• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.86-86
• /
• 2018

볼트, 너트 등의 파스너는 건축 재료나 기계부품을 고정하는 데 사용하는 기계요소로, 건축, 철도, 조선 등 전 산업분야에 걸쳐 사용되고 있다. 그 중 스테인리스 소재의 볼트, 너트는 뛰어난 내식성과 저렴한 가격으로 널리 사용되고 있는데, 소재의 특성 및 작업현장의 상황, 온도의 변화 등의 원인에 의해 고착현상(galling)이 발생한다. 고착현상이란 성분 혹은 표면경도가 비슷한 금속의 나사산을 조이는 과정에서 발생하는 압력의 증가 및 마찰력에 의해 냉간 용접(cold welding)이 일어나는 것으로 나사산의 표면이 눌어붙게 된다. 이러한 고착현상은 스테인리스 소재에서 많이 발생하는데, 한번 발생한 후에는 비파괴 해소가 불가능한 상태가 되어 경제적 손실을 야기한다. 이러한 고착현상의 해소를 위해 본 연구에서는 주석과 알루미늄을 사용한 새로운 열 확산 코팅 기술을 개발하고 이를 304 스테인리스강에 적용하여 열처리 온도에 따른 특성변화를 확인하였다. 열 확산 코팅을 위해 팩 세멘테이션 방법을 이용하여 아르곤 분위기 하에서 열처리 하였고, 온도는 $200{\sim}250^{\circ}C$에서 코팅을 수행하였다. 이에 따른 코팅 전과 후의 표면 및 단면 분석을 통해 성공적으로 코팅층이 형성됨을 확인하였고, 온도가 증가함에 따라 코팅성분의 양이 증가하는 현상을 보임을 알 수 있었다. 또한, 고착방지성능을 확인하기 위하여 ASTM G196-08 시험을 통해 코팅조건에 따른 고착현상을 분석하였으며, 그 결과 기존에 코팅되지 않은 304 스테인리스강보다 고착현상이 개선됨을 확인하였다. 따라서 304 스테인리스강 소재의 볼트, 너트 제품에 주석-알루미늄 코팅층을 적용시키면 기존의 고착현상을 개선하고 서비스 품질을 향상시킬 수 있을 것으로 판단된다.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.3
• /
• pp.55-64
• /
• 2013

In this study, a series of the isotropic compression-expansion tests and the Undrained triaxial tests were performed on low-plastic silt of Pocheon stone sludge. Using the tests results the characteristic of the parameters of Lade's single hardening constitutive model were investigated. We also observed that predicted values from the Lade's single hardening constitutive model were well consistent with the observed data. In experimental results the deviator stress showed the work hardening behaviour after reaching its yield stress. Therefore practically useful failure criterion for low-plastic silt were required. The stress-strain behavior predicted by 11 soil parameters are compared with the results obtained 9 parameters by correlation between h and ${\eta}_1$ and constant ${\alpha}$. They are poor matched each other.

• Spatial Information Research
• /
• v.16 no.2
• /
• pp.263-278
• /
• 2008

Nowaday, local governments have planned to manage intelligent underground facilities through the u-City project. But, the intelligent underground facilities are in need of the progressive approach because of the required huge financial resources. Therefore, the objectives of this research are (1) to prioritize the monitoring items of sensing technology developments, (2) to study technological feasibilities, and (3) to discover the killer application which expands ripple effects on economy. To achieve these objectives, final monitoring items were derived from the business analysis of the water supply, the local government survey, the hearing expert opinions and so on. The priority order of final monitoring items were technology developments of (1) the flowmeter flux, (2) the water leakage/crack, (3) the pressure of water supply pipes, and (4) the flux of filtration plants. The research significance is obtained from the derivation and the evaluation of the priority order and the actual demand for the water supply facility management. And, the research results will contribute to the strategic planning for the underground facility intelligence.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.1
• /
• pp.53-60
• /
• 2005

The use of pipe-bends brings about non-uniform flows at the exit of them due to the velocity difference between inner and outer flows inside the bend. These phenomena may cause turbopump of satellite launch vehicle to run off-design and reduce its efficiency, and also introduce unstable influx of propellants to engine manifold after passing through a turbopump. In order to improve the uniformity of flow at the bend exit, certain turning vanes are set up in the bend pipe normally. Correspondingly the design is an $90^{\circ}\;and\;45^{\circ}$ bend pipes that incorporate with the maximum three turning vanes. All designs were analyzed with numerical analysis by solving the Navier-Stokes equations in three dimensions in case of each respective fuel and oxidizer. Evaluations of the vaned pipe bends designs were accomplished by the velocity magnitude distributions and the predicted pressure drops. We could find that the more vaned bend pipe and larger angle pipe under consideration effectively, the more uniform velocity magnitude of the bend and pressure losses.

