• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.712-715
• /
• 2012

본 논문에서는 EM 시뮬레이터를 이용하여 LTE2300 대역의 마이크로스트립 라인 대역여파기를 설계하고 시편을 제작하였다. 중심주파수 2300MHz, 대역폭 350MHz, 삽입손실 1.5dB, 감쇄는 1930MHz와 2690MHz에서 15dB 이상, 1000MHz에서 60dB 이상으로 설계하였다. 또한 반사손실은 15dB로 설계하였다. 구현은 유전율 9.8인 알루미나 유전체에서 하였으며, 전송선로와 접지는 silver paste를 사용하였다. EM 시뮬레이션을 통해 얻은 결과값과 이를 통해 실제 제작된 시편의 보정값을 얻어 data base화 하였으며, 좋은 재현성을 얻을 수 있음을 확인하였다. 특히 일반적으로 마이크로스트립 라인 필터의 제작에 적용되는 에칭 또는 포토리소그라피 대신 레이저를 이용하여 패턴을 구현하였으며, 이 또한 우수한 특성과 재현성을 보여주었다.

• Electronics and Telecommunications Trends
• /
• v.7 no.2
• /
• pp.63-78
• /
• 1992

이동통신 및 위성방송등 마이크로웨이브를 이용하는 통신시스팀의 보급이 활발하게 진척됨에 따라 마이크로웨이브 대역에서 동작하는 부품의 산업적 중요성이 부각되고 있다. 여러가지 고주파통신용 부품들 중에서 유전체공진기를 이용한 RF 및 마이크로웨이브 필터와 진동자는 이들 부품의 소형화에 크게 기여하고 있다. 본 분석에서는 유전체 공진기의 소재로 이용되는 마이크로웨이브 세라믹스 및 그 응용부품의 발전과정을 간단히 살펴보았다. 또한 마이크로웨이브 유전체 소재에 대한 특성변수의 중요성을 검토하고, 세라믹 소재기술에 대하여 살펴본 다음 향후 고주파필터 부품개발과 관련한 마이크로웨이브 세라믹스 개발방향을 제시하였다.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.233-236
• /
• 2000

Bacillus thuringiensis (Bt) is the most widely used microbial insecticide in the biological control market. Cultivation of the microorganism to high cell densities offers potential for enhancing the rate of formation as well as the concentration of the desired products In the fermentation broths in bioreactor. With this objective, we developed the new bioreactor incorporating ceramic membrane module for the retention of cell mass. Cell yield and spore formation of Bacillus thuringiensis was improved markedly by adopting this new bioreactor based on glucose -limited feeding operation. It was possible to grow the cell and the heat-resistant spore to above $1.2\;{\times}\;10^{10}\;CFU/ml$ density. With glucose-limited operation, we studied the growth behavior of Bacillus thuringiensis during the cell retention culture. Linear growth of Bacillus thuringiensis was observed under glucose-limited culture, which matched well with simple mathematical model of cell retention culture.

• Journal of the Korean Ceramic Society
• /
• v.45 no.7
• /
• pp.423-429
• /
• 2008

Ceramic Fiber separator is the promising material for thermal battery system because it reduces the production cost and offers the potential to a new application compared to a pellet type electrolyte. The molten salt electrolytes for thermal battery were prepared by the impregnation of the commercial glass filters such as GF-A, C and F (Whatman, USA) with two types of molten-lithium salts, LiCl-KCl and LiK-LiBr-LiF. The wetting properties were evaluated by wetting balance test and wetting angle measurement. The wetting behaviors were strongly affected by the composition of the molten salts and the pore structure of the glass separators. The optimum wetting conditions for maximum loading and effective retention of the molten electrolyte were also studied.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.23-26
• /
• 2019

본 논문에서는 X-Ray 영상에서 용접한 부분의 기공이나 균열 등의 결함 영역을 추출하는 새로운 방법을 제안한다. 제안된 방법은 세라믹 X-Ray 영상에서 비등방성 확산 필터를 적용하여 영상의 잡음을 제거하고, 수직 및 수평 히스토그램을 각각 적용하여 용접 영역을 추출한 후, 최소 자승법을 적용하여 배경 밝기를 제거하고, 사다리꼴 형태의 Fuzzy Stretching기법을 적용하여 명암 값을 강조하여 결함 영역과 그 외의 영역간의 명암 대비를 강조한다. 그리고 Fuzzy C_Means 알고리즘을 적용하여 결함 영역을 세분화한 후, Fuzzy C_Means을 적용하여 생성된 클러스터들의 중심 명암 값을 이용하여 ${\alpha}_-cut$을 설정한 후에 임계구간을 구하고 영상을 이진화하여 최종적으로 결함 영역을 추출한다. 제안된 방법의 결함 추출 성능을 확인하기 위하여 세라믹 X-Ray 영상을 대상으로 실험한 결과, 기존의 방법보다 결함 영역이 정확히 추출되는 것을 확인할 수 있었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.899-905
• /
• 2001

