The CY can be said to function in various respect as a buffer zone between the maritime and overland inflow-outflow of container. The amount of storage area needed requires a very critical appraisal at pre-operational stage. A container terminal should be designed to handle and store containers in the most efficient and economic way possible. In order to achieve this aim it is necessary to figure out or forecast numbers and types of containers to be handled, CY area required, and internal handling systems to be adopted. This paper aims to calculate the CY area required for each container handling system in Mokpo New Port. The CY area required are directly dependent on the equipment being used and the storage demand. And also the CY area required depends on the dwell time. Furthermore, containers need to be segregated by destination, weight, class, FCL(full container load), LCL(less than container load), direction of travel, and sometimes by type and often by shipping line or service. Thus the full use of a storage area is not always possible as major unbalances and fluctuations in these flow occuring all the time. The calculating CY area must therefore be taken into account in terms of these operational factors. For solving such problem, all these factors have been applied to estimation of CY area in Mokpo New Port. The CY area required in Mokpo New Port was summarized in the conclusion section.
Kim, Sung Bae;Kim, Jang-Ho Jay;Kim, Tae Kyun;Eoh, Cheol Soo
KSCE Journal of Civil and Environmental Engineering Research
/
v.30
no.3A
/
pp.201-209
/
2010
Generally, PSC girder bridge uses total gross cross section to resist applied loads unlike reinforced concrete member. Also, it is used as short and middle span (less than 30 m) bridges due to advantages such as ease of design and construction, reduction of cost, and convenience of maintenance. But, due to recent increased public interests for environmental friendly and appearance appealing bridges all over the world, the demands for longer span bridges have been continuously increasing. This trend is shown not only in ordinary long span bridge types such as cable supported bridges but also in PSC girder bridges. In order to meet the increasing demands for new type of long span bridges, PSC hollow box girder with H-type steel as compression reinforcements is developed for bridge with a single span of more than 50 m. The developed PSC girder applies compressive prestressing at H-type compression reinforcements using unbonded PS tendon. The purpose of compressive prestressing is to recover plastic displacement of PSC girder after long term service by releasing the prestressing. The static test composed of 4 different stages in 3-point bending test is performed to verify safety of the bridge. First stage loading is applied until tensile cracks form. Then in second stage, the load is removed and the girder is unloaded. In third stage, after removal of loading, recovery of remaining plastic deformation is verified as the compressive prestressing is removed at H-type reinforcements. Then, in fourth stage, loading is continued until the girder fails. The experimental results showed that the first crack occurs at 1,615 kN with a corresponding displacement of 187.0 mm. The introduction of the additional compressive stress in the lower part of the girder from the removal of unbonded compressive prestressing of the H-type steel showed a capacity improvement of about 60% (7.7 mm) recovery of the residual deformation (18.7 mm) that occurred from load increase. By using prestressed H-type steel as compression reinforcements in the upper part of cross section, repair and rehabilitation of PSC girders are relatively easy, and the cost of maintenance is expected to decrease.
Internet is having strong impact on the consumer's decision making process. Information search has been done actively through internet today. The online reviews can be crucial information cue to evaluate the alternarive products. The online WOM(Word-Of-Mouth) effect depends on the characteristics of information sender, receiver, and WOM. This study is to examine the influence of the online word of mouth on the consumer purchase intention and the moderating role of product involvement, consumer regulatory focus and self-efficacy. Positive customer reviews on the products influence the purchase intention positively and negative customer reviews influence it negatively. Moderating role of involvement in the causal relation between the valence of online reviews and purchase intention is tested. In case of positive WOM, it is predicted that purchase intention for high involvement products is higher than that of low involvement. In case of negative WOM, purchase intention for high involvement product is lower than that of low involvement product. And this study invetigate the moderating role of regulatory focus. In case of positive WOM, it is predicted that promotion focus oriented consumers have higher purchase intention than prevention focus oriented consumers. In case of negative WOM, prediction is that prevention focus oriented consumers have lower purchase intention than promotion focus oriented consumers. Then we examine the moderating role of self efficacy in the causal relation between the valence of online reviews and purchase intention. In case of positive WOM, it is predicted that consumers with low self efficacy have higher purchase intention than consumers with high self efficacy. In case of negative WOM, it is predicted that consumers with low self efficacy have lower purchase intention than consumers with high self efficacy. Emprical results support our prediction and four hypotheses derived from our conceptual framework are all accepted. This study suggest that the level of product involvement, consumer regulatory focus and the level of self-efficacy influence the consumer responses of the valence of online reviews. Therefore marketers need to manage online reviews based on the level of product involvement, regulatory focus orientation and the level of self-efficacy of target consumers.