• Journal of Korea Game Society
• /
• v.11 no.6
• /
• pp.33-42
• /
• 2011

In this study, game-aided human life type game design method is suggested. It mainly deals with the permissiveness of the game rules and coenesthesia of the game that are fitted with the agility of the elders such as the performance of a selective response. And 'Rolling hoops Balance Game' has been implemented by applying the game-aided human life type game. Since the pressure sensors are installed on each parts of the chair type game controller, to play the game, a gamer simply uses her hands and feet to press the sensors without requirements of the complex movements. The goal of the game are the leg muscles strength and improvement of the body balancing ability. In addition, the game graphics consists of sensory stimuli package(Namazi, Haynes, reminiscence therapy, 1994) to make friendly mood for elders. We have tested 50 elders who were more than 65 years old. 74% of them answered they were satisfied totally for the game play. It is a meaningful result that 88% of participants replied they would like to play the game again.

• Composites Research
• /
• v.13 no.4
• /
• pp.33-41
• /
• 2000

In this research, the mathematical modeling of the formation of SiC layer on the activated carbon was studied to improve the durability and the oxidation resistance of catalyst supports. SiC layer on the activated carbon was formed by permeating SiC from dichlorodimethylsilane(DDS) into pores and depositing while the porous structure was kept. The best conditions of manufacturing the support were found by studying the characteristics of SiC/C which was modelled under various deposition conditions. Changes of the amount of deposition, the pore diameter, the surface area with time were obtained by simulating convection, diffusion and reaction in an isothermal reactor at a steady state. The uniform deposition in the pores of samples was obtained at a lower concentration of the reactant and a lower pressure. Additionally, it was observed that the pore diameter and the surface area have points of inflection at certain times of deposition, because deposition occurred on the inside surface of the pore at first and then on the outside surface of the particle.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.6
• /
• pp.89-96
• /
• 2013

Considering the complexity and difficulty on the researching, how to enhance the performance of ejector-diffuser system effectively became a significant task. In the present study, the supersonic nozzle was redesigned using Chevrons installed at the inlet of the secondary stream of the ejector-diffuser system for the purpose of the performance improvement. A CFD method based on Fluent has been applied to simulate the supersonic flows and shock waves inside the ejector. Primary numerical analysis results show that the Chevrons get a positive effect on the ejector flows. The comparison of ejector performance with and without the Chevron was obtained and optimal number of chevron lobe is discussed to increase the performance. The ejector-diffuser system performance is discussed in terms of the entrainment ratio, pressure recovery as well as total pressure loss.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.2
• /
• pp.187-193
• /
• 2015

In this study, regressive models were employed to predict the blood velocity by using independent variables which measured by 3 sensors, such as electrocardiogram (ECG), photo-plethysmogram (PPG), pulse diagnosis sensor, without ultrasound device at high cost. In experiment, the high predictable model was induced to estimate the blood velocity correctly by comparing correlation values and significance probabilities between independent variables and blood velocities. Results showed that the model induced by two or three independent variables had a higher predictability than those by a single independent variable.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.1
• /
• pp.37-42
• /
• 2000

Copper thin films have been prepared by a metal organic chemical vapor deposition (MOCVD) technology on polyimide and TiN substrates. The Cu-MOCVD technology has advantages of the high deposition rate and the good step coverage compared with the conventional physical vapor deposition (PVD) technology in several industrial applications. The Cu films have been deposited with varying the experimental conditions of substrate temperatures and copper source vapor pressures. The films were annealed in a vacuum condition after the deposition, and the annealing effect on the electrical properties of the films was measured. The crystallinity and the microstructures of the films were observed by scanning electron microscopy (SEM), and the electrical resistivity was measured by 4-point probe. In the case of the Cu deposition on TiN substrate, the best electrical property of the films was measured for the samples prepared at 18$0^{\circ}C$. Very high deposition rate of the Cu film up to 250 nm/min was obtained on the polyimide substrate when the mixture of liquid and vapour precursor was used.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.336-337
• /
• 2007

현재 투명전극의 재료로 ITO, ZnO, $SnO_2$등의 재료가 주로 이용되며, 낮은 저항률을 장점으로 가지는 ITO 박막이 가장 널리 이용되고 있으나, 가격이 비싸다는 단점을 가지고 있다. 이 밖에도 ITO 박막보다 가격이 저렴한 ZnO박막에 대한 연구가 많이 진행되고 있으나, 고온에서의 열적 불안정성 등의 문제로 상용화되지는 못하고 있다. 그러나 $SnO_2$ 박막은 ITO와 ZnO 박막보다 저항률이 다소 높지만, 우수한 열적, 화학적 안정성과 저렴한 가격으로 ITO 박막을 대체할 투명전도막 재료로 주목받고 있다. 본 연구에서는 $SnO_2$박막의 저항률 향상을 위하여 ATO(Antimony doped Tin Oxide) 박막을 RF Magnetron Sputtering 법으로 Coming glass위에 증착하였으며, 박막 증착시 산소 유량의 변화가 ATO 박막의 구조적, 전기적 그리고 광학적 특성에 미치는 효과를 연구하였다. 본 실험에서는 동작압력을 10 mTorr, RF power를 250W로 고정하고 $O_2$ 유량을 부분적으로 변화시키면서 증착되어진 ATO 박막을 분석한 결과 Ar:$O_2$의 비가 90:10일 때 최적의 가스비율로써 우수한 구조적, 전기적 그리고 광학적 특성을 보임을 확인하였다.