• Analytical Science and Technology
• /
• v.22 no.4
• /
• pp.307-312
• /
• 2009

A spectrofluorimetric methods has been developed for the determination of carbaryl in an aqueous solution. The effects of excitation wavelength, concentration of surfactant, concentration of ethanol as cosurfactant and emission wavelength on the fluorescence intensity were investigated to find the optimum experimental conditions to determine carbaryl. The emission intensity of the carbayl was increased with addition of sodium dodecyl sulfate (SDS) as a surfactant. The emission intensity of the carbaryl was further increased with addition of ethanol as a co-surfactant. The optimum conditions were 281 nm for excitation wavelength, $1.0{\times}10^{-2}mol/L$ SDS, 20% (v/v) ethanol and 349 nm for emission wavelength. Under the optimum conditions, the emission intensity increased with the carbaryl concentration in the range of $5{\times}10^{-7}$ to $1.0{\times}10^{-4}mol/L$ with a detection limit ($3{\sigma}$) of $1.1{\times}10^{-8}mol/L$. The resulting correlation coefficient of the working curve was 0.9996.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.2
• /
• pp.173-179
• /
• 1990

This paper described to be measured the damping Characteristics in the artificial magnetic field in order to estimate the stabilited of the card and characteristic of movement of the directional system of the magnetic compasses made in Korea. The results obtained are summarized as follows. 1) It is compared by the elements of performance of the magnetic compasses made in Korea with the standards for magnetic compass of the IMO NAV/ANNEX II. The results are suitabled in the korean off shore, but it is unsuitabled in the high latitude sea than over the latitude 60 degree. 2) The characteristic of damping curve by the diameter of cards when the diameter of cards are 170mm and 175mm(clearance are 10.0m, 12.5mm), the fricative error is indicated the least than the other ones.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.339-345
• /
• 2014

For enhancing productivity of glulam, high frequency (HF) curing technique was researched in this study. Heat energy is generated by electromagnetic energy dissipation when HF wave is applied to a dielectric material. Because both lamina and adhesives have dielectric property, internal heat generation would be occurred when HF wave is applied to glulam. Most room temperature setting adhesives such as phenol-resorcinol-formaldehyde (PRF) resin, which is popularly used for manufacturing glulam, can be cured more quickly as temperature of adhesives increases. In this study, dielectric properties of larch wood and PRF adhesives were experimentally evaluated, and the mechanism of HF heating, which induced the fast curing of glue layer in glulam, was theoretically analyzed. Result of our experiments showed relative loss factor of PRF resin, which leads temperature increase, was higher than that of larch wood. Also, it showed density and specific heat of PRF, which are resistance factors of temperature increase, were higher than those of wood. It was expected that the heat generation in PRF resin by HF heating would occur greater than in larch wood, because the ratio of relative loss factor to density and specific heat of PRF resin was greater than that of larch wood. Through theoretical approach with the experimental results, the relative strengths of ISM band HF electric fields to achieve a target heating rate were estimated.

• New Physics: Sae Mulli
• /
• v.68 no.11
• /
• pp.1167-1172
• /
• 2018

Carbon nanotubes (CNTs) are structures of carbon atoms bonded together in hexagonal honeycomb shapes, with multi-walled CNTs having a very high thermal conductivity of $3000W/m{\cdot}K$ and single-walled CNTs having a conductivity of $6000W/m{\cdot}K$. In this work, the transmittance and the thermal diffusivity of a multi-walled carbon nanotube dispersion with a concentration of 1.5 M were measured using a single beam method, a dual beam method, and the thermal lens effect. The nonlinear optical coefficients were obtained by using the z-scan method, which moved the sample in the direction of propagation of the single laser beam, propagation and the thermal diffusivity was measured using a double laser beam. As a pump beam, a diode-pumped solid state (DPSS) laser with a wavelength of 532 nm and an intensity of 100 mW was used. As the probe beam, a He-Ne laser having a wavelength of 633 nm and an intensity of 5 mW was used. The experimental result shows that when the concentrations of the sample were 9.99, 11.10, 16.65, and 19.98 mM, the nonlinear absorption coefficients were 0.046, 0.051, 0.136 and 0.169 m/W, respectively. Also, the nonlinear refractive indices were 0.20, 0.51, 1.25 and $1.32{\times}10^{-11}m^2/W$, respectively, and the average thermal diffusivity was $1.33{\times}10^{-6}m^2/s$.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.3
• /
• pp.130-138
• /
• 2000

The friction factor equation of open channel flow is developed by using Prandtl's mixing length theory and considering the flow characteristics of smooth or rough turbulent flow. BYO model considers vertical velocity profile for the (:omputation of bottom friction of surface waves and current flow. The model computes the mean bottom friction of combined wave-current flow by the vectorial summation of wave velocity and current velocity at Bijker point. The near bottom flow is discriminated by three flow regimes; smooth, transitional and rough turbulent flow. The model, BYO, has been further refined considering the combination of smooth turbulent flow and rough turbulent flow.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.7
• /
• pp.565-574
• /
• 2007

The flow control effect of blending Gurney flap with jet flap for flow around an NACA 0012 airfoil was numerically investigated through parameter variation of each flow control mechanism on unstructured meshes. The aerodynamic force and moment variations due to flow control were examined, and the results were compared between the blending control and each individual flow control. The results showed that the blending control required less energy input to achieve the same level of lift increment than that of the jet flap, and at the same time alleviated drag increment caused by introducing the Gurney flap.

