• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.136-152
• /
• 2017

The thermodynamic models, PC-SAFT (Perturbed-Chain Statistical Associated Fluid Theory) state equation and the Two-model approach liquid activity coefficient model NRTL (Non Random Two Liquid) + Henry + Peng-Robinson, for modeling the Rectisol process using methanol aqueous solution as the $CO_2$ removal solvent were compared. In addition, to determine the new binary interaction parameters of the PC-SAFT state equations and the Henry's constant of the two-model approach, absorption equilibrium experiments between carbon dioxide and methanol at 273.25K and 262.35K were carried out and regression analysis was performed. The accuracy of the newly determined parameters was verified through the regression results of the experimental data. These model equations and validated parameters were used to model the carbon dioxide removal process. In the case of using the two-model approach, the methanol solvent flow rate required to remove 99.00% of $CO_2$ was estimated to be approximately 43.72% higher, the cooling water consumption in the distillation tower was 39.22% higher, and the steam consumption was 43.09% higher than that using PC-SAFT EOS. In conclusion, the Rectisol process operating under high pressure was designed to be larger than that using the PC-SAFT state equation when modeled using the liquid activity coefficient model equation with Henry's relation. For this reason, if the quantity of low-solubility gas components dissolved in a liquid at a constant temperature is proportional to the partial pressure of the gas phase, the carbon dioxide with high solubility in methanol does not predict the absorption characteristics between methanol and carbon dioxide.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_3
• /
• pp.821-834
• /
• 2017

The increase in the rate of industrialization due to urbanization has caused the Urban Heat Island phenomenon where the temperature of the city is higher than the surrounding area, and its intensity is increasing with climate change. Among the cities where heat island phenomenon occurs, Seoul city has different degree of urbanization, green area ratio, energy consumption, and population density in each administrative district, and as a result, the strength of heat island is also different. So It is necessary to analyze the difference of Urban Heat Island Intensity by administrative district and the cause. In this study, the UHI intensity of the administrative gu and the administrative dong were extracted from the Seoul metropolitan area and the differences among the administrative districts were examined. and linear regression analysis were conducted with The variables included in the three categories(weather condition, anthropogenic heat generation, and land use characteristics) to investigate the cause of the difference in heat UHI intensity in each administrative district. As a result of analysis, UHI Intensity was found to be different according to the characteristics of administrative gu, administrative dong, and surrounding environment. The difference in administrative dong was larger than gu unit, and the UHI Intensity of gu and the UHI Intensity distribution of dongs belonging to the gu were also different. Linear regression analysis showed that there was a difference in heat island development intensity according to the average wind speed, development degree, Soil Adjusted Vegetation Index (SAVI), Normalized Difference Built-up Index (NDBI) value. Among them, the SAVI and NDBI showed a difference in value up to the dong unit and The creation of a wind route environment for the mitigation of the heat island phenomenon is necessary for the administrative dong unit level. Therefore, it is considered that projects for mitigating heat island phenomenon such as land cover improvement plan, wind route improvement plan, and green wall surface plan for development area need to consider administrative dongs belonging to the gu rather than just considering the difference of administrative gu units. The results of this study are expected to provide the directions for urban thermal environment design and policy development in the future by deriving the necessity of analysis unit and the factors to be considered for the administrative city unit to mitigate the urban heat island phenomenon.

• Journal of Internet Computing and Services
• /
• v.19 no.1
• /
• pp.77-86
• /
• 2018

For the past few years, KISTI has been servicing an online simulation execution platform, called EDISON, allowing users to conduct simulations on various scientific applications supplied by diverse computational science and engineering disciplines. Typically, these simulations accompany large-scale computation and accordingly produce a huge volume of output data. One critical issue arising when conducting those simulations on an online platform stems from the fact that a number of users simultaneously submit to the platform their simulation requests (or jobs) with the same (or almost unchanging) input parameters or files, resulting in charging a significant burden on the platform. In other words, the same computing jobs lead to duplicate consumption computing and storage resources at an undesirably fast pace. To overcome excessive resource usage by such identical simulation requests, in this paper we introduce a novel framework, called IceSheet, to efficiently manage simulation data based on execution metadata, that is, provenance. The IceSheet framework captures and stores each provenance associated with a conducted simulation. The collected provenance records are utilized for not only inspecting duplicate simulation requests but also performing search on existing simulation results via an open-source search engine, ElasticSearch. In particular, this paper elaborates on the core components in the IceSheet framework to support the search and reuse on the stored simulation results. We implemented as prototype the proposed framework using the engine in conjunction with the online simulation execution platform. Our evaluation of the framework was performed on the real simulation execution-provenance records collected on the platform. Once the prototyped IceSheet framework fully functions with the platform, users can quickly search for past parameter values entered into desired simulation software and receive existing results on the same input parameter values on the software if any. Therefore, we expect that the proposed framework contributes to eliminating duplicate resource consumption and significantly reducing execution time on the same requests as previously-executed simulations.

