• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.29-30
• /
• 2006

나이모닉 일체형으로 사용되고 있는 선박용 2 행정 저속엔진의 배기밸브 스핀들을 고온, 고압, 배기가스 및 반복 충격 하중에 노출된 스핀들의 Head부분은 기존의 나이모닉 소재를 적용, 기존 재질의 우수한 성질을 유지하고 설계적으로 나이모닉 소재의 적용이 불필요한 Stem부는 오스텐나이트 계열의 SNCrW 소재를 사용하여 관성마찰 용접 방식으로 접합하여 제품을 제작하고, 접합부의 미세조직 관찰, 성분분석, 인장, 경도, 피로시험 등의 기계적, 금속적 특성평가를 통해 마찰용접제품에 대한 신뢰성을 확인하고 양산 생산을 위한 기술적 토대를 마련하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.265-270
• /
• 2010

This paper presents the rocket motor support structure to position solid rocket engine within a missile fuselage. When the rocket motor is mounted inside a missile fuselage, fuselage structure must be designed to withstand various structural problems resulting from inserted rocket motor such as axial thrust force, shock/vibration, axial deformation of the rocket motor tank in addition to the flight loads. The motor support structure system proposed in this paper proved to be very simple and efficient while satisfying all the design requirements.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.480-483
• /
• 2010

착륙장치는 완충장치를 이용하여 항공기 착륙 시의 충격을 흡수하는 역할을 한다. 여러 방식의 완충장치가 있으나, Oil에 의한 감쇠력과 Gas에 의한 스프링력을 이용하여 에너지를 흡수하는 유공압 방식이 가장널리 사용되고 있다. 착륙장치 성능해석에서는 다양한 착륙조건에 대한 Dynamic simulation을 통해 최적의 Orifice 형상과 Gas spring 특성을 결정하고, 설계에 필요한 착륙하중을 구하게 된다. 이 논문에서는 상용 프로그램인 VI-Aircraft를 이용한 착륙장치 성능해석 과정을 소개한다. 유공압 완충장치의 모델링 및 Landing simulation 결과를 분석하고, 이에 따른 완충효율 최적화 과정을 제시한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.886-889
• /
• 2014

차량이 도로를 달리는데 있어서 절대적으로 꼭 필요한 타이어의 기능으로는 자동차의 하중을 지탱하고 자동차의 방향 전환 유지와, 노면 충격을 흡수 완화하며, 엔진의 구동력과 브레이킹 시 제동력을 노면에 전달하는 등의 기능이 있다. 이런 기능을 수행함에 있어 타이어의 상태는 안전과 직결된다고 볼 수 있다. 주행 중 운전자가 아무리 운전을 잘한다고 하더라도 타이어의 불량으로 인한 사고를 방지할 수는 없다. 자동차의 주행 안정성을 위한 타이어의 문제 중 타이어의 편마모는 운전자의 운전습관과 휠 얼라이먼트의 이상 등으로 타이어의 특정 부위가 마모되는 증상을 일컫는데, 현재까지 점검 방법으로는 정비사가 타이어를 눈과 손으로 점검하여 판단하고 있어서 점검하는 기준이 주관적이며, 정확하게 검증할 수 없는 것이 현실이다. 이에 본 논문에서는 현실의 애매모호한 주관적인 검증기준의 단점을 보완하고자 타이어의 실제 이미지를 디지털 영상처리 기법을 사용하여 각 타이어의 마모 정도를 체크하여 편마모를 객관적으로 점검할 수 있는 시스템을 설계하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.501-504
• /
• 2014

자동차의 하중을 지탱하고 자동차의 방향 전환 유지와 노면 충격을 흡수 완화하며, 엔진의 구동력과 브레이크 작동 시 제동력을 노면에 전달하는 등의 기능을 수행하는 타이어의 상태는 안전과 직결되어 있다고 볼 수 있다. 주행 중 타이어의 불량으로 인한 사고는 무시할 수 없는 부분을 차지한다. 타이어의 편마모는 주행 안전성을 위한 타이어의 문제 중 하나로 운전자의 운전습관과 휠얼라이먼트의 이상 등으로 타이어의 특정 부위가 마모되는 증상을 말하는데, 객관적으로 정확하게 검증할 수 있는 측정방법이 없는 것이 현실이다. 본 논문에서는 현실의 주관적인 검증기준의 단점을 보완하고 키넥트 센서를 이용하여 각 타이어의 마모 정도를 체크하여 편마모를 객관적으로 검증할 수 있는 시스템을 설계하고자 한다.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.33-39
• /
• 2020

