• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.4
• /
• pp.201-207
• /
• 1979

The stow net now used in the Yellow Sea, are traditional bag net with the opening held by a lighter upper and a weighted lower beams standing against the current. Such bag net anchored at the bottom are known in many countries, particularly in the estuaries of large rivers, but more rarely in sea fisheries, because they are too much affected by the weather, moreover a permanent strong current is necessary. Some scientists intended to improve this fishing gear, using the shearing devices instead of a lighter upper and a weighted lower beams in order to widen mouth of the stow net however they are unsuccessful. One-fortieth scale model net of the stow net was tested in a circular water tank with an effective volume of $5.67m\times1.76m\times1.00m$ of observing the configuration and tension of the net. Experiments were carried out under the various combination including water velocity, spherical floats and elevating floats with the shearing hoods instead of the upper beam. We found those devices offered a very low resistance per net area to current compared with the spherical floats or upper beam, and had a fairly good shearing power at any velocity and direction of the current. The total resistance (R) of the model net to which shearing hoods and floats are attached can be induced by the following formula under the condition of 0.25m/sec to 0.5m/sec, $$R(kg)=3.11V^{1.54}$$ The height (h) of the improved model net (m-B) is higher than traditional model net(m-A) with upper and lower beams, m-A: h(cm)=89.22-2.42(V-15). $V\geqq15,\;cm/sec$ m-B: h(cm)=89.20-0.78V (V:cm/sec) The catch efficiency of improved model net is 1.5 times traditional model net.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.283-292
• /
• 2006

The Plastic material had been developed in the middle of the 19th century as an alternative material. Along with the development of the electrical engineering industry, it cropped up into center stage as an effective material and has increasingly expanded its use. As such, the plastic material has bound deep-seated ties with the design activities of industrial products, coming into the main material for a variety of industrial designs. Despite its dose affinity to design function in terms of its materialistic property, we have rarely seen examples of intensive study on the realtionship between plastics and designs. This study aims to find the importance that the substance affects industrial products in designs along with the development of plastic materials. With the objective in mind, we made a review of the streamline stylishness that had flourished in the twenties and thirties of the 19th century. Through this study, we understand that the plastic material has a close realtionshop with design activities in three different aspects. First, its amorphous state of nature makes it possible to change into any shape one desires in plastic surgery, which feature in turn influences the moulding of any design forms. Second, the plastic material is best suited to mass-manufacture, which induces to reduce the cost of production. Hence, the expansion of design industry. Third, the plastic material allows the multiple variety of colors, sensitivity, gloss and patterns and infinitely large possibility ranging from natural senses to human senses with the result that numberless diversity of designs cdould come into being.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.66-76
• /
• 2021

Electric arc furnace dust (EAFD) contains compounds, such as oxides and chlorides, including large quantities of Zn, Pb and Fe. An efficient and stable method for the extraction of metal elements from EAFD is the Rotary Kiln Process. This method is used to recover Zn in the form of crude ZnO (approximately 60%) via the addition of a reducing agent (coke, anthracite) and limestone (for basicity control) to EAFD. This process is commonly used in industry as well as in research and development. Currently, this method is used in many Korean commercial plants, producing approximately 150,000 tons of Crude ZnO per year. The majority of Zn is found in crude ZnO (approximately 76%). In addition components such as Pb, Cd, Sn, In, Fe, Cl, and F are present as oxides, chlorides, and alkaline compounds. This elements have an adverse effect on the zinc smelting process. Therefore, a refining process that eliminates these impurities is essential. In this study, we developed a process technology that efficiently separates Zn and Pb from byproducts (mainly chlorides). A bag filter was used to collect Zn and Pb generated during the dry purification process of crude ZnO. Pure components were recovered as metals or metal carbonate.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.1
• /
• pp.23-30
• /
• 2014

Purpose: The present study was aimed to figure out the correlation amongst the evaluation methods for critical micelle concentration, surface tension and protein cleaning efficacy to evaluate cleaning efficacy of contact lens care products. Methods: The critical micelle concentration of surfactants and the actual concentration of surfactants in contact lens care solutions were investigated by employing references published and related information. Surface tension of contact lens care solutions was measured by surface tension device at $25{\pm}1^{\circ}C$, and contact lenses made of lotrafilcon A, comfilcon A and balafilcon A were washed with contact lens care solutions after the incubation in artificial tears for 14 days and their cleaning efficacy was compared. Results: Among the 22 contact lens care products, 9 products provided the label of the concentration of surfactant, and 7 products showed higher concentration of surfactant than the critical micelle concentration reported in references. As a result of measuring surface tension, the surface tension of lens care products for soft contact lens was generally lower than other care products. When examined the removal effect of protein deposited on lens surface, it was known that the care products having lower surface tension showed higher protein removal efficiency. Conclusions: The surface tension is low when surfactant concentration in contact lens care solutions is high, and the removal effect of protein deposited is accordingly increased with the decrease of surface tension. Thus, these indicate the correlation amongst the evaluation methods for cleaning efficacy.

