• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.467-475
• /
• 2009

Existing studies have suggested Universal Curve only for supplemental damping by damper. Therefore net damping has been determined by means of arithmetic summation between intrinsic, aero-damping of cable and supplemental damping of damper. However linear combination approach by means of the arithmetic summation is not enough theoretical background. So validity of this approach should be verified in order to design adequate cable-damper system by engineers. This study establishes governing differential equation which can consider intrinsic, aero-damping and supplemental damping as well. And also analysis method is solved by combination of muller method and successive iteration method. Consequently, this study succeeds in verification for validity of linear combination approach. As a result of this study, linear combination approach is limitedly effective in case of low stiffness and optimum damping coefficient of damper, short distance from support to damper, lower vibration mode, low aero-damping, and normal windy environment. Whereas this study will be effective in case of opposite conditions, and existing studies or linear combination approach occur to further error. Meaning of this study presents exact solution for net damping of cable-damper system, and verifies linear combination approach by means of the analysis method. In the future, if monitoring of optimum damping coefficient of a damper against aero-damping is feasible on time, algorithm of this study will be available for control of cable and semi-active damper system such as magneto-rheological damper.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.9 no.13
• /
• pp.45-50
• /
• 1986

본 연구에서 고찰한 surrogate relaxation은 Lagrangian relaxation 방법과는 달리 제약식들을 선형조합으로 묶어 문제를 푼다. 수리계획 분계가 convexity를 만족하지 못하는 경우에는 Lagrangian의 경우와 마찬가지로 surrogate gap이 발생한다. Lagrangian 쌍대이론을 토대로 surrogate optimality condition을 알아보고 수리계획법의 특별 형태인 정수선형계획법에 적용해 보았다. 일반적으로 surrogate gap은 Lagrangian gap 보다 작기 때문에 좀더 근사하게 원 문제의 최적 목적 함수값에 접근할 수 있다. 따라서 branch and bound 알고리즘을 개발할 때 중요한 정보를 제공하는 것이다.

• Journal of Korean Society of Forest Science
• /
• v.85 no.2
• /
• pp.172-179
• /
• 1996

This paper described the application of fuzzy multiobjective linear programming to solving a multiple-use problem of forest resources management. At first the concepts of linear programming, fuzzy linear programming and fuzzy multiobjective linear programming were introduced briefly. In order to illustrate a role of fuzzy multiobjective linear programming in the process of multiple-use forest planning, the natural recreation forest in Mt. Yoomyung was selected for this study. A fuzzy multiobjective linear programming model is formulated with data obtained from this Mt. Yoomyumg natural recreation forest to solve the multiple-use management planning problem of forest resources. Finally, the results, which were obtained from the calculation of this model, were discussed. The maximal value of the membership function(${\lambda}$) was 0.29, when the timber production and the forest recreation function were optimized at the same time through the fuzzy multiobjective linear programming. The cutting area in each period was 102.7ha, while total cutting area was 410.8ha for 4 periods. During 4 periods $57,904m^3$ will be harvested from this natural recreation forest and at the same time total visitors were estimated to be about 8.6 millions persons.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1980.08a
• /
• pp.44-46
• /
• 1980

파의 에너지 감쇠기구의 관점에서 볼 때 분류손실방식인 유공벽식 방파제 중에서 원형공이 벽 전체에 균일하게 분포되어 있고 구멍 직경에 비해 벽 두께가 얇은 삼중 유공벽형 Caisson의 각 벽에 작용하는 파력에 고나해 이론적 접근과 실험을 통한 실증을 시도해 보았다. 이론적인 방법으로는 토굴구효남의 이론을 응용하였으며 주어진 파랑조건에 대해 각 유공벽 전 후면에 연속방정식과 Bernoulli 방정식을 이용하여, 각 영역별 연속 Potential의 진폭과 위상각에 대한 비선형 12원 연립방정식을 만들었고 Computer를 이용하여 반복법으로 각 속도 Potential을 확정하였다. 이렇게 구한 속도 Potential을 압력방정식에 대입하여 각 벽별 파력을 계산하였으며 동일한 파랑조건하의 실험에서 각 벽별 파력을 측정하여 양자를 서로 비교검토하였다. Bernoulli의 방정식중 에너지 손실항은 의사비선형으로 처리하였다. 유공율조합 0.25-0.3-0.2이고, 판두께가 1cm인 모형의 실험결과, 각 벽별 최대파력치의 특성으로서는 첫때, S-2, S-3등 간벽에 작용하는 파력이 전벽 및 후벽에 비해 두드러지게 작다는 사실과, 둘째 작용파력의 크기 순이 파형경사가 작을 때는 대략 S-4, S-1, S-2, S-3순이고 파형경사가 클 때에는 대략 S-1, S-4, S-2, S-3순이라는 점 등을 들 수 있겠다. 굴구효남이 가정한 f의 치 1.5를 사용하여 계산한 각 벽별 최대파력을 실험치와 비교해 본 결과, 파가 각 유공벽을 통과할 때의 손실수두를 실험에서의 양만큼 fr=1.5를 가정한 수학적 model이 설명해 주지 못한다고 볼 수 있으므로 두가지 방법에 의하여 본 실험에서 사용한 유공판의 손실계수를 근사적으로 추정하여 보았다. 추정한 f를 사용하여 다시금 각 벽별 최대파력을 계산하고 실험치와 비교해 보면 훨씬 서로 근접함을 알 수 있었다. 결국 본 논문의 이론을 사용하면 유공Caisson문제의 전체적인 윤곽 및 각 변수들의 파력에 대한 영향을 파악할 수 있겠다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.1
• /
• pp.155-161
• /
• 2020

In general, optimization problems are difficult to solve simply. The reason is that the given problem is solved as soon as it is simple, but the more complex it is, the very large number of cases. This study is about the optimization of AI neural network. What we are dealing with here is the relief method for constructing AI network. The main topics deal with non-deterministic issues such as the stability and unstability of the overall network state, cost down and energy down. For this one, we discuss associative memory models, that is, a method in which local minimum memory information does not select fake information. The simulated annealing, this is a method of estimating the direction with the lowest possible value and combining it with the previous one to modify it to a lower value. And nonlinear planning problems, it is a method of checking and correcting the input / output by applying the appropriate gradient descent method to minimize the very large number of objective functions. This research suggests a useful approach to relief method as a theoretical approach to solving optimization problems. Therefore, this research will be a good proposal to apply efficiently when constructing a new AI neural network.