• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.53-63
• /
• 2024

Adopting an engine igniter with high efficiency and ignition performance is essential for reliable operation of liquid rocket engines. In this study, we developed a spark torch igniter for a 450 N-scale methane-oxygen liquid rocket engine by conducting numerical analyses, igniter manufacturing and validation. Specifically, we conducted a parametric study for maximizing the enthalpy at the igniter exit, specifically by adjusting the mass flow rate, nozzle area ratio, fuel-oxidizer mixture ratio, and the igniter length-to-diameter. The heat transferred via the igniter nozzle exit was computed using 3-dimensional numerical simulations. We also manufactured and tested the igniter based on a deduced design to confirm ignition performance of the designed spark torch igniter. The igniter developed through this study could contribute to the development of practical propulsion systems such as upper-stage engines of small launch vehicles.

• Korean Chemical Engineering Research
• /
• v.62 no.2
• /
• pp.163-172
• /
• 2024

In this study, two different scenarios for ammonia liquefaction in the green ammonia manufacturing process were proposed, and the economic-feasibility and environmental impact of each scenario were analyzed. The two liquefaction processes involved gas-liquid separation before cooling at high pressure (high pressure cooling process) or after decompression without the gas-liquid separation (low pressure cooling process). The high-pressure cooling process requires higher capital costs due to the required installation of separation units and heat exchangers, but it offers relatively lower total utility costs of 91.03 $/hr and a reduced duty of 2.81 Gcal/hr. In contrast, although the low-pressure cooling process is simpler and cost-effective, it may encounter operational instability due to rapid pressure drops in the system. Environmental impact assessment revealed that the high-pressure cooling process is more environmentally friendly than the low-pressure cooling process, with an emission factor of 0.83 tCO₂eq less than the low-pressure cooling process, calculated based on power usage. Consequently, the outcomes of this study provide relevant scenario and a database for green ammonia synthesis process adaptable to various process conditions.

• Proceedings of the Korea Association of Information Systems Conference
• /
• 2003.05a
• /
• pp.55-73
• /
• 2003

As the development of wireless technologies continue, mobile stock trading has become a new channel for companies to reach their customers. This study examines the factors affecting customer acceptance of mobile stock trading services. The research model based on the previous studies was established and the research hypotheses were generated. The sample was divided into users and nonuser groups. The test results show that relative advantage and social influence are positively related to intention to accept mobile services as well as in intention to reuse, security risk is negatively related to intention to reuse, frequency of trading is positively related to intention to reuse, cost burden is negatively related to the probability of using mobile stock trading services, and social influence is positively related to the probability of using mobile services. The results also support that information quality and response time are positively related to relative advantage, and interface quality is negatively related to complexity. It is considered that the study results may help managers to increase customer use of mobile stock trading services.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.04a
• /
• pp.115-115
• /
• 2013

