• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.1
• /
• pp.123-136
• /
• 2018

The objective of this study is to propose a new methodology to fabricate a reliable engineering-scale buffer block, which shows homogeneous and uniform distribution in buffer block density, for in-situ experiments. In this study, for the first time in Korea, floating die press and CIP (Cold Isostatic Press) are applied for the manufacture of an engineering-scale bentonite buffer. The optimized condition and field applicability are also evaluated with respect to the method of manufacturing the buffer blocks. It is found that the standard deviation of the densities obtained decreases noticeably and that the average dry density increases slightly. In addition, buffer size is reduced by about 5% at the same time. Through the test production, it is indicated that the stress release phenomenon decreases after the application of the CIP method, which leads to a reduction in crack generation on the surface of the buffer blocks over time. Therefore, it is confirmed that the production of homogeneous buffer blocks on industrial scale is possible using the method suggested in this study, and that the produced blocks also meet the design conditions for dry density of buffer blocks in the AKRS (Advanced Korea Reference Disposal System of HLW).

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.91-95
• /
• 2012

To examine the sex morph, heterodichogamy, fruiting characteristics and seed viabilities of Acer palmatum, sixty three planted trees were monitered in Wonju-si for two years in terms of their sex morph, flowering and fruiting habit. Most flowers of A. palmatum are pollinated by Apis mellifera, Helophilus virgatus, a few (3.57%) are pollinated by wind. Twenty four trees (42.9%) in 2010, and twenty trees (31.7%) in 2011 were proved protandrous (PA: pollen is shed before stigmas are receptive), thirty two (50.8%) in 2010, thirty trees (47.6%) in 2011 were proved protogynous (PG: stigmas are receptive before pollen is shed). This result means that Acer palmatum has heterodichogamous sexual system. Five trees (7.9%) have changed their sex morphs; 4 trees change the sex morp PA to PG, and one does the sex morph PG to PA. Rates of sound seeds and decayed seeds were significantly different between sex morphs. Rates of sound seeds were 51.6% (2010) and 64.0% (2011) in PA, but 30.4% (2010) and 40.4% (2011) in PG. and rates of decayed seeds did 40.0% (2010) and 31.2% (2011) in PA, but 65.6% (2010) and 56.8% (2011) in PG. The differences of decayed seeds' rates between sex morphs might be related with the timing of insect pests' outbreak.

• Journal of Bio-Environment Control
• /
• v.7 no.1
• /
• pp.71-77
• /
• 1998

The root-zone environment is an important factor to the plant growth and it is closely related to the thermal characteristics of the root media. In this study thermal characteristics of root media with ambient environmental conditions were analyzed. The temperatures of nutrient solution as well as inside air of culture bed were measured in Nutrient Film Technique(NFT) and Deep Flow Technique(DFT) systems, and also the temperatures of root media measured in aggregate culture systems , The temperature of nutrient solution of NFT system with as low as 3$\ell$/min of flow rate was 3$^{\circ}C$ higher than that with 5 $\ell$/min of flow rate in the daytime, and the temperature of inside air was 2$^{\circ}C$ higher at night. And the temperature of nutrient solution of DFT system with as low as 0.8 cm of water level was 1-2$^{\circ}C$ higher than that with 1 8 cm in the daytime, and the temperature of inside air was almost same at night. The root-zone temperatures in the perlite and rockwool granulate systems with film mulching were 3$^{\circ}C$ higher than those without film mulching in the daytime. However, the rockwool slab system with film mulching showed the same trend as rockwool granulate system, but relatively higher temperature than any other medium because of the exposure of media surface to the ambient air. Additionally the temperature below the plant was measured 3$^{\circ}C$ lower than that between plants.

• Journal of Adhesion and Interface
• /
• v.12 no.3
• /
• pp.99-104
• /
• 2011

Currently, automotive pre-primed coatings has been developed to overcome environmental regulations and to reduce manufacturing cost in automotive industry. By these reasons, an automotive pre-primed system has been investigated to remove the wash and pre-treatment process using a roll coating application. It is required to develop non-weldable pre-primed system for automotive structural adhesives, because pre-primed sheet coated with organic compounds is hard to be assembled by welding process. Primer 1 (polyester type) and primer 2 (urethane type) were designed to satisfy flexibility and formability for non-weldable pre-primed system. According to the results of physical property test of the primers, adhesion test such as single-lap shear test and T-peel test, primer 1 (polyester type) had better physical properties such as pencil hardness, solvent resistance, flexibility and adhesion with automotive adhesive than that of primer 2 (polyurethane type). In addition, the possibility of the non-weldable pre-primed system was applicable to automotive assembly process in place of welding process.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1139-1145
• /
• 2011

An automated anastomotic ring-pin system consisting of both the anastomotic ring-pin system and the coupler device has eliminated the drawbacks of the suture method. High density polyethylene (HDPE), a material with outstanding biocompatibility and injection molding capability, was used in the ring. SUS316 stainless steel, Ti-6Al-4Nb, Ti-6Al-4V, and unalloyed titanium were used in FEM simulations of the micropin. The authors categorized the microvascular anastomotic ring micropins into short neck (SN) and long neck (LN) groups in order to evaluate the effect of the micropin's fillet radius and neck length on the von Mises stress. The micropins were further divided into those with and without fillet. On the basis of the fillet radius rate (FRR), which represents the rate of change in the von Mises stress with respect to the availability and shape of the fillet, and the neck length rate (NLR), which represents the rate of change in the von Mises stress with respect to changes in the length of the neck within the fillet shape, it can be concluded that the SN-3 neck design is the most stable.

