• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.59-63
• /
• 2022

In recent years, research on smart factory wireless mobile communication technology that wirelessly remotely controls utilities is being actively conducted. The Wi-SUN(Wireless Smart Utility Network) Alliance proposed Wi-SUN protocol structure suitable for building a platform such as a smart factory as a new wireless communication standardization standard based on EEE802.15.4g/e. It analyzes the performance of the IEEE802.15.4e CSL(Coordinated Sampled Listening) Mode MAC(Media Access Control) in terms of power consumption and looks at considerations for efficient operation. Although CSL-MAC can dramatically reduce power consumption at the receiving end in an asynchronous manner, it has been found that the transmitting end has a disadvantage in that power consumption occurs due to an excessive wake-up sequence.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.545-550
• /
• 2023

A pretensioner is a safety device that protects occupants by pulling the seat belt in the event of a vehicle collision. However, since the pretensioner is driven by a explosive method, it is necessary to replace not only the gas generator but also all connecting parts including the manifold after an accident. Therefore, in this paper, we propose an elastic force-based pretensioner that can be used safely and semi-permanently. After analyzing the operating mechanism of the existing pretensioner from a thermodynamic/dynamic point of view, the spring stiffness that can be deployed within an appropriate operating time was determined by converting the gas explosion energy into elastic energy. In addition, the coil spring shape that satisfies the elastic stiffness was designed in consideration of the vehicle interior installation standard. Finally, the operating performance of the pretensioner driven by elastic force was verified through fabrication.

• Composites Research
• /
• v.20 no.3
• /
• pp.50-54
• /
• 2007

The Ionic Polymer Metal Composite (IPMC), an electro-active polymer, has many advantages including bending actuation, low weight, low power consumption, and flexibility. These advantages coincide with the requirements of a bio-related application. Thus, IPMC is promising materials for bio-mimetic actuator and sensor applications. Before applying IPMC to actual application, basic mechanical properties of IPMC should be studied in order to utilize IPMC for practical uses. Therefore, IPMCs are fabricated to investigate the mechanical characteristics. Nafion is used as a base ionic polymer. Mason samples cast with various thicknesses are used to test the thickness effects of IPMC. Subsequently, IPMC is fabricated using the chemical reduction method. The deformation, blocking force and frequency response of the IPMC actuator are important properties. In this present study, the performances of the IPMC actuators, including the deformation, blocking force and natural frequency, are then obtained according to only the input voltage and IPMC dimensions. Finally, the empirical performance model and the equivalent stiffness model of the IPMC actuator are established using experiments results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.473-473
• /
• 2021

새만금 유역의 하류 평야지대는 농업 관개 및 배수가 제수문의 영향을 받고 있으며, 상류 축산밀집시설에 따라 농업 비점오염원 유입이 수계 환경오염에 미치는 영향을 평가하는 것이 필요하다. 본 연구에서는 새만금 유역의 하류 제수문을 대상으로 유역 모형과 전산유체역학 모형을 이용하여 유입, 유출 그리고 오염원 등의 영향을 분석하고자 한다. SWAT (Soil and water assessment tool)은 유역 모형으로 수문순환 및 비점오염원을 모의하기 위해 개발한 모형이다. CFD(Computational fluid dynamics)는 구조물을 설계하고 유체, 기체 등의 역학을 모의할 수 있다. SWAT 모형을 이용하여 농촌 소유역을 대상으로 하류 제수문 위치를 출구로 지정하여 수문을 모의하고 그 결과자료는 CFD에 입력할 수 있다. CFD는 하류 제수문 구조물을 설계하고 SWAT 모형의 수문자료를 입력하여 제수문의 유입 및 유출 영향을 평가할 수 있다. SWAT 모형 구축을 위해 2015-2018년까지 기상, 수위, 유량 관측자료를 수집하였으며, 보정기간과 검증기간은 각 2년이며, 모형 성능 검증에 사용한 적합성 평가 지수는 R² (Determine coefficient), RMSE (Root mean square error), 그리고 NSE (Nash-sutcliffe efficiency coefficient)를 사용하였다. 모형의 보정은 SWAT-CUP 자동보정프로그램을 사용하였으며, 모형의 보정지수는 NSE를 사용하였고, 1,000회 반복 수행을 통해 매개변수를 최적화하였다. CFD 모형은 제수문의 실제 규격을 바탕으로 동일한 구조를 고려하였으며, 수문조작을 고려하여 유입 및 유출을 모의하였다. 본 연구는 유역차원과 구조물 차원의 모델링을 연계하는 것으로 최근 기후변화에 따라 급격히 변화하는 유역환경에 대처할 수 있는 방안이 될 수 있을 것이며, 제수문 시설을 관리하는 기관에서도 합리적인 운영방안에 대한 기초자료로 기여할 수 있을 것으로 사료된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.529-531
• /
• 2022

