• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.20-26
• /
• 2019

Where hydraulic structures are to be installed over the entire width of a river or stream, usually a bed protection structure is to be installed. However, a local scour occurs in which the river bed downstream of the river protection system is eroded due to the influence of the upstream flow characteristics. This local scour is dominant in the flow and turbulence characteristics at the boundary of the flow direction and in the material of the bed materials, and may gradually become dangerous over time. Therefore, in this study, we compared the turbulence patterns in the local scour hole at the downstream of the river bed protection with the results of the analysis of the mobile bed experiment, and compared with the application of OpenFoam, a three dimensional numerical analysis model. The distribution of depth-averaged relative turbulence intensities along the flow direction was analyzed. In addition to this result, the stabilization of scour hole was compared with the bed shear stress and Shields parameter, and the results were compared by changing the initial turbulent flow conditions. From the results, it was confirmed that the maximum depth of generation of the three-stage was dominantly developed by the magnitude of depth-averaged relative turbulence intensity rather than the mean flow velocity. This result also suggests that design, construction or gate control are needed to control the depth-averaged relative turbulence intensities in order to reduce or prevent the local scour faults that may occur in the downstream part of the bed protection.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.6
• /
• pp.138-145
• /
• 2023

A study using numerical analysis techniques was conducted to examine the scour effect of pier-type dolphin structures installed in the domestic marine environment, and the effect of scour on horizontal bearing capacity was examined. In this study, we designed the berthing structures, taking into account the environmental and ground conditions of the target maritime area, and after calculating the predicted scour area, stability evaluation was performed by removing the ground elements of the area. The increase in scour depth was found to induce a direct decrease in horizontal bearing capacity due to soil loss in contact with the foundation, establishing a relationship that increases horizontal displacement. However, in the foundation designed to withstand the design load by reflecting the safety rate, the increase in horizontal displacement formed by possible scour is not large, which did not have a dominant effect on the horizontal bearing capacity of the foundation. In the future, research is required to analyze the impact of each factor and formalize evaluation and design techniques to evaluate the scour safety of marine foundations and pier-type structures installed in various ground conditions and structural formats.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1961-1964
• /
• 2010

국내 하천개발은 시대의 요구에 따라 이 치수 목적에서 친수성을 중시한 생태하천으로 꾸준히 진화해 왔으며, 시대적 목적에 의한 다양한 수공구조물이 하천에 설치되고 있다. 특히 최근에는 수제와 여울, 소와 같은 생태하천 복원 및 자연재해 저감을 위한 다목적 수공구조물에 대한 관심이 증대되고 있다. 그러나 이들의 연속구조물 설치에 따른 수리학적 특성 변화에 대한 연구는 미흡한 실정이다. 본 연구에서는 하도 횡단구조물의 연속 설치특성(월류비와 간격비)에 따른 흐름지배인자의 변화특성을 분석하였다. 연속 횡단구조물의 월류비와 간격비에 따른 조도계수의 변화를 계측 분석하였다. 실험 분석 결과 세굴에 영향을 주는 전단속도는 간격비(w/k)와 월류비(H/k) 및 Re수의 함수가 되는 흐름특성을 확인할 수 있었다. 또한 간격비(w/k)와 월류비(H/k), Re수와 U/U*의 관계를 제시함으로써 하도횡단 연속구조물 설계를 위한 기초 자료를 제공하고자 하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.2143-2147
• /
• 2009

최근 전 세계적 이상기후로 인한 가뭄 또는 집중호우에 따른 하천의 건천화 및 홍수범람은 국가의 인명 및 재산에 상당한 피해를 야기 시키고 있으며 이로 인한 하천환경의 급격한 변화는 생태파괴의 주된 원인이 되고 있다. 따라서 제방의 안정성을 확보하며 유로를 제어할 뿐만 아니라 퇴적 및 세굴 등에 의한 하상고의 변화를 최적화할 수 있는 기법이 요구되는 실정이다. 이와 같은 제방과 하도의 안정성 확보를 위한 구조적 대책으로 수제가 많이 알려져 있으나 국내에서는 제한적인 연구와 극히 소수의 수제설치가 시도되었을 뿐 실용화를 위한 요소기술 개발이 부족한 실정이다. 본 연구에서는 국내외의 수제 실내실험 및 설치사례조사를 통하여 각 국의 친환경적 하천관리 방안에 관한 수제설치 형태 및 기법을 검토하였다. 본 연구에서는 국내의 연구 및 설치사례조사는 물론 유럽, 미주 및 아시아의 수제 실내실험 및 설치사례조사와 수제설치에 따른 수리학적 변화양상 및 설계가이드라인에 관한 자료를 검토하였다. 사례분석을 통해 축적된 자료를 통하여 수제 설치에 따른 개선효과 및 수제의 형태·기법에 따른 수리학적 영향을 검토하였으며 향후 국내 하천별 특성에 적합한 수제형태를 검토하였다. 이상의 검토과정을 통해 수제의 지배 인자를 도출함으로써 각 인자의 영향을 정량화 할 수 있는 지속가능한 수제설계 요소기술 개발을 위한 기초자료를 제공하고자 하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6B
• /
• pp.523-529
• /
• 2011

A tidal river is a river affected by tides causing the water level to rise and fall. In the river, the velocity induced by tides at a dry season can be a more dominant factor than that at a flood season in designing hydraulic structures. In this study, flow velocities and water levels were observed in the downstream of Han River at the dry season, and they are used for verification of numerically predicted results. The behaviors of flow were also analyzed by using UNET, a commercial model managing unsteady flows. To estimate the roughness coefficients of the tidal river reach near the Shingok submerged weir, a statistical method is employed. In the method, the discrepancy ratio between the measured and calculated water levels was implemented.

• Journal of Korea Water Resources Association
• /
• v.51 no.4
• /
• pp.313-322
• /
• 2018

The height of the steps was almost the same as the grain size of bed materials and increased with channel slope. The step widths and step wavelengths are almost the same size, and the step wavelength was decreased when the channel slope was increased. It was analyzed that there was a clear correlation between channel width and step width, and the step width increases with channel width. In addition, the step wavelength was scaled by channel width, and the step height is governed by the grain size of the rock forming the step, so that the profile structure of the step-pool was changed according to the channel slope. the scale of the pool was found to be highly correlated with the channel width, grain size, and slope gradient. Therefore, the characteristics of step-pool structure in mountain streams were influenced by various factors, but it can be explained as the grain size, channel width and channel slope.