In this paper, we propose the design technique of the vehicle's load weight measuring system using tire pressure, which is one of the physical elements of tires. The proposed technique consists of four processes: noise correction by load and vibration, gas flow correction, data mixer and weight conversion. Noise correction by load and vibration eliminates noise that increases the tire's internal pressure due to external shocks and vibrations produced by the vehicle while it is in motion. In the gas flow correction process, the noise of the internal pressure of the tire is increased due to the temperature rise of the ground with respect to the data obtained through the noise correction process due to the load and vibration. In the data mixer process, the load and pressure on the tolerances the empty, median and the full load are classified according to the change in pressure of the tire that is delivered perpendicular to the tire in the event of cargo. In the weight conversion process, weight is expressed by weight through weight conversion algorithms using noise correction results by load and vibration and gas flow correction. The weight conversion algorithm calculates the weight conversion factor, which is the slope of the linear function with respect to the load and pressure change, and converts the weight. In order to evaluate the accuracy of the loading weight measurement system of the vehicle using the tire pneumatic system technique proposed in this paper, we propose the design technique of the vehicle's load weight measuring system using tire pressure, which is one of the physical elements of tires.. Noise correction results by load and vibration and gas flow data correction results showed reliable results. In addition, repeated weight precision test showed better weight accuracy than the standard value of 90% of domestic companies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.418-423
• /
• 2018

Recently, research and development of high-value leisure vessels has been carried out in Korea to revitalize the marine leisure industry and tap into the global maritime leisure market. FRP composite materials, which have excellent physical properties and are available for the manufacture of light hulls, are used widely. One of the most important design technologies is to secure structural safety of leisure vessels made from FRP composite materials. In this study, the structural strength was assessed for the design of an 8-meter high-speed planing leisure boat made from FRP composite materials. The design loads to verify the structural safety were calculated according to the rules for the classification of high speed light craft (KR, 2015), and structural analysis was conducted using a finite element model composed of an isotropic shell element, which has equivalent bending rigidity with the FRP sandwich panel. The analysis results were compared with the results of the strength test for fabricated specimens, and all internal structural components are sufficiently satisfied with the structural strength.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.7
• /
• pp.773-778
• /
• 2011

Accelerometers are widely used to measure the lateral vibrations of pipe-like structures such as a gun tube under impulse loads. Stress waves that precede the lateral vibrations due to the explosion within a gun contribute little to the vibrations, but saturate the accelerometer input. A mechanical filter eliminates this high-frequency stress wave and only transmits the signal corresponding to the lateral vibrations. The mechanical filter consists of a mechanical structure for mounting the accelerometers and a damping material. The low-pass filter characteristics are determined from the equivalent damping and stiffness property of this damping material. In this paper, we tested nine commercially available damping materials for their vibration characteristics by using a test rig. We also observed the change in the vibration characteristics while compressing the material. We designed and manufactured a mechanical filter and verified its filtering performance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.6
• /
• pp.573-579
• /
• 2016

Studies on the deformation behavior of materials subjected to impact loads have been carried out in various fields of engineering and industry. The deformation and fracture of members for these machines/structures are known to correspond to the intermediate strain-rate region. Therefore, for the structural design, it is necessary to consider the dynamic deformation behavior in these intermediate strain-rate ranges. However, there have been few reports with useful data about the deformation and fracture behavior at intermediate strain-rate ranges. Because the intermediate strain-rate region is located between quasi-static and high strain-rate regions, it is difficult to obtain the intermediate strain-rate using conventional reasonable test equipment. To solve this problem, in this study, the measurement reliability of the constructed drop-bar impact tensile test apparatus was established and the dynamic behavior at the intermediate strain-rate range of carbon steels was evaluated by utilizing the apparatus.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1379-1385
• /
• 2007

In domestic transitional zone design, there is regulation to prevent generation of irregular substructure behaviors that negatively influence in prevention of plasticity settlement on approach section and contact section as well as relieve overall track rigidity by reducing sectional foundation and track stiffness difference, but design guideline that considers dynamic behavior of transitional track in actual service line is very insignificant. Therefore in this study, characteristics of transitional track dynamic behaviors by substructure stiffness are researched and measured dynamic response of transitional track by substructure stiffness in order to prove correlation between substructure and track and calculate elasticity(stiffness) and track load of transitional track by using measurement and formula to provide basic information for developing design guideline considering dynamic behavior of service line transitional track.