• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.08a
• /
• pp.265-265
• /
• 2008

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.3
• /
• pp.357-365
• /
• 2004

Effect of artificial circulation on amelioration of water quality in Yeoncho Lake was analyzed using summer data between 1991-2002. Two sites, intake tower area where aeration systems are concentrated in and near the inlet of reservoir were selected for comparison in this study. Summer averages between may and september Showed that aeration system might be beneficial in the improvement of water quality of BOD5, COD, and TN while Chl-a concentration and transparency did show opposite pattems. Wilcoxon's singed rank test for matched pair indicated slight increase of BOD5 and COD concentrations in the vicinity of intake tower while other variables did not show any significant differences from data of inlet of reservoir. During the study, it was found that the following subjects need to be investigated for more detailed analysis. 1) Dynamic pollutant loading from outside and inside the lake, 2) Biological, Chemical and Physical lake data when aeration systems are in and not in operation and 3) Radius of influence of aeration system.

• Journal of Apiculture
• /
• v.32 no.3
• /
• pp.163-170
• /
• 2017

Small hive beetle (SHB, Aethina tumida Murray (Coleoptera: Nitidulidae) is a honeybee pest infesting combs and stores inside the hive. Contamination of the SHB on Apis mellifera colonies were firstly noticed on September 23, 2016, in Miryang City, Gyeongnam Province in Korea. After that, on October 5, 2016, we investigated the spatial distribution of SHB inside the hive and outside soil within the apiary. Total of 169 beehives were observed. We found all stages of SHB inside or outside of hives. 61% of hives infested with the adult SHB still had live honeybees whereas hives containing larval SHB did not have bees, implying colony destruction In hives with live bees, infestation density was higher as bee population became higher. Coefficient of dispersions (CD) showed significant clumped distribution of infestation among hives. CDs were much higher inside hive than outside soil. Our results indicates SHB could result in honeybee colony collapse it not managed properly. Also even during October, there are new infestation into honeybee colonies and every stage of SHB could still be able to develop. Further detailed analysis of this insect' adaptation in Koran environment could help guide the management strategies of the invaded new pest of honeybee.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.377-385
• /
• 2012

Anoxic treatments using argon and nitrogen gas in controlled atmospheres have been used as a alternative to methyl bromide for insect disinfection in museums. Anoxic chamber system was manufactured and installed at The National Folk Museum of Korea for the first time in Korea. The internal capacity of anoxic chamber is 0.5m3 in which is able to use argon, nitrogen and carbon dioxide gas. This system is equipped with oxygen concentration, temperature and ralative humidity control devices and automatically controlled oxygen concentration from 0.01 to 20%, temperature from 10 to $50^{\circ}C$ and relative humidity 30 to 80%. To control the oxygen concentration, anoxic chamber system is adopted semi-dynamic method which supplies mixture of humidified gas and dry gas whenever oxygen concentration in chamber becomes higher than setting value. It has kept regularly oxygen concentration, temperature and relative humidity for 20 days using argon gas. To evaluate the disinfection of cigarette beetle larvae and adults and varied carpet beetle larvae, the anoxic chamber system maintained 0.01% of oxygen concentration, $25^{\circ}C$ in temperature and 50% in relative humidity for 30 days. Cigarette beetle larvae were killed in 7 days and adults in 3~5 days. And varied carpet beetle larvae were killed in 3 days. It reaches the conclusion form the evaluation this anoxic chamber system can be used to develop anoxic treatment as an alternative of methyl bromide for insect disinfection of infested cultural properties in museums.

• Parasites, Hosts and Diseases
• /
• v.25 no.1
• /
• pp.24-36
• /
• 1987

The effect of praziquantel on P. westermani exposed in vitro was observed by stereomicroscope, light microscope and scanning electron microscope. Following results were found. 1. The worms incubated in $0.01{\;}{\mu}g/ml$ praziquantel were moving after 26-hour incubation. However, all of them were immobilized immediately after incubation in solutions over $0.01{\;}{\mu}g/ml$ concentration. 2. All of the exposed worms showed severe vacuolization not only in tegument but in subtegument, intestine, ovary, testis, Mehlis' gland and excretory bladder. 3. Vacuoles in tegument burst out to form craters. As incubation time went on, tegumental structure was disintegrated severely. The worms exposed to praziquantel were observed to be immobilized and be vacuolized of all tissues. Disintegration of reproductive organs suggests that praziquantel have suppressive effect on egg production when the flukes are not killed. The drug effects were found more related with incubation time than with drug concentration.

• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.408-418
• /
• 2008

The rectangular resonant cavity was designed and characterized as a microwave plasma source for focused ion beam. The optimum cavity was calculated analytically and analyzed in detail by using HFSS(High Frequency Structure Simulator). Since the resonant cavity can be affected by the permittivity of quartz chamber and plasma, the cavity is designed to be changeable in one direction. By observing the microwave input power at which the breakdown begins, the optimum cavity length for breakdown is measured and compared with the calculated one, showing in good agreement with the optimum length reduced by 10cm according to the permittivity change in the presence of quartz chamber. The shape of breakdown power curve as a function of pressure appears to be similar to Paschen-curve. After breakdown, plasma densities increase with microwave power and the reduced effective permittivity in the cavity with plasma results in larger optimum length. However, it is not possible to optimize the cavity condition for high density plasmas with increased input power, because too high input power causes expansion of density cutoff region where microwave cannot penetrate. For more accurate microwave cavity design to generate high density plasma, plasma column inside and outside the density cutoff region needs to be treated as a conductor or dielectric.