• Journal of Nutrition and Health
• /
• v.50 no.2
• /
• pp.158-170
• /
• 2017

Purpose: The purpose of this study was to explore the relationship between milk intake and prevalence rates of chronic diseases using KNHANES data, and the significance of the relationship was tested based on meditators, socioeconomic status (income, education), dietary behaviors (smoking, alcohol drinking, breakfast, and eating out), and physical activity (walking, medium, and high). Methods: Using the 5th and 6th survey data of KNHANES, milk intake rates and presence of seven chronic diseases were summarized and analyzed by ANOVA for two groups of adult men and women as follows: hypertension, hypertriglyceridemia, low HDL-cholesterol, diabetes, abdominal obesity, obesity, and metabolic syndrome. The dependent variables for the presence of seven chronic diseases regressed with socioeconomic, dietary behavior, and physical activity variables according to Logistic models. The dependent variables for milk intake using predictor variables of socioeconomic, dietary behaviors and physical activity were analyzed according to Logistic models. Finally, the significant socioeconomic, dietary behavior, and physical activity variables in the above model along with milk intake as a control variable or mediator variable regressed with significant chronic diseases according to Logistic models. Results: Milk intake, socioeconomic status, dietary behaviors, and physical activity were significantly different among the two groups of adult men and women, which were also critical factors to the prevalence of chronic diseases. The dependent variable for prevalence of chronic diseases regressed with significant factors of socioeconomic status, dietary behavior, and physical activity variables according to chronic diseases using the control or mediator variable of milk intake and summarized as follows: For adult men, milk intake controlled the education effect on diabetes partly, alcohol on hypertension and hypertriglyceridemia, low HDL-cholesterol, metabolic syndrome, breakfast on metabolic syndrome, eating out on obesity, and medium physical activity on hypertriglyceridemia. For adult women, household income on hypertriglyceridemia, diabetes, abdominal obesity, education level on hypertension, alcohol drinking, eating out, and walking activity on abdominal obesity, alcohol, breakfast, eating out, walking activity on low HDL-cholesterol, and medium physical activity on hypertriglyceridemia and low HDL-cholesterol were partly controlled by milk intake. Other significant socioeconomic status, dietary behavior, and physical activity variables related to prevalence of chronic diseases were fully controlled or mediated by milk intake. Conclusion: This study shows that milk intake (daily more than 200 g) prevents chronic diseases such as hypertension, hypertriglyceridemia, low HDL-cholesterol, diabetes, obesity, abdominal obesity, and metabolic syndrome.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.43-71
• /
• 1999

This research is an experimental work of developing a construction material using municipal wastewater sludge as liner and cover materials for waste disposal landfill. Weathered granite soil and flyash, produced as a by-product in the power plant, were used as the primary additives to improve geotechnical engineering properties of sludge. For secondary additives, bentonite and cement were mixed with sludge to decrease the permeability and to increase the shear strength, respectively. Various laboratory test required to evaluate the design criteria for liner and cover materials, were carried out by changing the mixing ratio of sludge with the additives. Basic soil properties such as specific gravity, grain size distribution, liquid and plastic limits were measured to analyze their effects on permeability, compaction, compressibility and shear strength properties of mixtures. Laboratory compaction tests were conducted to find the maximum dry densities and the optimum moisture contents of mixtures, and their effectiveness of compaction in field was consequently evaluated. Permeability tests of variable heads with compacted samples, and the stress-controlled consolidation tests with measuring permeabilities of samples during consolidation process were performed to obtain permeability, and to find the compressibility as well as consolidational coefficients of mixtures, respectively. To evaluate the long term stability of sludges, creep tests were also conducted in parallel with permeability tests of variable heads. On the other hand, for the compacted sludge decomposed for a month, permeability tests were carried out to investigate the effect of decomposition of organic matters in sludges on its permeability. Direct shear tests were performed to evaluate the shear strength parameters of mixed sludge with weathered granite, flyash and bentonite. For the mixture of sludge with cement, unconfined compression tests were carried out to find their strength with varying mixing ratio and curing time. On the other hand, CBR tests for compacted specimen were also conducted to evaluate the trafficability of mixtures. Various test results with mixtures were assessed to evaluate whether their properties meet the requirements as liner and cover materials in waste disposal landfill.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.659-668
• /
• 2006

