• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.519-529
• /
• 2009

Fiber reinforced composite materials have various advantages in mechanical and chemical aspects. Not only high fatigue and chemical resistance, but also high specific strength and stiffness are attained, and therefore, damping characteristics are beneficial to marine piles. Since piles used for marine structures are subjected to compression and bending as well, detailed research is necessary. Current study examine the mechanical behavior under flexural and/or compressive loads using concrete filled fiber reinforced plastic composite piles, which include large size diameter. 25 pile specimens which have various size of diameters and lengths were fabricated using hand lay-up or filament winding method to see the effect of fabrication method. The inner diameters of test specimens ranged from 165 mm to 600 mm, and the lengths of test specimens ranged from 1,350 mm to 8,000 mm. The strengths of the fill-in concrete were 27 and 40 MPa. Fiber volumes used in circumferential and axial directions are varied in order to see the difference. For some tubes, spiral inner grooves were fabricated to reduce shear deformation between concrete and tube. It was observed that the piles made using filament winding method showed higher flexural stiffness than those made using hand lay-up. The flexural stiffness of piles decreases from the early loading stage, and this phenomenon does not disappear even when the inner spiral grooves were introduced. It means that the relative shear deformation between the concrete and tube wasn't able to be removed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.251-254
• /
• 2010

본 연구에서는 세계 각지의 초고층 건축물 사례 55개를 대상으로 초고층 형상의 비정형성을 대표적 유형에 따라 분류하고 해당 유형에 적용된 구조시스템을 조사함으로써 건축물의 비정형 형상과 이를 구현하기 위해 적용된 구조시스템간의 상관관계를 분석하였다. 대표적인 비정형 형상을 5개 유형으로 분류하고 구조시스템의 적용빈도를 조사한 결과, 적용 사례가 많은 Extrusions와 Tapers 형태에서는 적용된 구조시스템과의 유의미한 상관관계를 파악할 수 있었으며, 적용 사례가 많지 않은 Twisters, Tilted, Free Form 형태에서는 구조시스템의 상대적 적용 경향을 파악할 수 있었다. 본 연구의 결과는 비정형 형상에 적합한 구조시스템 대안의 우선순위를 설정하고 구조시스템 생성을 위해 형상으로부터 추출해내야 할 초기 파라미터를 선정하는데 활용할 수 있을 것으로 기대된다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.1
• /
• pp.57-62
• /
• 2015

Recently, thermography camera have been using for body-temperature monitoring. We report on fabrication of prototype thermography camera using the chalcogenide-glass lens and the camera test by analysis of thermal image. In this work, it was found out that thermography camera discerned body-temperature between 20 and $50^{\circ}C$ with noise equivalent temperature difference(NETD) of 87.7mK. It is confirmed that thermography camera using the chalcogenide-glass lens is applicable to the body-temperature monitoring system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1601-1604
• /
• 2005

The demand increasing of optical applications like as display devices derives interest for fabrication process. The product s development is apt to fabricate numerous thin and wide surfaces with micro pattern. Naturally that needs injection molding fabrication for the mass production. In existing manufacturing, the product quality is controlled by input fabrication condition from the outside. That can be called as a try and error method and not fundamentally solve the troubles; imperfect replication, war page, short shot, etc. To understand the cause and bring a solution, it is needed that check of changing in the cavity. This study can catch them. Data acquisition system about temperature and pressure distribution is settled and can get some data. From this research, other studies related with DAQ in cavity can start on the easier step.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.8
• /
• pp.796-805
• /
• 2009

In this paper, a fabrication process for PZT preform of 1-3 type piezo-composite were studied using powder injection molding (PIM). The viscosity and the Pressure-Volume-Temperature (PVT) characteristics of the fabricated PZT feedstock were analyzed. The filling patterns, pressure, temperature distributions, and forming defects of the preform were analyzed with 3D TIMON commercial packages during PIM process. Also the fabrication conditions and the delivery system of the preform were optimized during the entire PIM process. Based on the simulated results, the preform having uniform distributions of the PZT rod was fabricated with the PIM process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.171-172
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.23-24
• /
• 2007

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.341-342
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.599-600
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.445-446
• /
• 2012