base oil. For this, a questionnaire survey was performed against 100 people, and their face washing habit and preferred vegetable base oils were examined. Based on the results, 4 different cleansing oils were prepared and experimented. The experiment was conducted against 10 adult women in their 20-30s, and moisture level, sebum level and trans-epidermal water loss (TEWL) before and after the experiment were measured. After the test, satisfaction was measured, and the results found the followings: When asked what cleansing oil is most preferred by vegetable base oil type, 'rose hip oil' was the highest, followed by 'olive oil', 'apricot kernel oil' and 'camellia oil'. According to the clinical trials, both moisture and sebum levels increased before and after cleansing in all four cleansing oil types by the preferred vegetable base oil (p<0.001, p<0.001). In addition, TEWL decreased with a difference by base oil (p<0.01). According to a subjective satisfaction survey which was performed after the experiment, rose hip oil-contained cleansing oil (RHC) was the highest in terms of cleansing effect and satisfaction level. Consequently, it was confirmed that the cleansing oil by vegetable base oil improved skin conditions by protecting a skin barrier with a positive effect on the improvement of sebum and moisture levels and TEWL. Even though a preferred oil type and a satisfaction level may differ by preferred oil and feeling after use, cleansing oil by vegetable base can be helpful as a skin care product which eases skin dryness and protects a skin barrier.

• Resources Recycling
• /
• v.31 no.6
• /
• pp.60-65
• /
• 2022

This study presents the carburization process for recycling sludge, which was formed during silicon wafer machining. The sludge used in the carburization process is a mixture of silicon and silicon carbide (SiC) with iron as an impurity, which originates from the machine. Additionally, the sludge contains cutting oil, a fluid with high viscosity. Therefore, the sludge was dried before carburization to remove organic matter. The dried sludge was washed by acid cleaning to remove the iron impurity and subsequently carburized by heat treatment under vacuum to form the SiC powder. The ratio of silicon to SiC in the sludge was varied depending on the sources and thus carbon content was adjusted by the ratio. With increasing SiC content, the carbon content required for SiC formation increased. It was demonstrated that substoichiometric SiC_x (x<1) was easily formed when the carbon content was insufficient. Therefore, excess carbon is required to obtain a pure SiC phase. Moreover, size reduction by high-energy milling had a beneficial effect on the suppression of SiC_x, forming the pure SiC phase.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.103.1-103.1
• /
• 2011

실리콘 이종접합 태양전지에서 계면 결함 밀도는 효율을 결정하는데 가장 중요한 요인으로 작용한다. 계면 결함은 캐리어의 재결합 위치로 작용하여, 계면 결함 밀도가 증가하면 재결합 속도가 증가하게 된다. 흡수층으로 사용되는 실리콘 웨이퍼 (결정질 실리콘)를 가능한 깨끗하게 세정함으로써, 또한 emitter로 쓰이는 비정질 실리콘을 낮은 데미지로 증착하여 계면 결함 밀도를 감소 시킬 수 있다. 이러한 계면 결함 밀도의 감소가 어떠한 변화로 인해 태양전지 특성에 영향을 주는지 시물레이션을 통해 알아보았다. n-type 웨이퍼에 p-type 비정질 실리콘을 emitter로 하여 TCO/p/i/n-type wafer/i/n/TCO/metal의 구조를 적용했고, wafer 전면과 i로 쓰인 무첨가된 비정질 실리콘 간의 계면 결함 밀도를 변수로 적용했다. 그 결과, 계면 결함 밀도가 감소함에 따라 재결합이 감소하여 태양전지 특성이 증가하는 측면도 있지만, 흡수층의 장벽 (barrier height)이 높아져 재결합을 더욱 감소시킴으로 인해 태양전지 특성이 증가함을 알 수 있었다.

• Journal of Chest Surgery
• /
• v.34 no.2
• /
• pp.111-117
• /
• 2001

배경: 심근 수축력과 더불어 전신저항은 개심술 후 적절한 심박출량을 유지하기 위한 매우 중요한 요인이다. 후부하의 변화를 비관혈적으로 평가할 수 있는지 알아 보고자 대동맥 혈류파형의 변화를 관찰하였다. 대상 및 방법: 개흉한 8마리의 잡견에서 연속파형 Doppler 심초음파를 이용하여 nitroprusside 단독 또는 epinephrine과의 병합투여 잔후로 상행 대동맥 혈류를 측정하였다. 결과: Nitroprusside의 투여로 동맥압과 전신저항은 약물의 투여량에 비례하여 감소함으로써(p<0.05 vs 기준치), 대동맥 혈류파형의 최고속도, 평균가속 및 분거리(속도시간적분$\times$심박동수)는 증가하였고, 가속시간은 짧아졌으며(p<0.05 vs 기준치), 가속시간/박출시간의 비는 변화가 없었다. Nitroprusside 투여로 인한 전신저항의 변화는 속도시간적분이나 Doppler 시간간격 지표보다는 최고속도(r=0.60, p=0.001)와 평균가속(r=0.52, p=0.003)과 상관관계가 있었다. Epinephrine과의 병합투여로 전신저항이 증가하지 않는 한 nitroprusside 단독투여에 비해서 최고속도, 평균가속 및 속도시간적분이 더 크게 증가했으나, 전신저항이 증가되면 이 Doppler 지표들은 감소하는 경향을 보였다. 결론: Doppler 심초음파를 이용하여 상행 대동맥 혈류파형의 최고속도와 평균가속을 연속적으로 측정함으로써 후부하의 변화를 비관혈적으로 평가할 수 있으리라 생각된다.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.275-285
• /
• 2013

The purpose of this study was to investigate the differences of gender on consciousness of filial piety in undergraduates. The researched were 155 male and 176 female students in Daegu. The major findings of this study were as follows. : First, there were significant differences in the consciousness of filial piety according to student's gender. there were significant differences in the reason of filial piety according to student's gender. there were significant differences in the family values according to student's gender. Finally, the variables influencing college students' family values were gender, awareness of emotion supporting, financial supporting, physical supporting, and attachment with their parents.