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.188-202
• /
• 2022

In the insect industry, as the scope of application of insects is expanded from pet insects and natural enemies to feed, edible and medicinal insects, the demand for quality control of insect raw materials is increasing, and interest in securing the safety of insect products is increasing. In the process of expanding the industrial scale, controlling the temperature and humidity and air quality in the insect breeding room and preventing the spread of pathogens and other pollutants are important success factors. It requires a controlled environment under the operating system. European commercial insect breeding facilities have attracted considerable investor interest, and insect companies are building large-scale production facilities, which became possible after the EU approved the use of insect protein as feedstock for fish farming in July 2017. Other fields, such as food and medicine, have also accelerated the application of cutting-edge technology. In the future, the global insect industry will purchase eggs or small larvae from suppliers and a system that focuses on the larval fattening, i.e., production raw material, until the insects mature, and a system that handles the entire production process from egg laying, harvesting, and initial pre-treatment of larvae., increasingly subdivided into large-scale production systems that cover all stages of insect larvae production and further processing steps such as milling, fat removal and protein or fat fractionation. In Korea, research and development of insect smart factory farms using artificial intelligence and ICT is accelerating, so insects can be used as carbon-free materials in secondary industries such as natural plastics or natural molding materials as well as existing feed and food. A Korean-style customized breeding system for shortening the breeding period or enhancing functionality is expected to be developed soon.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4310-4317
• /
• 2014

The HACCP (Hazard Analysis Critical Control Point) system was applied to Handmade Rice Cakes. The main ingredients of rice cakes, work facilities and workers were provided from the KB company located in Seogye-dong Yongsan-gu, Seoul between September 12, 2012 and February 13, 2013. The manufacturing process chart was prepared by referring to the manufacturing process of rice cake manufacturers in general. Microbiological hazard analysis of the raw materials and after the steaming process of rice-cakes showed a safe result. On the other hand, the microorganism test on the manufacturing environment and workers suggested that the microbiological hazard can be reduced through systematic cleaning and disinfection, accompanied by improved personal hygiene based on hygienic education for workers on the management of microorganisms in the working area.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.2
• /
• pp.76-83
• /
• 2015

This paper aims at developing an environmentally friendly modular dome structure system with highly filled extrusion wood-plastic composite (WPC) member, and manufacturing a real-size specimen by modularizing members and nodes. The member used in the model is the WPC member with 70% wooden fiber contests, which is higher then previous WPC one. Its members and nodes are modularized by analyzing geometric characteristics of icosahedral-based geodetic dome. Applicapability of the 6ea prototype nodes and 3ea prototype members to the modular dome is examined with the results of the modulaization and the making process for the real-size specimen. Besides, from the analysis results, the lowest buckling mode is expected to be a nodal buckling on a node near the boundary.

• Transactions of Materials Processing
• /
• v.14 no.5 s.77
• /
• pp.432-438
• /
• 2005

Among the most of manufacturing process, plastic deformation method offers a significant advantage in productivity and enable mass production with controlled quality and low cost. From the point of view, micro forming is a well suited technology in manufacturing very small metallic parts, in particular for mass production, as they are required in many industrial products. Meanwhile, Al 5083 superplastic alloy with very small grains has a great advantage in achieving micro deformation under low stress due to its relatively low strength at a specific high temperature range. This paper describes the micro formability of Al 5083 superplastic alloy and its application to die forging of micro patterns. Micro formability tests of Al 5083 superplastic alloy were carried out with the specially designed micro forging system by using V-grooved micro dies and pyramidal dies made of (100) silicon. With these dies, micro forging was conducted by varying the applied load, material temperature and forging time The micro formability of Al 5083 superplastic alloy was evaluated by comparing $R_f$ value, where $R_f\;=\;A_f/A_v$ ($A_v$ : cross-sectional area of the flowed metal, $A_v$ : cross sectional area of V-groove). The micro formability of 3 dimensional Patterns was also evaluated using Pyramidal type micro dies.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.1
• /
• pp.92-99
• /
• 2008

The purpose of this study was to evaluate maxillay distraction for the cleft and other patients who were treated with RED $system^{(R)}$(Martin, Tuttlingen Germany). Eleven patients with severe maxillary hypoplasia who were treated between 2002 and 2007 in the Department of Oral and Maxillofacial surgery, Pusan National University Hospital, are reviewed for this study. Their age at the time of surgery ranged from 7 to 22 years(mean age=15.36 years). Distraction was started at 5 days after Le Fort I or III osteotomy at a rate of 1mm per day for 10 to 20days. All patients used the Rigid External Distraction II system. After distraction was completed, a 2 to 3 months period of consolidation was undertaken. The follow-up period ranged from 1 to 6 years. The mean amount of advancement of the maxilla was 14.2mm(A-point). Relapse, VPI, and local infection around the halo pin were the most common complications. In adult patients, the relapse of maxilla ranged from 21% to 35%. In the growing child, postoperative stability of the maxilla was unstable and unpredictable.