• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.7
• /
• pp.703-711
• /
• 2008

In this paper, stabilizer which maintains the mixture ratio of gas generator of LRE has been introduced. Design criterion for the ideal performance of stabilizer was derived. Significant parameters on the performance of stabilizer were identified through mathematical model and gas generator system analysis. Also, simulation and test results of the gas generator system showed fair agreement, thus proving the validity of the mathematical model of the stabilizer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.1
• /
• pp.10-17
• /
• 2007

For the purpose of optimal control of anti-lock brake system, precise dynamic characteristics analysis of the hydraulic modulator, especially solenoid valve is necessary. However, most of researches so law have dealt with dynamic characteristic analysis of valve itself and the results have been restrictive to apply on the actual ABS modulator, where hydraulic pressure is acting. In this study, mathematical modeling and experimental analysis were executed in order to evaluate the valve dynamic characteristics when the hydraulic pressure applied. High pressure on the master cylinder effects on the valve dynamic characteristics have been analyzed quantitatively and performance improvement methods have been suggested varying the design factor. Consequently, results of solenoid valve dynamic characteristics analysis derived in the study can be utilized criteria for the optimal control of anti-lock brake system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.3-8
• /
• 2015

In this paper, we propose a blind equalization algorithm based on the error signal linearly combined a constellation-matched error (CME) and a non-constellation-matched error (non-CME). The new error signal was designed to include the non-CME term for reaching initial convergence and the CME term for improving intersymbol interference (ISI) performance of output signals, and it controls the error terms through a combining factor. By controlling the error terms, it generates an appropriate error signal for equalization process and improves convergence speed and ISI cancellation performance compared to those of conventional algorithms. In the simulation for 64-QAM and 256-QAM signals under the multipath channel and additive noise conditions, the proposed method was superior to CMA and CMA+DD concurrent equalization.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.3
• /
• pp.377-388
• /
• 2001

Software metrics provide effective methods for characterizing software. Metrics have traditionally been composed through the definition of an equation, but this approach restricted within a full understanding of every interrelationships among the parameters. This paper use fuzzy logic system that is capable of uniformly approximating any nonlinear function and applying cognitive psychology theory. First of all, we extract multiple regression equation from the factors of 12 software complexity metrics collected from Java programs. We apply cognitive psychology theory in program volume factor, and then measure program volume complexity to execute fuzzy learning. This approach is sound, thus serving as the groundwork for further exploration into the analysis and design of software metrics.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.203-209
• /
• 2014

The rear center-hinge bracket is designed for supporting and folding the rear-seat backrest. This bracket needs to be strong enough to be able to rigidly hold the rear-seat backrest and to withstand luggage loads from the car trunk that are generated when a vehicle is driving on the roads. Particularly, current accident studies report that many serious occupant injuries occurred when the rear-seat back easily folded inward toward the car interior, driven by the luggage loads in the trunk. Given this fact, the robust design of the rear center-hinge bracket that mainly supports the rear backrest has become more important for providing customer safety and preventing high warranty and durability problems. However, none of the studies have emphasized its significant role and considered its robust optimization. Therefore, this paper presents how the hinge-bracket design is optimized based on an application of the finite-element method coupled with the parameter design using Taguchi's design experiment. Finally, Taguchi method's application optimizes a robust center-hinge bracket that shows more rigid performance although it has lighter weight and thinner thickness.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.2
• /
• pp.79-84
• /
• 2016

A flexible electronic device deformed by external force causes the failure of a semiconductor die. Even without failure, the repeated elastic deformation changes carrier mobility in the channel and increases resistivity in the interconnection, which causes malfunction of the integrated circuits. Therefore it is desirable that a semiconductor die be placed on a neutral line where the mechanical stress is zero. In the present study, we investigated the effects of design factors on the position of neutral line by finite element analysis (FEA), and expected the possible failure behavior in a flexible face-down packaging system assuming flip-chip bonding of a silicon die. The thickness and material of the flexible substrate and the thickness of a silicon die were considered as design factors. The thickness of a flexible substrate was the most important factor for controlling the position of the neutral line. A three-dimensional FEA result showed that the von Mises stress higher than yield stress would be applied to copper bumps between a silicon die and a flexible substrate. Finally, we suggested a designing strategy for reducing the stress of a silicon die and copper bumps of a flexible face-down packaging system.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.2
• /
• pp.29-37
• /
• 1998