This paper presents a triple-mode dielectric resonator far low loss and simple structure filter design. The BPF(Band Pass Filter) was designed using HFSS simulation results an4 fabricated using proposed resonators. The filter (3-stage BPF) has an insertion loss of about 0.9 dB at the center frequency of 1.93 GHz and a 3 dB bandwidth of about 25 MHz. If more complex characteristic is required, slot coupling between resonators can be used. Especially, the proposed BPF can be applied to the next generation mobile communication IMT-2000 system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.931-935
• /
• 2003

A multilayer two-stage LC bandpass filter using low-temperature cofired-ceramic(LTCC) is proposed in this paper. The proposed bandpass filter is composed of two ceramic substrates with different dielectric constant instead of single ceramic material from top to bottom layer. Inductive elements are designed in a low permitivity ceramic layer to reduce parasitic effects and loss, while capacitive elements are designed in a high permitivity ceramic layer for size reduction. The proposed filter has 950 MHz center &equency, 118 MHz tractional bandwidth, and 3.5 dB insertion loss. And, the total size of this filter is 2.5${\times}$2.5${\times}$l.4mm$^3$. The performance of filter is analyzed by changing coupling capacitance between each resonator.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.3
• /
• pp.1-9
• /
• 2003

In this paper, we designed a highly suppressed sidelobe ladder type RF SAW bandpass filter based on 1-port resonator, for 800 MHz mobile communication system. In order to get the highest device characteristics, we optimized some important parameters such as the electrode thickness, electrode lambda weghting of the reflectors, and static capacitance ratio. Furthermore, we fabricated the Tx and Rx. filter using optimized parameters. Implemented filters can be used in 800 MHz mobile communication system and external impedance matching circuits are not needed. RF filter was fabricated on 36$^{\circ}$LiTaO$_3$ substrates with Al-Cu (W 3 %)and mounted 3.8mm$\times$3.8mm$\times$1.5mm SMD package. Developed filters has 2.3 dB insertion loss in the 25 MHz pass-band, 33MHz with 3-dB insertion loss, stop-band rejection of 30 dB, passband ripple is less than 0.5 The power durability of the filters measured about 3.5W and the maximum temperature variation within -2$0^{\circ}C$~8$0^{\circ}C$ was 0.09 dB/$^{\circ}C$ of 3-dB insertion loss.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.214-217
• /
• 2004

In this paper, a Ka-band LTCC (low temperature co-fired ceramic) narrow bandpass filter (BPF) is firstly presented. This BPF shows very narrow 3dB fractional bandwidth of 4.5 ％ centered at 28.7㎓. The advantages of multi-layered LTCC technology such as high integration and vertical stacking capabilities were employed to design three-dimensional interdigital end-coupled embedded microstrip narrow BPF. The difficulties in controlling the precise distance between two adjacent resonators in LTCC end-coupled BPF were overcome by locating the resonators on different layers. The measured insertion loss is 3dB at 28.7㎓, pass band is from 27.9 ㎓ to 29.2 ㎓, and the return loss in the pass band is less than 10 dB.

• Resources Recycling
• /
• v.19 no.5
• /
• pp.31-43
• /
• 2010

To fabricate porous SiC candle filter for filtration facility of the IGCC system, the candle type filter preforms were fabricated by ramming and vacuum extrusion process. A commercially available ${\alpha}$-SiC powders with various particle size were used as starting raw materials, and $44\;{\mu}m$ mullite, $CaCO_3$ powder were used as non-clay based inorganic sintering additive. The candle typed preforms by ramming process and vacuum extrusion were sintered at $1400^{\circ}C$ for 2h in air atmosphere. The effect of forming method and particle size of filter matrix on porosity, density, strength (flexural and compressive strength) and microstructure of the sintered porous SiC candle tilters were investigated. The sintered porous SiC filters which were fabricated by ramming process have more higher density and strength than extruded filter in same particle size of the matrix, and its maximum density and 3-point bending strength were $2.00\;g/cm^3$ and 45 MPa, respectively. Also, corrosion test of the sintered candle filter specimens by different forming method was performed at $600^{\circ}C$ for 2400h using IGCC syngas atmosphere for estimation of long-term reliability of the candle filter matrix.