• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.898-901
• /
• 2000

It is known that Si3N4 ceramic insert has less hardness than Al2O3 ceramic insert. But Si3N4 ceramic insert has not only high toughness and strength but also low thermal expansion coefficient, which makes it has longer tool life under thermal stress condition. In this study, commercial Si3N4 ceramic insert and home-made SiC-Si3N4 ceramic insert which has different sintering time and chemical composition is tested under various cutting conditions. The experimental result is compared in terms of tool life and cutting force. Generally, As the cutting speed and the feed rate increased, the cutting force and the flank wear increased too. The performance of SiC-Si3N4 ceramic insert shows the possibility to be a new ceramic tool.

• 한국정밀공학회지
• /
• 제27권5호
• /
• pp.14-21
• /
• 2010

In this study, presintered low purity alumina ceramics were machined with various tools to clarify the effects of the tool material, cutting condition and tool geometry on machinability. The main conclusions obtained were as follows. (a)The wear of tungsten carbide tool becomes smaller with the increase of the feed and clearance angle, and with the decrease of rake angle, especially exhibiting considerably smaller wear with both the decrease of rake angle and the increase of clearance angle. (b) So far as turning the ceramic presintered at low temperature, the diamond tool shows the best performance with higher feed. (c) The effect on the tool wear of the feed, clearance angle and rake angle becomes smaller in turning the ceramic presintered at higher temperature. (d) The tool wear is not severely affected by the depth of cut.

• 한국공작기계학회논문집
• /
• 제10권6호
• /
• pp.78-84
• /
• 2001

In the present study, SiCSi-$Si_3 N_4$-SiC ceramic composites that contained up to 30 wt% of dispersed SiC particles were fabricat-ed cia hot-pressing with an oxynitride glass. The microstructure, the mechanical properties and the cutting performance of resulting ceramic composites were investigated. By fixing the composition as $Si_3 N_4$-20wf%SiC, the effect of sintering time on the microstructure, the mechanical properties and the cutting performance were also investigated. The longer sir-tering time is, the bigger the grain size of SiC is. The fracture toughness(-$K_k$) of the $Si_3 N_4$-SiC ceramic composites increased with the increase of gain size, while the flexural strengthh($\sigma$) decreased. For machining SCM440, the insert with 20wt%r SiC sintered for 8 hours showed the longest tool life while the insert with 20wt% SiC sintered for 12 hours showed the longest tool life for machining gray cast iron.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 추계학술대회 논문집
• /
• pp.145-150
• /
• 1992

화인세라믹의 우수한 공학적 특성으로 인한 최근의 이용가치 증대와 더불어 세라믹의 고정도 가공에 대한 관심이 높아지고 있다. 다이아몬드휠을 이용한 연삭이나 다이아몬드 공구를 이용한 선삭에 의해 세라믹의 고정도 표면생성을 실현시키고자 하는 연구가 활발히 진행되고는 있으나 아직 미흡한 상태에 있다. 따라서 전통적으로 고정도 표면생성에 널리 용되어 온 래핑에 의한 표면다듬질이 현재 행하여지고 있는 일반적인 방법이다. 본 연구에서는 화인세라믹의 고정도 표면생성을 위한 원통래핑 공정의 최적화 방법으로 실험계획법의 한 응용분야인 반응표면분석법을 이용하였으며 그 결과, 적은 재료와 시간으로 능률적이고 체계적인 실험 및 통계적인 분석을 통해서 원통세라믹의 고정도 표면생성을 위한 최적래핑조건을 찾아내었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.59-65
• /
• 2003

Four kinds of $Si_3N_4$-based ceramic cutting tools with different sintering time were fabricated to investigante the effect of sintering time on the microstructure, mechanical properties, grain sizes and the cutting performance. An endeavor was also made to determine the relation among mechanical property, Brain size and tool life. $Si_3N_4$ home made cutting tool sintered for 1 hour under $1760^{\circ}$ temperature and 25MPa pressure showed the best cutting performance among selected ceramic tools during machining both Bray cast iron and heat treated SCM440. Multiple linear regression model was used to estimate the tool lift from mechanical property, grain size and showed good result. It was also shown that hardness imposed the biggest offect on tool life.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.211-211
• /
• 2009