최근의 분진폭발은 플라스틱, 의약품, 목재, 곡물 저장고, 고체연료, 화학제품 제조공정 등을 포함하여 성형 및 가공 공정 등에서 화재폭발사고가 발생되고 있다. 폐목재를 재활용하여 PB(Particle board)를 생산하는 국내 제조사업장에서는 화재폭발 사고가 빈번히 발생하고 있어 예방대책이 요구되고 있다. 본 연구에서는 폐목재 제조공정의 사고예방과 목재분진 취급공정에 대한 안전대책 등을 제시하기 위하여 사고원인 물질인 폐목재 부유분진의 폭발특성실험을 실시하고 실험결과를 검토하였다. 또한 폐목재 분진의 화재폭발위험성을 상세히 평가하기 위하여 해당 물질의 자연발화점, 축열저장시험, 및 최소점화에너지 등의 화재폭발위험특성값을 실험적으로 조사하였다. 본 연구에서 사용한 폐목재 시료의 비구형 입자형태를 가지는데 입도분석기의 측정 결과 평균 입경은 $15.96{\mu}m$로 조사되었다. 또한 목재 분진의 함수율은 3.88%이며 중금속함유량은 1.73%이다. 자연발화점 측정결과 $225.5^{\circ}C$로서 비교적 낮게 측정되었고 퇴적분진에 대한 화재의 위험성은 높게 나타났다. 반면에 축열저장시험 결과를 통하여 공정관리 온도 및 보관온도를 $150^{\circ}C$ 이하로 관리하면 축열에 의한 자기분해 위험성은 낮은 것으로 판단되었다. 그러므로 축열에 의한 화재폭발 등의 위험성은 낮은 것으로 사료 된다. 최대폭발압력($P_{max}$)은 8.7 bar이며 폭발하한농도 (LEL)는 $60g/m^3$으로 나타났다. 부유분진의 폭발특성실험 결과 분진폭발지수(Kst)는 폭발등급 St 1 (0$bar{\cdot}m/s$)으로 나타났으며 폭발에 의한 위험성이 약한 분진으로 판정되었다. 최소점화에너지(MIE)는 10mJ < MIE <30mJ의 범위로 측정되었으며, 계산에 의해 추정된 최소점화 에너지(Es) 값은 14 mJ로서 일반적인 발화감도(Normal ignition sensitive)로 분류되었다. 이는 실질적인 점화원만 제거하여도 분진폭발을 예방할 수 있다는 것을 의미한다. 그러나 분진 폭발사고를 예방을 위하여 MIE값이 공정운전온도 $100^{\circ}C$ 초과 시에 급격히 낮아질 수 있으므로 운전 온도 설정에 있어서 주의가 필요하다.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.91-99
• /
• 2020

A liquid rocket engine goes through many tests to prove its performance before liftoff. It means the tests for setting ignition and start-up conditions or a test on design condition, which verifies the design performance. However, the development process requires verification of performance under off-design conditions through tests involving different operating conditions, which affects the duration of engine development. The off-design performance test is performed by altering the conditions of the propellant supplied to the engine in conjunction with the engine performance test that varies the opening of the control valves in the engine. This paper is based on the results of the engine tests performed at the KSLV-II engine test facilities in the Naro Space Center and describes the operations of the test facility for off-design condition test that changes the inlet conditions of the turbo-pump due to changes in the pressure and temperature of the propellant supplied to the test engines.

• Journal of the Korean Institute of Gas
• /
• v.21 no.4
• /
• pp.1-5
• /
• 2017

Leaking of natural gas, which is mostly methane, in a confined living space creates flammable atmosphere and gives rise to explosion accident. The minimum amount of leaked methane for explosion is highly dependent on the degree of mixing in the confined space. This paper proposes a method for estimating minimum amount of flammable gas for explosion by using Gaussian distribution explosion model(GDEM) and experimental explosion data. The explosion pressure in the confined space can be estimated by assuming the Gaussian distribution of flammable gas along the height of an enclosure and estimating the maximum amount of gas within flammable limits, combustion of the estimated gas with constant volume and adiabatic or isothermal mixing in the confined space. The predicted minimum gas amount for an explosion is tied to explosion pressure that results in a given building damage level. The result shows that very small amount of methane leaking in the confined space may results in a serious gas explosion accident. This result could be applied not only to setting the leak criteria for developing a gas safety appliance but also to accident investigating of explosion.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.41-47
• /
• 1999

In this paper, we report 3D-simulations of a plasma etching process by employing cell-removal algorithm takes into account the mask shadow effect os well as spillover errors. The developed simulator haas an input interface to take not only an analytic form but a Monte Carlo distribution of the ions. The graphic user interface(GUI) was also built into the simulator for UNIX environment. To demonstrate the capability of 3D-SURFILER(SURface proFILER), we have simulated for a typical contact hole structure with 36,000($30{\times}40{\times}30$) cells, which takes about 20 minutes with 10 Mbytes memory on sun ultra sparc 1. as an exemplary case, we calculated the etch profile during the reactive ion etching(RIE) of a contact hole wherein the aspect ratio is 1.57. Furthermore, we also simulated the dependence of a damage parameter and the evolution of topography as a function of the chamber pressure and the incident ion flux.