• Journal of Aquaculture
• /
• v.18 no.1
• /
• pp.26-30
• /
• 2005

A 10-week feeding trial was conducted to determine the optimum feeding rate of two extruded pellets (EP1 and EP2) and raw fish-based moist pellet (MP) for juvenile flounder. Two replicate groups of the fish (average weight of 27 g) were fed EP and MP three times daily at different feeding rate (satiation and $85\%$ satiation). Weight gain of fish was not affected by diet, but affected by feeding rate. Weight gain with satiation feeding group showed :t tendency to higher compared to that of fish with $85\%$ satiation feeding at the same diet. Feed efficiency of fish was affected by diet, but not feeding rate. Feed efficiency of fish fed the EP1 and EP2 was higher than that of fish fed the MP at the same feeding rate. Daily feed intake was affected by diet and feeding rate. Daily feed intake of fish fed with satiation was higher than that of fish with $85\%$ satiation at same diet, and this variable of fish fed the MP was higher than that of fish fed the EP 1 and EP2. Protein efficiency ratio of fish fed the MP was significantly lower than that of fish fed the EP1 and EP2 regardless of feeding rate. Lipid content of whole body was affected by diet, and that of fish fed the EP2 and MP at satiation feeding was the highest. It can be concluded that satiation feeding will be good and EP is better than MP for growth of juvenile flounder grown from 27 g to 51 g.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.9
• /
• pp.1179-1186
• /
• 2009

This study was carried out to investigate the effect of saengmaec-san on the level of blood glucose and serum components in streptozocin (STZ)-induced diabetic rats. The experimental groups were divided into normal group (normal), diabetic control group (Dia-control), 10% saengmaec-san (white ginseng) group (DA), 10% saengmaec-san (fermented white ginseng) group (DB), 10% saengmaec-san (fermented red ginseng) group (DC), 5% saengmaec-san (extruded and fermented white ginseng) group (DDL), 10% saengmaec-san (extruded and fermented white ginseng) group (DDH). The body weight after induction of diabetes was 85.4% in the Dia-control group compared with the normal group. But in the DA group, the body weight showed clear sign of recovery almost normal level after administration of saengmaec-san for two weeks. The food efficiency ratios (FER) were 5.94% in the normal group. But it was significantly decreased in the Dia-control group (0.58%). All the treatment groups showed increase of FER compared with the Dia-control group. The level of blood glucose was significantly increased in the STZ-induced diabetes groups but it was decreased in all the treatment groups after administration for 2 weeks. Serum creatinine level were significantly higher in the STZ-induced diabetes groups and after administration of saengmaeg-san for 2 weeks while the level of serum creatinine was decreased 33.3% in the DB group. After administration of saengmaec-san for two weeks, serum total cholesterol level were significantly lower in all treatment groups than the first day of the total cholesterol level. The level of serum triglyceride was increased in all the treatment groups compared with the first day of triglyceride level. The level of serum HDL-cholesterol, after STZ-induced diabetes, was decreased in all treatment groups but particularly in the DDL and DDH groups increased HDL-cholesterol level compared with the first day of the saengmaec-san administration. Compared with the beginning of experiment, Atherogenic index (AI) were significantly decreased in all treatment groups than the Dia-control group and showed clear sign of recovery almost normal level. These results suggested that the saengmaec-san could be developed as an antidiabetic agent.

