• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.21 no.1
• /
• pp.75-81
• /
• 1985

The tensile and dielctric strength of the epoxied resin with bi-directional woven glass fibers with a laminate of two layers(G-10) are studied, and the test parameter is the angle between fiber orientation and the tensile axis. The obtained results may be summaried as follows: 1) when the angle between fiber orientation and tensile axis was varied from 0$^{\circ}$ to 45$^{\circ}$ the yield and fracture stresses have a tendency to decrease with increase in the angle. Especially, the decrease rates in the yield and fracture stresses are changed remarkably in the range of 0$^{\circ}$ to 15$^{\circ}$. 2) The fracture strain has showed the maximum value when the angle between fiber orientation and tensile axis is 45$^{\circ}$, and showed the rapid rate of change from 15$^{\circ}$ to 45$^{\circ}$. 3) For the sample with same angle between fiber orientation and tensile axis the maximum dielectric strength under compressive stress is decreased with increase in tensile stress, when the compressive stress is increased as a parameter of tensile stress. 4) When the angle between fiber orientation and tensile axis is 45$^{\circ}$, the dielectric strength showed the worst value, as the mechanical strength did.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.157-163
• /
• 2018

This study is aimed at controlling the fiber orientation and improve the fiber distribution in fiber-reinforced cement composites using blades that can be placed inside the existing nozzles. To optimize the blade parameters, multi-physics finite element analysis was performed that could account for the flow of the cementitious matrix material, the movement of the entrained fibers, and the interactions with the nozzle. As a result, this study defined the blade distance, length, and position as a function of the fiber length to be used in the field. The blades with a distance from 1.2 to 2.4 times the fiber length and length from 4 to 8 times the fiber length, as well as located at below 14 times the fzfiber length from the nozzle exit maintained the fiber orientation angle less than $5^{\circ}$. In addition, the blade-type nozzle proposed in the study can be attachable and detachable to the conventional casting equipment, and thus it can provide the usability and convenience in practical applications.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.429-432
• /
• 2009

The deformation and burst pressure of composite motor case highly depends on fiber material properties. Therefore, measuring exact fiber material properties is a priority item to develop a advanced composite motor case. However, the fiber material properties in composite motor case is very sensitive on the various processing variables (equipment, operator and environmental condition etc..)and size effect, so the fiber material properties can't be measured exactly from the existing specimen test method. This paper suggests a newly developed test method, hoop ring test, that is capable of pressure testing with ring specimens extracted from real composite motor case. The results of hoop ring test showed excellent agreement with measured fiber material properties from hydro-burst test with full scale composite motor cases.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.348-351
• /
• 1998

토목 및 건설용으로 사용되는 토목섬유 중 지오그리드는 경사와 위사 방향으로 10~100mm 크기의 aperture가 형성된 격자 구조를 갖는 것을 지칭하며 1980년대에 개발되어 토목공사에 적용되어 왔으며, 강도가 요구되는 방향으로 높은 인장강도를 지님으로써 도로의 기초 지반과 포장층의 보강, 제방과 사면의 보강 및 보강토 옹벽공사용 둥에 사용되고 있다. (중략)

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1976.04a
• /
• pp.182.1-182
• /
• 1976

지구상에 풍부한 섬유소자원의 사료화 연구에 있어서 화학적 처리와 발효방법이 널리 채택되고 있다. 여기에 따른 문제점으로서 가축의 기호성과 생산과정의 경제성을 들 수 있다. 볏짚같은 것은 소가 잘 먹는다는 사실과 바추동물의 소화기관을 가장 경제적인 발효소로 볼 수 있다는 점에서 생체내에서의 섬유소 발효능률향상을 수단으로한 새로운 연구방향을 제의한다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.483-484
• /
• 2010

In this paper, it was intended to understand the effect of the fiber orientation distribution on the tensile behavior of Intra High Performance Cementitious Composites (UHPCC) and to estimate flow-dependent fiber orientation distribution and the corresponding tensile behavior of UHPCC.

• Composites Research
• /
• v.20 no.5
• /
• pp.13-19
• /
• 2007

Fiber-reinforced thermoplastic composites not only approach almost near to the strength of thermosetting composite but also has excellent productivity, recycling property, and impact resistance, which are pointed as weaknesses of thermosetting composites. The study for strength calculation of one direction fiber-reinforced thermoplastic composites and the study measuring precisely fiber orientation distribution were presented. Need the systematic study for the data base that can predict mechanical properties of composite material and fiber orientation distribution by the fiber content ratio was not constructed. Therefore, this study was investigated what affect the fiber content ratio and fiber orientation distribution have on the strength of composites. Fiber-reinforced thermoplastic composites by changing fiber orientation distribution and the fiber content ratio were made. Tensile strength ratio of $0^{\circ}$ direction of fiber-reinforced composites increased being proportional the fiber content and fiber orientation function as change from isotropy(J=0) to anisotropy(J=1). But, tensile strength ratio of $90^{\circ}$ direction by separation of fiber filament decreased when tensile load is imposed fur width direction of reinforcement fiber length direction.

• Composites Research
• /
• v.32 no.1
• /
• pp.50-55
• /
• 2019

In this study, we investigated the effect of fiber alignment in helicoidal structure on the mechanical properties of biomimetic fiber-reinforced composites. Using finite element analysis, circular biomimetic fiber composites were designed and studied. Various amounts of pressure loads were applied to a surface of the composites, and then bending and failure behaviors of the composites were analyzed. The results showed various failure morphologies according to the orientation of the fibers, and it turned out that the fiber alignment in helicoidal structure significantly improved the bending strength of the composite under pressure loading. This was because the fiber alignment in various directions for each layer dispersed effectively the fracture energy from the external load into multiple directions.

• Composites Research
• /
• v.12 no.5
• /
• pp.80-86
• /
• 1999

Mechanical characteristics of composite laminates and cylindrical shell using scrim of glass scrim are evaluated in this paper. Composite laminates and cylindrical shells are made by inserting carbon scrim or glass scrim between layers. The mechanical properties are routinely characterized by ASTM stands. Experimental results show that the mechanical properties of UD prepreg in the transverse direction are highly improved by inderting scrims between layers.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.170-173
• /
• 1998

텐셀은 고결정성 부분이 섬유축방향으로 고배향되어 있어, 섬유축방향으로 피브릴이 발생하는데, 특히 습윤 상태에서는 팽윤에 의해 피브릴간의 결합력이 약해져 저배향 부분의 내부 피브릴 영역이 커져, 기계적 마찰을 부여하면 피브릴이 발생한다[1-6]. 텐셀의 피브릴화 경향은 목적에 따라서 장점과 단점이 될 수 있다. 텐셀의 피브릴화 가공은 피치스킨 효과, 태 향상, 반발감 등을 지닌 우수한 직물의 외관을 부여할 수 있다. (중략)