• The Korean Journal of Financial Management
• /
• v.8 no.1
• /
• pp.155-177
• /
• 1991

기업의 재무구조와 인플레이션과의 관계는 세율에 대한 다양한 형태의 가정을 통하여 연구, 분석되어 왔으나, 이 문제를 확실히 해결하지는 못하였다. 근자에 A. Marcus(1983)가 미국의 은행의 재무구조를 대상으로 한 시계열분석 결과에 의하면 명목이자율의 상승이 미국은행의 부채 대비 자본금 비율을 하락시키는 절대적 요인이 되었다고 한다. 본 연구의 목적은 인플레이션과 은행의 부채 대비 자본금 비율의 상관관계, 더욱 나아가서 은행자산의 위험도가 이 상관관계에 미치는 영향을 분석코자 한다. 본고는 은행규제기관(FDIC 등)의 부채비율과 은행자산(포트폴리오)의 위험도에 대한 규제하에서 은행이 부채(예금)와 자본금의 가치를 극대화하고자 하는 모델을 설정하여 기대 인플레이션 수준이 은행의 적정 자본비율과 자산의 위험도와 어떤 관계가 있는가를 밀러의 균형모델(Miller Equilibrium Model)을 원용하여 분석하였다. 밀러의 균형모델하에서는 기업의 재무구조는 기업가치와 무관한 것으로 나타나고 있다. 즉, 부채를 통한 자금조달에 의해 발생되는 한계세금혜택은 균형하에서는 사라진다는 이론이다. 따라서 인플레이션은 적정 재무구조에는 영향을 미치지 못하게 된다. 왜냐하면 인플레이션은 기업의 세후 부채조달비용과 회사채 투자자 수익에 동일한 영향을 미치기 때문이다. 그러나 은행의 경우 일반 기업과는 달리 은행규제기관의 부채비율 및 자산위험도에 대한 규제압력이 소위 암묵적 규제비용으로 작용하여 은행의 적정자본금비율은 부채(예금)를 통한 자금조달의 한계세금혜택과 이에 따른 한계규제바용이 동일하게 되는 경우에 결정된다. 밀러의 단순균형 모델하에서 한계세금혜택이 없는 것과는 달리 은행의 부채조달에 따른 한계규제비용이 존재하는 이유로 균형조건으로 한계세금이익이 존재하게 된다. 이 경우 인플레이션은 예금자의 실질 세후 예금이자를 상승시키는 것 이상으로 은행의 실질 세후 예금이자 지급비용을 하락시키게 되어 은행의 부채비율을 더욱 높이게 되는 원인이 된다. 또한 은행의 부채비율이 인플레이션과 정(正)의 관계에 있다면 은행규제의 강도에 따라 이 상관계수는 은행자산의 위험도와도 역시 정(正)의 관계에 있게 된다. 미국은행을 대상으로 한 회귀분석에서도 그들의 부채(예금)비율이 기대 인플레이션과 정(正)의 상관관계가 있음이 나타났고 그 상관계수는 은행자산의 위험도와 동일 방향으로 움직임이 판명되었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.10
• /
• pp.971-977
• /
• 2012

It is well known that the performance of a diesel injector is directly related to the power, emission, and fuel consumption of the diesel combustion engine. In this study, the injection response characteristics of CRDi injectors driven by a solenoid coil and a piezoceramic were investigated by using the AMESim simulation code. Some analytical parameters such as the fuel pressure and hole diameter were considered. From this study, it was shown that the piezo-driven injector had a faster response and had better control capability than the solenoid-driven injector. In addition, it was found that the piezo-driven injector can be utilized more effectively in a multiple injection scheme than a solenoid-driven injector.

• Journal of Sensor Science and Technology
• /
• v.4 no.4
• /
• pp.62-69
• /
• 1995

We have developed the digital radiography system applied by the one dimensional multiwire proportional chamber. X-ray position signals were obtained from anode wires which were connected to counters through amplifiers and discriminators. The chamber was made of gas flow type and detector gas was P10. The threshold voltage which gives to the discriminator is independent on the neighboring channels. This improved the uniformity of the detector. Then the differential nonlineality is ${\pm}4%$. Increasing the gas pressure, the spatial resolution is about 1.4-mm at which the pitch of the anode wire is 2-mm. The object is scanned in vertical direction to take an image. The number of pixels in the image is $32{\times}32$.