The optimization of supercritical water oxidation (SCWO) process for decomposing nitromethane was studied by means of a design of experiments. The optimum operating region for the SCWO process to minimize COD and T-N of treated water was obtained in a lab scale unit. The authors had compared the results from a SCWO pilot plant with those from a lab scale system to explore the problems of scale-up of SCWO process. The COD and T-N in treated waters were selected as key process output variables (KPOV) for optimization, and the reaction temperature (Temp) and the mole ratio of nitromethane to ammonium hydroxide (NAR) were selected as key process input variables (KPIV) through the preliminary tests. The central composite design as a statistical design of experiments was applied to the optimization, and the experimental results were analyzed by means of the response surface method. From the main effects analysis, it was declared that COD of treated water steeply decreased with increasing Temp but slightly decreased with an increase in NAR, and T-N decreased with increasing both Temp and NAR. At lower Temp as $420{\sim}430^{\circ}C$, the T-N steeply decreased with an increase in NAR, however its variation was negligible at higher Temp above $450^{\circ}C$. The regression equations for COD and T-N were obtained as quadratic models with coded Temp and NAR, and they were confirmed with coefficient of determination ($r^2$) and normality of standardized residuals. The optimum operating region was defined as Temp $450-460^{\circ}C$ and NAR 1.03-1.08 by the intersection area of COD < 2 mg/L and T-N < 40 mg/L with regression equations and considering corrosion prevention. To confirm the optimization results and investigate the scale-up problems of SCWO process, the nitromethane was decomposed in a pilot plant. The experimental results from a SCWO pilot plant were compared with regression equations of COD and T-N, respectively. The results of COD and T-N from a pilot plant could be predicted well with regression equations which were derived in a lab scale SCWO system, although the errors of pilot plant data were larger than lab ones. The predictabilities were confirmed by the parity plots and the normality analyses of standardized residuals.

• Food Engineering Progress
• /
• v.14 no.3
• /
• pp.193-201
• /
• 2010

The aim of this study was to analyse the quality of Yukwa puffed by using a vacuum puffing machine and compare to deep-fried Yukwa. The effect of vacuum puffing condition including heating temperature(100-${160^{\circ}C}$), preheating time(0-8 min) and vacuum puffing time(5-20 min) on physical and microstructure characteristics of the Yukwa was investigated. Vacuum puffed Yukwa at ${100^{\circ}C}$ heating temperature, 6 min preheating time and 10 min puffing time had highest value in volumetric expansion ratio(10.04) and lowest value in bulk density(0.15 g/$cm^{3}$). The breaking strength showed the lowest value of 140 g/$cm^{3}$ in vacuum puffing Yukwa at ${100^{\circ}C}$ heating temperature, 6 min preheating time and 15 min puffing time. The Yukwa puffed with the vacuum puffing machine at ${100^{\circ}C}$ heating temperature, 6 min preheating time and 15 min puffing time had the higher value of bulk density and the lower value of volumetric expansion ratio than those of deep-fried Yukwa. Increasing preheating time and vacuum puffing time caused an increase in white and an decrease in yellowness. The vacuum-puffed Yukwa exhibited smaller and uniform cell structure, while deep-fried Yukwa exhibited apparently in larger pores inside and smaller pores near the surface layer. The optimum condition of vacuum puffing machine for the production of vacuum-puffing Yukwa was ${120^{\circ}C}$ heating temperature, 4 min preheating time and 5 min puffing time.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.94-101
• /
• 2023