Linear equations of motion for submersibles are one of the rest important design parameters, which are used as a governing equation for the shape design and the controller design. But, the estimated maneuvering coefficients in equations of motion by using empirical formulae, theoretical calculations or model tests might have some errors. Therefore the maneuvering coefficients should be verified from sea trial test. In this study, parallel extended Kalman filter method, Nelder & Mead Simplex method and genetic algorithm were applied to the parameter identification of roll maneuvering coefficients based on sea trial data. As a result, it was verified that Nelder & Mead Simplex method gave the most satisfactory results for the mathmatical models and the sea trial data used in this study.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.4
• /
• pp.8-14
• /
• 2006

The important function of Ball-Stop part is to operate power shift using suitable pneumatic force for vehicle with more than 5 ton when a driver changes gear. In this paper, we have applied the concept of the DFSS(Design for Six Sigma) to robust design of Ball-Stop part. First, we have found the control factors which could mainly influence the performance of the Ball-Stop part. The simulations of contact between head and detent pin was performed to evaluate effect of control factors according to DOE(Design of experiment) by using $ADAMS^{(R)}$. Finally, we have obtained optimal levels of each factors using $MINITAB^{(R)}$. Through the comparison of the result of optimized design with one of inintial design, we have verified the usefulness of DFSS method which can be applied to robust design of mechanical systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.11
• /
• pp.1077-1084
• /
• 2017

Camshaft engines designed for constant engine loads have been applied to existing marine diesel engines. However, due to environmental regulations, electro-hydraulic servo mechanisms, which have a loaddependent cylinder liner jacket water cooling system (LDCL-JWCS), have been recently developed to individually control the temperature of the cylinders depending on the engine load. In this system, the 3-way valve, which prevents low temperature corrosion by reducing the temperature difference between the upper and lower parts of the cylinder, has been employed, but the outlet mass flow of the existing valve is low. In this study, the design of the internal shape of the 3-way valve was performed by analyzing the effects of the design parameters of the valve shape on the performance (i.e., the outlet mass flow rate and temperature). The proposed model was verified by comparing its performance to that of existing marine diesel engine valves.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.605-605
• /
• 2015

최근 지구온난화로 인해 전 세계적으로 기상이변이 발생하여 강우량과 집중호우 발생빈도가 증가하는 추세이다. 특히 동북아시아 지역은 인구밀도가 높아 강우량 및 집중호우 발생빈도 증가에 따른 도시홍수 발생확률이 높으며 홍수피해가 가중될 수 있다. 또한 도심지에 위치한 하천의 외수위 상승 및 배수시설 설계빈도 이상의 강우의 발생빈도가 증가하여, 기존 홍수방어대책으로는 제어하기 어려운 실정이다. "수자원장기종합계획(2011~2020), 2011, 국토해양부"에 따르면 기상청의 한반도 장기 미래 전망을 21세기말(2071년~2100년)에 대해 한국 평년 기온은 $4^{\circ}C$정도 상승하고, 강우량도 증가할 것으로 전망하고 있다. 따라서 도심지에 위치한 하천의 외수위 상승 및 배수실 설계빈도 이상의 강우가 빈번히 발생하여 기존 홍수방어대책으로는 제어하기 어려운 실정이다. 본 연구에서는 연구 대상지역인 서울, 북경, 도쿄 지역의 과거 도시홍수 사례의 비교분석을 통하여 집중호우 빈발, 기존 방재시설물의 기후변화 대응능력 부족, 저지대지역 지형적 영향, 무분별한 도시개발로 인한 도시지역 불투수면적의 증가, 고령화와 재해취약계층 등 여러 가지 도시홍수 재해 영향인자들을 제시하였다. 앞으로 도시홍수 발생의 근본 원인 파악 및 홍수관리 효과를 최대화 시킬 수 있는 대책 설립에 대한 연구가 필수적이다. 본 연구에서는 동북아시아 지역 도시홍수로 인한 인명 재산 피해를 최소화하기 위해 기존 한국, 중국, 일본 삼국의 주요 도시별 홍수에 대한 구조적 비구조적 방어대책을 종합하고 비교분석을 실시하였다. 향후, 국내외 도시홍수 저감대책 수립을 위한 참고자료로 활용될 수 있을 것으로 기대된다.