Hyunwoo Choi;Min Gyeong Jung;Hyeon Woo Jang;Dong Koo Kim
Environmental and Resource Economics Review
/
v.32
no.4
/
pp.217-238
/
2023
Currently, automobile tax in Korea is imposed by multiplying the vehicle's engine displacement by a certain tax rate. However, the need for revision is being raised as it is pointed out that the current system does not reflect the immediate task of reducing greenhouse gas emissions. Accordingly, this study focuses on the positive relationship between engine displacement and CO2 emissions, and seeks to calculate an appropriate automobile tax rate considering average CO2 emissions. To this end, first, we estimated the average annual CO2 emissions (kg/vehicle) for each engine displacement using the average CO2 emissions for each vehicle displacement as of 2020. Next, multiple scenarios were analyzed considering the standard tax rate at $75 per ton of CO2 emissions proposed by the IMF (2019). In particular, we compared the case of imposing a uniform carbon tax of $75 and the case of imposing a progressive tax based on CO2 emissions by displacement. According to the results, it was confirmed that the uniform tax rate proposed by the IMF is difficult to apply to Korea as it is due to the impact of a decrease in tax revenue, and a tax scheme needs to be designed appropriately considering maintenance of tax revenue according to the current automobile tax, greenhouse gas reduction effect, and automobile tax reform trends in developed countries. For example, in the case of the K3 (1,598cc) of Kia Motors, a representative compact car sold in Korea, if we compare the tax burdens for each tax scenario, the tax burden will be about 220,000 KRW under the current system, about 79,000 KRW under the uniform tax rate, about 83,000 KRW under the progressive tax rate, and about 240,000 KRW under the progressive tax rate similar to the UK tax system, respectively. In this way, this study identified the current statuses of automobile registration and tax in Korea, and automobile tax reform trends in major developed countries, and analyzed the impact of automobile tax reform considering engine displacement and CO2 emissions, focusing on the tax burden of the people.
KHNP's shared growth activities are based on such public good. Reflecting the characteristics of a comprehensive energy company, a high-tech plant company, and a leading company for shared growth, it presents strategies to link performance indicators with its partners and implements various measures. Key tasks include maintaining the nuclear power plant ecosystem, improving management conditions for partner companies, strengthening future capabilities of the nuclear power plant industry, and supporting a virtuous cycle of regional development. This is made by reflecting the specificity of nuclear power generation as much as possible, and is designed to reflect the spirit of shared growth through win-win and cooperation in order to solve the challenges of the times while considering the characteristics as much as possible as possible. KHNP's shared growth activities can be said to be the practice of the spirit of the times(Zeitgeist). The spirit of the times given to us now is that companies should strive for sustainable growth as social air. KHNP has been striving to establish a creative and leading shared growth ecosystem. In particular, considering the positions of partners, it has been promoting continuous system improvement to establish a fair trade culture and deregulation. In addition, it has continuously discovered and implemented new customized support projects that are effective for partner companies and local communities. To this end, efforts have been made for shared growth through organic collaboration with partners and stakeholders. As detailed tasks, it also presents fostering new markets and new industries, maintaining supply chains, and emergency support for COVID-19 to maintain the nuclear power plant ecosystem. This reflects the social public good after the recent COVID-19 incident. In order to improve the management conditions of partner companies, productivity improvement, human resources enhancement, and customized funding are being implemented as detailed tasks. This is a plan to practice win-win growth with partner companies emphasized by corporate social responsibility (CSR) and ISO 26000 while being faithful to the main job. Until now, ESG management has focused on the environmental field to cope with the catastrophe of climate change. According to KHNP is presenting a public enterprise-type model in the environmental field. In order to strengthen the future capabilities of the nuclear power plant industry as a state-of-the-art energy company, it has set tasks to attract investment from partner companies, localization and new technologies R&D, and commercialization of innovative technologies. This is an effort to develop advanced nuclear power plant technology as a concrete practical measure of eco-friendly development. Meanwhile, the EU is preparing a social taxonomy to focus on the social sector, another important axis in ESG management, following the Green Taxonomy, a classification system in the environmental sector. KHNP includes enhancing local vitality, increasing income for the underprivileged, and overcoming the COVID-19 crisis as part of its shared growth activities, which is a representative social taxonomy field. The draft social taxonomy being promoted by the EU was announced in July, and the contents promoted by KHNP are consistent with this, leading the practice of social taxonomy
Proceedings of the Korean Society of Crop Science Conference
/
2023.04a
/
pp.7-7
/
2023