In this study, the development performance of the head bars, which is SD700, was experimentally evaluated at the RC (reinforced concrete) or SFRC (steel fiber reinforced concrete external beam-column joint. A total of 10 specimens were tested, and variables such as steel fibers, length of settlement, effective depth of the beam, and stirrups of the column were planned. As a result of the experiment, the specimens showed side-face blowout, concrete breakout, and shear failure depending on the experimental variables. In the RC series experiments with development length as a variable, it was confirmed that the development strength increased by 26.5~42.2% as the development length increased by 25-80%, which was not proportional to the development length. JD-based experiments with twice the effective depth of beams showed concrete breakout failure, reducing the maximum strength by 31.5% to 62% compared to the reference experiment. The S-series experiment, in which the spacing of the shear reinforcement around the enlarged head reinforcement was 1/2 times that of the reference experiment, increased the maximum strength by 8.4 to 9.7%. The concrete compressive strength of SFRC was evaluated to be 29.3% smaller than the concrete compressive strength of RC, but the development strength of SFRC specimens increased by 7.3% to 12.2%. Accordingly it was confirmed that the development performance of the head bar was greatly improved by reinforcing the steel fiber. Considering the results of 92% and 99% of the experimental maximum strength of the experiment arranged with 92% and 110% of the KDS-based settlement length, it is judged that the safety rate needs to be considered even more. In addition, it is required to present a design formula that considers the effective depth of the beam compared to the development length.

• Health Policy and Management
• /
• v.34 no.3
• /
• pp.334-346
• /
• 2024

Background: Research on the link between subjective health and unmet healthcare needs is limited. This study examines whether experiences of subjective healthcare needs and unmet needs are related to subjective health in South Korea, where the rate of poor subjective health is notably high. Methods: This analysis utilized data from the Korea Health Panel (2014-2018), incorporating 68,930 observations from 16,535 adults aged 19 or older. The dependent variable, subjective health, was dichotomized into poor (bad or very bad) and non-poor (fair, good, or very good) categories. The primary variables of interest were the experiences of subjective healthcare needs and unmet needs, while control variables included 14 socio-demographic, health, and functional characteristics. The study employed population proportion analysis and multivariable two-level binary logistic regression analysis for each gender, accounting for the complex sampling design. Results: In 2018, the rate of reporting poor health was 8.7% (95% confidence interval [CI], 8.0%-9.5%) for men and 14.7% (95% CI, 13.8%-15.6%) for women. For both genders, compared to individuals whose healthcare needs were met, those without healthcare needs were less likely to report poor subjective health (adjusted odds ratio [AOR], 0.58; 95% CI, 0.39-0.86 for men; AOR, 0.59; 95% CI, 0.37-0.93 for women). Conversely, individuals whose healthcare needs were not met were more likely to report poor subjective health (AOR, 2.31; 95% CI, 2.01-2.65 for men; AOR, 2.19; 95% CI, 1.98-2.43 for women). A policy simulation indicated that reducing the experience of subjective healthcare needs would be approximately 5 times more effective in reducing poor subjective health than a policy focused on reducing the experience of unmet needs. Conclusion: South Korea must make significant efforts to reduce the deterioration of subjective health and promote appropriate healthcare utilization. To achieve this, a set of policies is recommended to address subjective healthcare needs. These policies should include (1) prompting individuals to proactively manage their own health, (2) providing primary healthcare similar to that in advanced countries, (3) ensuring the healthcare delivery system operates effectively, (4) decentralizing the healthcare management system, and (5) reducing the likelihood of people being misled into thinking they have a healthcare need.

• Health Policy and Management
• /
• v.34 no.3
• /
• pp.261-270
• /
• 2024

Background: Various researchers are calculating the health adjusted life expectancy (HALE) at the regional level in South Korea using several methods, most studies merely enumerate the differences in healthy life expectancy based on social characteristics. This study aims to analyze the association between various sociodemographic factors and HALE at the regional level. Methods: To calculate HALE, we utilized the various data sources, including National Health Insurance claims data, and applied the Sullivan's method. We conducted multiple linear regression with regional socioeconomic variables from Korean Statistical Information Service. For the multiple linear regression analysis, we designed three regression models. Model 1 comprised solely socioeconomic variables, model 2 involved both socioeconomic variables and individual health behaviors, and model 3 integrated model 2 with healthcare utilization. Results: The analysis shows that an increase in financial independence (p<0.05), population density (p<0.1), and the number of doctors (p<0.05) associated with an increase in HALE, whereas an increase in the number of beds (p<0.01) was associated with a decrease in HALE. In case of the obesity rate, in model 2 (p<0.1) and model 3 (p<0.05), there was a negative association between HALE and obesity rate. Conclusion: Amidst various variables, it was observed that increased financial independence in specific regions had association with an increase in HALE, highlighting the need for stronger local governance in South Korea. Additionally, the inverse association between hospital beds and HALE suggests several implications, such as the appropriate deployment of healthcare resources. To gain a deeper understanding of the relationship between hospital beds and HALE, further analysis distinguishing different types of hospital beds across healthcare institutions seems necessary.