높은 이온화율과 복잡한 형상의 모재에도 표면 도포성 및 균일성을 나타내는 아크이온플래이팅 기술과 비전도성 세라믹 타겟물질에 적용가능한 스퍼터링 기술이 결합된 하이브리드 코팅 시스템(Hybrid coating system)을 이용하였다. 그리고 Cr-Al-N과 Cr-Si-N 코팅막의 강화 기구를 복합시킨 새로운 개념의 Cr-Al-Si-N 코팅막을 초경(WC-Co)시험편에 증착하여 Si 첨가량에 따른 미세구조의 미세경도 특성을 파악하였다. 공구성능 평가는 고속가공조건하에 마이크로 밀링기에서 무코팅(초경공구), Cr-Al-Si-N (Si : 0, 4.5, 8.7, 16 at.%) 코팅 마이크로엔드밀에 대하여 공구마멸에 대한 공구수명을 비교, 평가하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.150-155
• /
• 1994

종래의 초내열합금은 원자력산업과 우주항공산업등에 주로 사용되었으며, 산업이 고도화되어짐에 따라 각종 산업기계와 자동차 분야에까지 광범위하게 사용되어지고 있다. 대표적인 초내열합금으로서의 인코넬(Inconel)은 인성과 Creep 특성이 우수하고, 특히 고온강도가 높고 화학적으로도 안정하여 부식에도 강한 장점을 지니고 있어 항공기 부품재료로서 최근 각광을 받고 있다. 본 연구에서는 일반적으로 사용되어지고 공구재종인 코팅초경합금공구와 세라믹 공구를 사용하여 초내열합금인 인코넬 600을 절삭가공하여, 절삭저항,공구의 파손 및 마모,칩의 용착현상등의 가공성에 영향을 주는 요인에 대하여 검토함으로써, 공구의 종류에 대ㄷ응하는 적절한 절삭영역을 설정하는 것을 목적으로 하였다.

• 한국생산제조학회지
• /
• 제12권3호
• /
• pp.40-46
• /
• 2003

• 한국정밀공학회지
• /
• 제14권4호
• /
• pp.30-37
• /
• 1997

This thesis is concerned with the study on the characteristics of the tool failure occuring at the beginning of cutting in finish machining of hardened steels such as carbon tool steel and alloy tool steel by a ceramic tool (Al$_{2}$O$_{3}$+TiC) with nose radius. In the machining of hardened carbon steel STC3, the wear mechanism on the flank face of the ceramic tool is abrasion wear. The mode of tool failure is developed into catastropic fracture with flaking. It is thought that the fracture caused by FeO and TiO$_{2}$ results from the oxidation of Fe in the workpice and TiC in the ceramic tool and the deposit of Fe formed on the surface of the ceramic tool. In the machining of hardened alloy steel STD11, the wear mechanism on the flank face of the ceramic tool is that abrasion and adhesion wear exist simultaneously. The mode of tool failure at the beginning of cutting features is DOC notch wear. It is thought that the DOC notch wear caused by FeO and TiO$_{2}$results from the oxidation of Fe and TiC in the workpiece and ceramic tool, respectively.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.1944-1949
• /
• 2001

Four SiC-Si$_3$N$_4$ceramic cutting tools with different composition have been fabricated by hot-pressing. Correlations among the annealing time, the corresponding microstructure and the mechanical properties of resulting ceramics have been investigated. The fracture toughness and the grain size of both SiC and Si$_3$N$_4$in SiC-Si$_3$N$_4$composites increased with the annealing time. 1\`he hardness of SiC-Si$_3$N$_4$composites was relatively independent of the grain size and the sintered density. These ceramic cutting tools were tested under various cutting conditions and compared with the commercial Si$_3$N$_4$ceramic cutting tools. The experimental results were compared in terms of tool life and cutting force. The performance of SiC-Si$_3$N$_4$ceramic cutting tool shows the possibility to be a new ceramic tool.