The 5th generation mobile communication (5G) is being commercialized by major domestic and foreign mobile telecommunication businesses and is spreading to general customers mainly on smart devices such as smartphones, wearables, and IoT. If 4G networks and 5G access equipment were utilized by introducing NSA(None-Stand Alone) technology when 5G was first introduced, recently, 5G convergence services are being realized by gradually expanding evolution to 5G standalone networks through SA (Stand Alone) technology. The purpose of this study is to study a design plan for implementing necessary service-oriented functions from the perspective of communication network users on the configuration of 5G SA equipment based on SBA(Service-based Architecture) mentioned in the 3GPP technical specification document. Through this research, it is expected that companies that need to enter the 5G market can easily access the 5G SA network to develop and supplement specialized 5G convergence services to improve product performance and quality.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.65-70
• /
• 2024

In recent years, research on smart factory wireless mobile communication technology that wirelessly remotely controls utilities is being actively conducted. The Wi-SUN (Wireless Smart Utility Network) Alliance proposed a Wi-SUN protocol structure suitable for building a platform such as a smart factory as a new wireless communication standardization standard based on EEE802.15.4g/e. It analyzes the performance of the IEEE802.15.4e Receiver Initiated Transmission(RIT) Mode Media Access Control (MAC) in terms of throughput and latency, and looks at considerations for efficient operation. RIT mode shows that as the check interval becomes longer, delay time and throughput decrease. It was shown that as the traffic load increases, if the RIT check interval is shortened, the delay time can be shortened and throughput can be increased. RIT mode has the advantage of low power consumption and has neutral characteristics between IEEE802.15.4 and CSL mode in terms of delay time and throughput.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.315-322
• /
• 2024

In this paper, we proposes real-time operating system based PCM encoder for telemetry system that must transmit frames within a set time. In the case of large aircraft, the complexity of the system is increasing because a lot of state information is measured from each sensor and peripheral device. In addition, as the amount measurement data increases, the role of PCM encoder to transmit frames within a set time is becoming important. Existing encoder is inflexible when changing specifications or implementing additional features. Therefore, a design is needed to supplement this. We propose a PCM encoder design applying uC/OS-II. In order to confirm the validity, a simulation was performed to measure the execution time of the task to confirm the performance.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.71-78
• /
• 2012

Recycled aggregates are made from construction wastes, and they have many national and social benefits by saving energy, developing substitute resources, and protecting environment. However, low-quality recycled aggregate with low density and high absorption rate cannot be used for structural concrete aggregate but is used mainly for low added value. Therefore, this study aims to identify the characteristics of the materials of recycled aggregates made after crashing and pulverizing waste concrete. For this, their major physical characteristics of cement content, absolute dry density, absorption rate, etc. were reviewed to make a mix design (draft) for the production of the secondary product and performance evaluation was done on the bending strength, absorption rate, bending strength after freezing and thawing, compressive strength, air-dried gravity, etc. of the test products produced by applying the mix design to compare the results with the quality standards of GR mark. The results of the tests showed that the substitution rate of recycled aggregate increased to 50~90 %, which is of superior quality than the performance standards of GR F 4007. Therefore, it is thought that they can be used for various construction works with certain physical characteristics applicable to the production of secondary concrete products using recycled aggregates.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.10
• /
• pp.1061-1070
• /
• 2009

In this paper, we have designed TDL(True-time Delay Line) for eliminating beam-squint occurring in active phased array antenna with large electrical size operated in wide bandwidth, and have tested its electrical performance. The proposed TDL device is composed of 4-bit microstrip delay line structure and MMIC amplifier for compensation of the delay-line loss. The measured results of gain and phase versus delay state satisfy the electrical requirements, also P1dB output power and noise figure meet the requirement. To verify the performance of fabricated TDL, we have simulated the beam patterns of wide-band active phased array antenna using the measured results and have certified the beam pattern compensation performance. As a result of simulated beam pattern compensation with respect to the 675.8 mm size antenna which is operated in X-band, 800 MHz bandwidth, we have reduced the beam squint error of ${\pm}1^{\circ}$ with ${\pm}0.1^{\circ}$. So this TDL module is able to be applied to active phase array antenna system.

• Journal of Energy Engineering
• /
• v.27 no.3
• /
• pp.1-9
• /
• 2018

In this study, the outdoor evaluation test was performed to characterize the highly-reflective artificial grass to be used for bifacial photovoltaic (PV) power generation system. The 60-cell n-type Si monofacial and bifacial PV modules were employed, where two types of bifacial modules were equipped with split-type and box-type junction boxes, respectively. The results showed that the split-type junction box improved the rear-side power production and thus energy yield of bifacial module compared to the box-type junction box causing the shadow effect. Highly-reflective artificial grass achieved relatively high albedo of 0.18, and excellent bifacial gain of 33%, compared to conventional artificial grass with an albedo of 0.14-0.15, and bifacial gain of 29-30%.