• Composites Research
• /
• v.25 no.1
• /
• pp.26-30
• /
• 2012

This study was focused on the measurement of thermal expansion coefficients for GRP pipe through strain gage circuits. First of all, thermal expansion coefficients of aluminum beam were measured to examine the validity of the suggested method by using various types of strain gage circuits. Thermal expansion coefficients of GRP pipes along axial and hoop directions were measured to investigate the effect of the location of strain gages, number of repeated measurements, and strain gage types with different thermal expansion coefficients on the thermal strains and the repeatability of measured results. According to the results, thermal expansion coefficients of GRP pipes along hoop direction were lower than those along axial direction due to the constraint effect of reinforced glass fibers on thermal strains along hoop direction. As measurements were repeated, thermal expansion coefficients of GRP pipes were slightly increased, but the degree of increase became smaller. Finally, the same thermal expansion coefficients were obtained irrespective of different types of strain gages with different thermal expansion coefficients if thermal strains of strain gages were compensated by using reference compensation specimen.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.242-245
• /
• 2003

Buckwheat contains dietary rutin, a flavonol glycoside, which is able to antagonize hypertension in human and has antioxidant activity. Monacolin K, a secondary metabolite produced by fungi Monascus species, is an effective specific inhibitor of cholesterol biosynthesis. To develop functional health food, dehulled buckwheat was fermented with Manascus ruber to produce Anka, and contents of rutin and monacolin K and Anka were determined. The rutin content in dehulled buckwheat decreased slightly after germination, but increased with the growth of sprout. Growth of fungi had no influence on rutin content in dehulled buckwheat Anka, Monacolin K content in fermented dehulled buckwheat malt was lower than that in dehulled buckwheat Anka. Monacolin K content in dehulled buckwheat Anka decreased with increasing length of sprout in fermented dehulled buckwheat malt, probably due to consumption of nutrients, such as polysaccharides as carbon sources, during sprouting for growth of M. ruber.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.6
• /
• pp.74-86
• /
• 2021

The composite lattice structure is a structure that supports the required load with the minimum weight and thickness. Composite lattice structure is manufactured by the filament winding process using impregnating high-strength carbon fiber with an epoxy resin. Filament winding process can laminate and manufacture only structurally necessary parts, composite lattice structure can be applied to aircraft fuselages, satellite and launch vehicles, and guided weapons to maximize weight reduction. In this paper, the development and evaluation of the composite lattice structure corresponding to the entire process from design, analysis, fabrication, and evaluation of large-scale cylindrical and conical composites lattice structure were performed. To be applicable to actual projectiles and guided weapons, we developed a cylindrical lattice structure with a diameter of 2,600 mm and a length of 2,000 mm, and a conical lattice structure with an upper diameter of 1,300 mm, a lower diameter of 2,500 mm, and a length of 900 mm. The performance of the developed composite lattice structure was evaluated through a load test.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2A
• /
• pp.289-295
• /
• 2008

The purpose of this study was to examine the flexural behavior of reinforced concrete beams strengthened with CFRP strips. A total of 12 rectangular beams were tested. Test variables in this study were the shapes, bonded length and the number of longitudinal layers of CFRP strips. From the experimental study, flexural capacity of the beams strengthened with CFRP strips significantly increased compared to the reinforced concrete beam without a CFRP strip. Maximum increase of ultimate strength was found about 120% more than the control beam. In this test, most of the strengthened beams failed suddenly due to the debonding of CFRP strips. It is also observed that the debonding of the strip was initiated in the flexural zone of the beam and propagated rapidly to the end of the beam. The ultimate tensile strains of CFRP strips in this test were occurred at the level of 36% of rupture tensile strength of the CFRP strip, and an analytical approach to compute the flexural strength of reinforced beams strengthened with CFRP strips based on the effective stresses was conducted.