• Environmental and Resource Economics Review
• /
• v.7 no.1
• /
• pp.165-183
• /
• 1997

생명공학은 기술의 특성상 보건 의료, 농업, 자원 환경, 에너지 등 광범위한 산업에 응용될 수 있는 고부가가치형, 두뇌기술집약형, 탈공해형, 자원 및 에너지절약형 기술이라는 특징을 지니고 있어 21세기 미래산업을 선도할 것으로 기대되고 있다. 본 연구의 목적은 생명공학기술이 1980년과 1990년 사이의 산업구조에 어떠한 변화를 초래하였는지를 알아보는 것이다. 생명공학의 산업경제적 파급효과를 분석해 보기 위해 한국은행에서 발행한 산업연관표를 이용하여 생명공학 관련산업의 지원에 따른 국내 제반산업의 생산변화율을 측정하였다. 정부의 지원이나 금리 및 세제의 혜택을 통해 생명공학 산업 관련 비용이 감소하게 되면 이에 따른 가격변화가 국내 산업발전과 고용의 증가를 갖는 것으로 믿어진다. 고정계수 아닌 변화계수를 특징으로 하는 본 모형의 접근방법은 생명공학에 대한 재정지원 및 세제 인센티브 등을 외생변수로 처리하여 산업구조 변화의 추이와 고용유발 등을 예측하였다. 본 논문의 가설은 생명공학의 영역이 점차 증대되어 나아가기 때문에 1980년의 제반산업의 영향은 1990년의 영향보다는 적어야 한다. 즉 생명공학 관련비용 하락이 전체산업에 미치는 1980년의 생산율 증가보다 1990년의 생산율 증가가 커야 할 것이다. 본 가설에 대한 검증의 과정에서 얻은 통계치를 통해 생명공학산업이 한국 산업 전체에 미치는 영향이 10년 동안에 그 차이가 거의 없어 미성숙 단계에 있다는 결론을 짓게 되었다. 따라서 생명공학 분야의 계속적인 발전을 위해서는 선진국 수준의 독자적 기술개발을 통한 국제 경쟁력을 강화해야 하는데 이를 위한 정부 및 민간기업 투자확대와 연구개발 지원체제의 확대가 요망되고 있다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.866-878
• /
• 1999

In this paper, stripline circulator including a ferrite resonator which is consisted of a circular disk and two annuli disks is designed and fabricated. Using RGF(Recursive Green Function) technique, electromagnetic field of port and input impedance is presented. The circulator characteristics are compared according to the ferrite arrangement, bias field intensity and port width. The pass-band frequency of the fabricated circulator using the designed data is from 1.55 GHz to 2.95 GHz, the reflection coefficient $S_{11}$ of input port is -30 dB, and the transmission coefficient $S_{21}$ between input port and isolation port is -28 dB at resonating point 2.38 GHz.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.256-256
• /
• 2023

집중호우는 전 세계적으로 큰 기후변화 문제 중 하나다. 극심한 집중호우의 빈도수는 지구 온난화로 인해 지난 세기 중반 이후부터 점차 증가하고 있으며 그로인한 인적 및 물적인 피해 또한 증가하고 있다. 이러한 손상을 방지하기 위해서는 적절한 설계 홍수량을 계산하는 것이 중요하다. 최근에는 미계측지역의 유출량 추정 시 분포형 강우-유출 모델을 이용한다. 분포형 모델의 가장 큰 장점은 소유역의 분할 과정을 거칠 필요 없이 유역에서 무작위 점의 유출을 시뮬레이션 할 수 있다는 것이다. 본 연구에서는 2000년 11월 니스에 발생했던 강우를 기반으로 Var 유역의 소유역이자 미계측 지역인 프랑스 니스의 Ubac Vallone의 유출량 및 유출계수를 지형 데이터 등의 물리적 인자와 분포형 강우-유출모델인 MIKE SHE를 이용하여 추정하였다. 또한, 입력되는 인자의 상대적 중요성을 파악하기 위해 민감도 분석을 수행하였다. 본 연구에서는 각 인자에 대한 상대민감도 분석을 바탕으로, 유출량에 상대적으로 큰 영향을 미치는 인자를 제안하였다. 연구 결과, 50년, 100년 및 162년 빈도별 확률강우량에 따른 유출량을 추정하였으며, 162년의경우 총 유출량은 124,384.8m³, 최대 유출량 1.512m³/s, 유출계수 0.53으로 나타났다. 총 유출량과 첨두유량에 대한 상대 민감감도 분석 결과, 수리전도도가 1.5로 첨두유량과의 민감도가 높게 나타났으며, 대수층의 수평방향 수리전도도는 0.48로 총 유출량과의 민감도가 높게 나타났다

• Progress in Medical Physics
• /
• v.7 no.1
• /
• pp.79-89
• /
• 1996

The purpose of this study was to examine the dead time effects and derive the correction factor. Using the thyroid probe and lucite cylindrical phantom, $^{99m}Tc$ 10.50mCi and $^{123}I$ 2.08mCi were counted with medical spectrometer at intervals of 2 hours for 43hrs and 79 hours. respectively. $^{123}I$ 2.06mCi was counted at intervals of 6 hours for 910 hours. To measure the starting point of dead time effect, the radioactivity was measured with dose calibrator in each time. The dead time effects started at about 0.80mCi at all distances for $^{99m}Tc$, and about 1.00mCi for $^{123}I$. The radioactivity corresponding to 20％ counts loss is 1.29(center), 1.28(2cm), 1.31(4cm), 1.13(6cm)mCi for $^{99m}Tc$ and 1.39mCi for $^{123}I$. The correction factors for 2mCi of radioactivity as an example were 1.52(center), 1.52(2cm), 1.50(4cm), 1.58(6cm) for $^{99m}Tc$ and 1.58 for $^{123}I$.