Currently, the main technologies of various fourth industries are big data, the Internet of Things, artificial intelligence, blockchain, mixed reality (MR), and drones. In particular, "digital twin," which has recently become a global technological trend, is a concept of a virtual model that is expressed equally in physical objects and computers. By creating and simulating a Digital twin of software-virtualized assets instead of real physical assets, accurate information about the characteristics of real farming (current state, agricultural productivity, agricultural work scenarios, etc.) can be obtained. This study aims to streamline agricultural work through automatic water management, remote growth forecasting, drone control, and pest forecasting through the operation of an integrated control system by constructing digital twin data on the main production area of the nojinot industry and designing and building a smart farm complex. In addition, it aims to distribute digital environmental control agriculture in Korea that can reduce labor and improve crop productivity by minimizing environmental load through the use of appropriate amounts of fertilizers and pesticides through big data analysis. These open-field agricultural technologies can reduce labor through digital farming and cultivation management, optimize water use and prevent soil pollution in preparation for climate change, and quantitative growth management of open-field crops by securing digital data for the national cultivation environment. It is also a way to directly implement carbon-neutral RED++ activities by improving agricultural productivity. The analysis and prediction of growth status through the acquisition of the acquired high-precision and high-definition image-based crop growth data are very effective in digital farming work management. The Southern Crop Department of the National Institute of Food Science conducted research and development on various types of open-field agricultural smart farms such as underground point and underground drainage. In particular, from this year, commercialization is underway in earnest through the establishment of smart farm facilities and technology distribution for agricultural technology complexes across the country. In this study, we would like to describe the case of establishing the agricultural field that combines digital twin technology and open-field agricultural smart farm technology and future utilization plans.
Asia-Pacific Journal of Business Venturing and Entrepreneurship
/
v.18
no.1
/
pp.107-124
/
2023
As getting in 4th Industrial Revolution Times, Continuing Education Enrolled Students(CEES) trying to find loophole for jepordized current life and need job transfer have surged their interest significantly on starting new business to bring up their post career after retirement through self-improvement. Government and university have actively initiated diverse policies of promoting startup for CEES in kicking off entrepreneurship courses and programs. However, relevant main policy, 'The 2nd University Startup Education Five-Year Plan (draft)' have too chiefly focused on theoretical start-up education rather than practical courses, causing the problem of inappropriate support for implementing real startup and business (Ministry of Education, 2018). This study is brought to empirically investigate the effect of self-efficacy as perspective of the impact of entrepreneurship education on entrepreneurial intention and behavior to come up with problem of poor entrepreneurial environment and entrepreneurship education to CEES. As to empirical research, this paper deliver on-line survey to CEES from September to October 2022, collect 207 effective feedbacks, In order to verify the reliability of the scale, the Cronbach's Alpha Coefficient (Cronbach's α) was calculated, analyzed, and measured. For hypothesis test, this paper utilize the multiple regression analysis statistical analysis method and use the SPSS 22.0 statistical processing program. Empirical results show, first, it was found that self-efficacy had a significant effect on start-up education. Second, start-up education had a significant effect on the intention to start a business of adult learners. Third, start-up education had a significant effect on the start-up behavior of adult learners. Fourth, self-efficacy had a significant effect on the intention of adult learners to start a business. Fifth, self-efficacy had a significant effect on the start-up behavior of adult learners. Sixth, self-efficacy had a mediating effect in the relationship between entrepreneurship education and adult learners' intention to start a business. Seventh, self-efficacy had a complete mediating effect in the relationship between start-up education and adult learners' start-up behavior. This paper is brought three significant implications. First, main consideration developing entrepreneurship education tools for CEES need to falls on defining potential needs of CEES as segmenting as to coming up with diversity of CEES's characteristics such as gender, age, experience, education, and occupation. Second, as to design specific entrepreneurship education program, both practical training program of utilizing CEES's career field experience benchmarking best practice startup and venture cases from domestic and global, and professional startup program of CEES initiating directly startup from ideation to develop business plan with pitching and discussing. Third, entrepreneurship education for CEES should be designed to incubate self-efficacy to enhance entrepreneurial intention of implementing entrepreneurial behavior as a real, eventually leading solid support system of self-improvement for CEES' Retirement life planning.