• Journal of the Korean Society of Radiology
• /
• v.5 no.4
• /
• pp.189-194
• /
• 2011

This study used magnetic resonance diffusion tensor imaging (DTI) to quantitatively analyze the neural fiber tractography according to the age of normal corpus callosum and to evaluate of usefulness. The research was intended for the applicants of 60 persons that was in a good state of health with not brain or other disease. The test parameters were TR: 6650 ms, TE: 66 ms, FA: $90^{\circ}$, NEX: 2, thickness: 2 mm, no gap, FOV: 220 mm, b-value: $800s/mm^2$, sense factor: 2, acquisition matrix size: $2{\times}2{\times}2mm^3$, and the test time was 3 minutes 46 seconds. The evaluation method was constructed the color-cored FA map include to the skull vertex from the skull base in scan range. We set up the five ROI of corpus callosum of genu, anterior-mid body, posterior-mid body, isthmus, and splenium, tracking, respectively, and to quantitatively measured the length of neural fiber. As a result, the length of neural fiber, for the corpus callosum of genu was 20's: $61.8{\pm}6.8$, 30's: $63.9{\pm}3.8$, 40's: $65.5{\pm}6.4$, 50's: $57.8{\pm}6.0$, 60's: $58.9{\pm}4.5$, more than 70's: $54.1{\pm}8.1mm$, for the anterior-mid body was 20's: $54.8{\pm}8.8$, 30's: $58.5{\pm}7.9$, 40's: $54.8{\pm}7.8$, 50's: $56.1{\pm}10.2$, 60's: $48.5{\pm}6.2$, more than 70's: $48.6{\pm}8.3mm$, for the posterior-mid body was 20's: $72.7{\pm}9.1$, 30's: $61.6{\pm}9.1$, 40's: $60.9{\pm}10.5$, 50's: $61.4{\pm}11.7$, 60's: $54.9{\pm}10.0$, more than 70's: $53.1{\pm}10.5mm$, for the isthmus was 20's: $71.5{\pm}17.4$, 30's: $74.1{\pm}14.9$, 40's: $73.6{\pm}14.2$, 50's: $66.3{\pm}12.9$, 60's: $56.5{\pm}11.2$, more than 70's: $56.8{\pm}11.3mm$, and for the splenium was 20's: $82.6{\pm}6.8$, 30's: $86.9{\pm}6.4$, 40's: $83.1{\pm}7.1$, 50's: $81.5{\pm}7.4$, 60's: $78.6{\pm}6.0$, more than 70's: $80.55{\pm}8.6mm$. The length of neural fiber for normal corpus callosum were statistically significant in the genu(P=0.001), posterior-mid body(P=0.009), and istumus(P=0.012) of corpus callosum. In order of age, the length of neural fiber increased from 30s to 40s, as one grows older tended to decrease. For this reason, the nerve cells of brain could be confirmed through the neural fiber tractography to progress actively in middle age.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.290-297
• /
• 2017

The flexural behavior tests of UHPC segmental U-girder and composite U-girder which has 160MPa compressive strength and 15.4m length were carried out. The test variables are volume fraction of steel fibers and slab over the U-girder. Each U-girder has longitudinal re-bars in web and lower flange. PS tendons which has 2 of 15.2mm diameter in upper flange and PS tendons which has 7 of 15.2mm diameter in lower flange were arranged and prestressed at onetime in U-girder connection stage. Enough strong prestressing force which applied to U-girder due to ultra high performance concrete strength can withstand the self weight and dead load in U-girder stage. By comparison with the brittle behavior of U-girder, composite U-girder showed the stable and ductile behavior. After the construction of slab over U-girder, flexural load capacity of composite U-girder can bear the design load in final construction stage with only one time prestressing operation which already carried out in U-girder stage. This simple prestressing method due to the ultra high strength concrete have the advantage in construction step and cost. The shear key which has narrow space has the strong composite connection between ultra high strength concrete U-girder and high strength concrete slab didn't show any slip and opening right before failure load.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.4
• /
• pp.397-404
• /
• 1994

This experiment was conducted to determine best harvesting time and observe paeoniflorin and some chemical component concentrations of 4-year-old paeonia radix in Euisung and Milyang varieties. Concentrations of paeoniflorin and some chemical components were investigated at 8 periods from Feb. to Oct. Yield of paeonia radix was investigated in Aug. 19, Sep. 18 and Oct. 17. Paeoniflorin and some chemical components were changed seriously at May as flowering time and stabilized after June. The lowest dry matter ratio was 23% and the maximum shrinkage ratio was 47% in May during all the growing stages. Especially, the difference of paeoniflorin concentrations between Euisung and Milyang was about 2%, and paeoniflorin concentrations in Milyang were higher than in Euisung variety during all the stages. Serious infection of disease in October, stem length, stem number per stock and healthful stem ratio in October were more reduced than in August. Yield of paeonia radix was not different from August to September, but that of October harvest was obviously reduced by root-decay-disease. Reasonable harvesting time in 4-year-old paeonia radix was late August to mid-September. When infected shoot rate by disease were severely high, early harvest was more stable in the yield and quality aspects.