• Clean Technology
• /
• v.30 no.2
• /
• pp.134-144
• /
• 2024

In this study, the mechanical stability of red mud was improved for its commercial use as a catalyst to effectively decompose HFC-134a, one of the seven major greenhouse gases. Red mud is an industrial waste discharged from aluminum production, but it can be used for the decomposition of HFC-134a. Red mud can be manufactured into a catalyst via the crushing-preparative-compression molding-firing process, and it is possible to improve the catalyst performance and secure mechanical stability through calcination. In order to determine the optimal heat treatment conditions, pellet-shaped compressed red mud samples were calcined at 300, 600, 800 ℃ using a muffle furnace for 5 hours. The mechanical stability was confirmed by the weight loss rate before and after ultra-sonication after the catalyst was immersed in distilled water. The catalyst calcined at 800 ℃ (RM 800) was found to have the best mechanical stability as well as the most catalytic activity. The catalyst performance and durability tests that were performed for 100 hours using the RM 800 catalyst showed thatmore than 99% of 1 mol% HFC-134a was degraded at 650 ℃, and no degradation in catalytic activity was observed. XRD analysis showed tri-calcium aluminate and gehlenite crystalline phases, which enhance mechanical strength and catalytic activity due to the interaction of Ca, Si, and Al after heat treatment at 800 ℃. SEM/EDS analysis of the durability tested catalysts showed no losses in active substances or shape changes due to HFC-134a abasement. Through this research, it is expected that red mud can be commercialized as a catalyst for waste refrigerant treatment due to its high economic feasibility, high decomposition efficiency and mechanical stability.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.865-873
• /
• 2013

The deep drawing and ironing (DDI) process involving the use of a high-capacity horizontal press is used for manufacturing acompressed natural gas (CNG) pressure vessel. However, some variables of the DDI process have been determined based on the experiences of workers, and the short die life needs to be improved for manufacturing the pressure vessel withhighquality and lowcost. In this study, process variables such as the draw ratio, distance between dies, radius of rounding of drawing die, and angle of ironing die are chosen to enhance the reliability and improve the die life based on previous studies and experiences. The draw ratio limits at which no tearing or wrinkling occurs are determined using FEA, and the distances between dies, radius of rounding of drawing die, and angle of ironing die are optimized by the DOE method. The results of the optimal process variables are compared with those of the existing DDI process for verifying their effectiveness.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.4
• /
• pp.365-371
• /
• 2005

In esthetic treatment of bimaxillary protrusion, it is important to move backward the anterior teeth segment. For the backward movement of the anterior teeth segment, orthodontic force and segmental osteotomy have been applied on the clinical treatment until recently. These methods caused long treatment time, anchorage loss, the possibility of root resorption and the complication followed by segmental osteotomy. Therefore, corticotomy has become a major concern lately. This research has been conducted to study the efficiency of corticotomy in the treatment of bimaxillary protrusion comparing the profile change, canine retraction velocity and space closing time. The research compared and analyzed space closing time, canine retraction velocity and profile change in two groups of patients. Both groups were formed out of patients over 18 years old who visited the department of dentistry in Hanyang University for treatments. The experimental group who was treated by corticotomy and Skeletal Anchorage System(SAS). The control group who received orthodontic treatment using SAS. The following results are produced after analyzing both groups. The significant statistic difference in space closing time has been observed in the experimental group as compared with the control group(p<0.05). In the experimental group, the significant statistic increase in canine retraction velocity was also observed(p<0.05). There was no significant difference in profile change between the control group and the experimental group(p<0.05). As a result, orthodontic treatment using corticotomy has a reasonable efficiency in space closing time as compared with the existing orthodontic treatment. Therefore, it is concluded that corticotomy with orthodontic treatment can be reasonably applied to dentofacial abnormality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.3815-3821
• /
• 2012

The LCD frame is an important part which supports the BLU of medium/large sized TFT-LCD. To produce it efficiently, it is necessary to achieve the molding process improvement from 1 cavity to 2 cavity system. Because 2 cavity mold is compact and its hot-runner zone is broadened, it is difficult to control the temperature on the mold. In this study, injection molding analysis on the frame in 2 cavity process with FEA(Finite Element Analysis) software is carried out to estimate its quality. The calculated injection molding pressures and maximum deflection in 1 and 2 cavity processes are 41.13 MPa and 1.62 mm, 40.49 MPa and 1.66 mm respectively. The measured maximum flexure load and surface roughness of the left and right frame of 2 cavities are 209 N and 0.08 ${\mu}m$, 193 N and 0.10 ${\mu}m$ while those in 1 cavity are 140 N and 0.13 ${\mu}m$. Thermal image shows that the maximum standard deviation of the temperature on left and right side of 2 cavity mold is $1.23^{\circ}C$. The simulation and measurement results show that the quality of the frame in 2 cavity injection molding process as a whole is not worse than that of 1 cavity system. But maximum flexure loads of the frame in 2 cavity process are far greater than that in 1 cavity process.