This study aims to explore the effect of an appropriate technology program related to water acquisition and purification on scientific attitudes and creative problem-solving skills in elementary school students. Thus, this study developed a learning program related to the appropriate technology composed of 8 sessions, and some were for exploring water acquisition-related scientific principles and the appropriated technology of Warka Tower, and the others were for conducting water purification-related inquiry experiments, such as Life Straw and Drinkable Book, and the last two sessions were for presenting practical tasks through creative ideas and designs and carrying out the relevant campaign activities. For research subjects, this study selected 51 students from two sixth-grade classes, and after modifying the scientific attitude questionnaire and the creative problem-solving skill questionnaire fit for the environment and situation, this study conducted a paired-sample t-test by applying both the questionnaires before and after this program. In addition, while looking into the correlation between scientific attitudes and creative problem-solving skills, based on the post-test results, this study examined relationships between sub-domains perceived by the students after this program was applied. The results can be summarized as below. Out of all the scientific attitudes, curiosity, openness, cooperation, and creativity showed statistically significant results with an increase in the average value when their overall averages of the pre-test were compared with those of the post-test. With creative problem-solving skills, the domain of mastering a specific area and the domain of divergent thinking showed statistically significant results. The correlation analysis results showed that cooperation out of the scientific attitudes had a significant correlation with all the domains of creative problem-solving skills, especially showing the highest correlation coefficient with such sub-domains as critical and logical thinking. All the four domains of creative problem-solving skills showed a number of significant correlations with the sub-domains of scientific attitudes. Through the research results above, this study has several implications on how and where to apply such appropriate technology-related topics in the future and various responses from students.
Journal of The Korean Association For Science Education
/
v.44
no.2
/
pp.179-194
/
2024
The aim of this study was to explore how a novice science teacher's epistemological framing, characterized from her modeling instruction, evolved over time. We observed that the teachers' framing changed over time, as she collaborated with researchers to plan, facilitate, and reflect on a series of lessons to support students' small-group scientific modeling. We tried to understand how such experiences contributed to the changes in her framing. One 8th grade science teacher with two years of teaching experience participated in the study. The teacher collaborated with researchers for four months to co-plan and facilitate 18 lessons that included small-group scientific modeling. She also engaged in cogenerative reflection on the lessons for 13 times. All of her lessons and reflections were video-recorded, transcribed, and qualitatively analyzed for the purpose of the study. Our findings showed that the teacher's epistemological framing, characterized from her interactions with students during modeling lessons, evolved during the study period: transitioning from an emphasis on students merely "filling in blanks" to prioritizing "constructing personal reasoning" and ultimately to focusing on the "social construction of scientific reasoning." The teacher's perception about what students are capable of changed, as she observed students during the modeling lessons, and this led to the shifts in her framing. Furthermore, through her engagement in planning, implementing, and reflecting on modeling lessons with researchers, she came to recognize the value of student collaboration in knowledge-building processes. These results can offer implications for supporting and studying teachers' epistemological framing and modeling-based teaching by partnering with them.
The purpose of this study is to explore whether pre-service teachers majoring in earth science improve their perception of computational thinking through STEAM classes focused on engineering-based wave power plants. The STEAM class involved designing the most efficient wave power plant model. The survey on computational thinking practices, developed from previous research, was administered to 15 Earth science pre-service teachers to gauge their understanding of computational thinking. Each group developed an efficient wave power plant model based on the scientific principal of turbine operation using waves. The activities included problem recognition (problem solving), coding (coding and programming), creating a wave power plant model using a 3D printer (design and create model), and evaluating the output to correct errors (debugging). The pre-service teachers showed a high level of recognition of computational thinking practices, particularly in "logical thinking," with the top five practices out of 14 averaging five points each. However, participants lacked a clear understanding of certain computational thinking practices such as abstraction, problem decomposition, and using bid data, with their comprehension of these decreasing after the STEAM lesson. Although there was a significant reduction in the misconception that computational thinking is "playing online games" (from 4.06 to 0.86), some participants still equated it with "thinking like a computer" and "using a computer to do calculations". The study found slight improvements in "problem solving" (3.73 to 4.33), "pattern recognition" (3.53 to 3.66), and "best tool selection" (4.26 to 4.66). To enhance computational thinking skills, a practice-oriented curriculum should be offered. Additional STEAM classes on diverse topics could lead to a significant improvement in computational thinking practices. Therefore, establishing an educational curriculum for multisituational learning is essential.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.