• Applied Microscopy
• /
• v.31 no.3
• /
• pp.223-233
• /
• 2001

The spermiogenesis of a Korean octopus, Octopus minor, inhabiting western of Korea Sea was observed by electron microscopy . The obtained results are as follows: The spermiogenesis of Octopus miner proceeds through four stages; early- , mid- , and late-spermatid, and mature sperm. An early spermatid is a spherical cell looking light due to the low electron density. The acrosome formed from Golgi complex of the upper nucleus looks dark due to the high electron density. The extra-nuclear rod (enr) stemming from proximal centriole is transformed from round shape into oval shape, elongating to the upper nucleus. In our observation, the axoneme was being formed from distal centriole, and the manchette composed of a number of microtubules is also found around nuclear membrane. In a mid-spermatid, chromatins in the nucleus contract shaping fine threads, and the manchette is also observed around nuclear membrane. Especially, the spherical acrosome is transformed into long oval one which is tinged with a number of horizontal stripes and has the middle electron density. In a late-spermatid, chromatins in the nucleus contract thick and short. Furthermore, the mitochondrial sleeve, in which the axoneme is surrounded with mitochondria, is observed at middle piece. The axoneme has a typical structure of 9+2 and around it, 9 coarse fibers are observed. Also in the acrosome cavity of mature sperm, horizontal striation is found. However, regularly spaced processes are peculiarly observed in there. A sperm is about 390 fm long, whose head is bent a little like a banana while the acrosome region is helical. In the middle piece of sperm, $11\sim12$ mitochondria are surrounding coarse fibers that reach the main piece of tail, while nothing but 9+2 structured axoneme is found in the end piece.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.746-756
• /
• 2015

The goal of this study was to review the wood shrinkage published in Journal of The Korean Wood Science and Technology from 1976 to 2015. Previous studies reported that shrinkage from Larix kaempferi in the tangential, radial, longitudinal directions ranged from 4.21%-9.79%, 2.09%-4.67%, 0.17%-0.33%, respectively. When different drying methods including closed cylinder drying, oven drying, and room temperature drying were used, volumetric shrinkage of Dipterocarpus grandiflorus was different, ranging from 31.6% to 21.0%. With an increment of the drying temperature of $115^{\circ}C$, $120^{\circ}C$, $125^{\circ}C$, the shrinkage of Larix kaempferi did not show a consistent trend. When sample size of Pinus densiflora was increased from $20{\times}20{\times}20mm$ to $100{\times}100{\times}100mm$, the tangential, radial and volumetric shrinkage decreased 2.61%, 1.32%, 0.80%, respectively. When a caliper having a sensitivity of 0.01 mm was used to measure $20mm^3$ specimen from Cryptomeria japonica, the measurement error occurred 1.97% in the radial direction and 35.7% in the longitudinal direction. From the previous studies, wood shrinkage could be influenced by sample size, drying method and measurement technique.

• Journal of Internet Computing and Services
• /
• v.12 no.5
• /
• pp.21-28
• /
• 2011

Recently medical and entertainment applications using conducting textile are suggested, but the data of conducting threads are not characterized, classified and verified. Only the data sheet published by manufacturing companies is available. Thus we need to verify the performances of the threading threads in communication. And we need a guideline if the existing communication protocols can be used for the conducting threads communication or the new specific communication protocols have to be developed for the communication. This paper classifies the characteristics of conducting threads made by domestic and overseas companies. Based on the criteria we classified conducting threads into three classes: class A, class B and class C. Further we carried out experiments to verify the adaptability of existing simple serial communication protocols such as RS232. Six different conducting threads are used in experiments and the length of each thread was 0.5m, 1m, 2m and 3m. The data transmission rate and error rate are collected and analyzed. RS485 is very prone to error due to static electricity from human and environment. So it may not be appropriate as long-distance communication protocol up to 12km which is possible in theory. RS232 shows stable and error-less data transmission ability even though every conducting thread didn’t show transmission capability over RS232. USB protocol shows high data rate transmission but the distance cannot be exceeded over 2m. Additionally, USB requires stable power supply. But if the power is supplied through conducting thread, its function is not.