• Journal of the Mineralogical Society of Korea
• /
• v.20 no.2 s.52
• /
• pp.115-124
• /
• 2007

Electrum-sulfide mineralization of the Youngbogari mine area occurred in two stages of massive quartz veins that fill the fractures along the fault/shear zones in the Precambrian gneiss. Ore mineralogy is simple, consisting of arsenopyrite $(31.4{\sim}33.4atom.%As)$, pyrite, sphalerite $(4.1{\sim}17.6mole%FeS)$, galena, chalcopyrite, argentite, and electrum. Electrum $(60.3{\sim}87.6atom.%Ag)$ is associated with galena, chalcopyrite and late sphalerite infilling the fractures in quartz and sulfides. Fluid inclusion data show that ore mineralization was formed from $H_2O-CO_2-CH_4-NaCl$ fluids $(X_{CO2+CH4}=0.0\;to\;0.2)$ with low salinities (0 to 10wt.% eq. NaCl) at temperatures between $200^{\circ}\;and\;370^{\circ}C$. Gold-silver mineralization occurred later than the base-metal sulfide deposition, at temperatures near $250^{\circ}C$ and was probably a result of cooling and decreasing sulfur fugacity caused by sulfide precipitation and/or $H_2S$ loss through fluid unmixing.

• Economic and Environmental Geology
• /
• v.35 no.3
• /
• pp.191-201
• /
• 2002

The Gubong gold-silver deposits if gold-silver-bearing hydrothermal massive quartz veins which were filled the fractures along fault shear (NE, NW) zones within Precambrian banded or granitic gneiss of Gyeonggi massif. Ore mineralization of this deposits is contained within a single stage of quartz vein which was formed by multiple episodes of fracturing and healing. Ore minerals are comported mainly of arsenopyrite, pyrite, sphalerite, chalcopyrite, galena with minor amounts of pyrrhotite, marcasite and electrum. The frequency and volume percentages of electrum associated with ore minerals from this deposits are recognized as follows; 44.5% and 54.3% with arsenopyrite, 24.3% and 33.8% with quartz, 12.6% and 0.1% with pyrite, 11.0% and 4.8% with galena, 5.0% and 7.0% with sphalerite and 2.5% and 0.02% with chalcopyrite, respectively. They show irregular (41.6%), subround (34.7%), elongate (17.0%) and granular (6.6%) shapes, respectively. Their grain size ranges from 2 to 150 um, but 90.9 percent of the grains are below 30 um. The chemical composition of electrums ranges from 26.39 to 72.51 Au atomic %. These composition (Au atomic %) on the basis of associated minerals are from 44.97 to 71.75 with arsenopyrite, pyrite, sphalerite and quartz, from 44.37 to 72.51 with quartz, from 35.40 to 41.01 with sphalerite and chalcopyrite, from 26.39 to 54.84 with pyrite, chalcopyrite, quartz and galena, from 28.49 to 53.28 with galena, respectively. We suggest that optimum recovery of gold would be obtained with reference to these results.

• Economic and Environmental Geology
• /
• v.25 no.2
• /
• pp.115-131
• /
• 1992

Late Cretaceous (90.5 Ma), epithermal gold-silver vein mineralization of the Weolseong and Samchang mines in the Sulcheon area, 60 km southeast of Taejeon, can be separated into two distinct stages (I and II) during which fault-related fissures in Precambrian gneiss and Cretaceous (102 Ma) porphyritic granite were filled. Fluid inclusion and mineralogical data suggest that quartz-sulfide-electrum-argentite-forming stage I evolved from initial high temperatures $({\approx}340^{\circ}C})$ to later lower temperatures $({\approx}140^{\circ}C})$ at shallow depths of about 400 to 700 m. Ore fluid salinities were in the range between 0.2 and 6.6 wt. % eq. NaCl. A simple statistic model for fluid-fluid mixing indicates that the mixing ratio (the volumetric ratio between deep hydrothermal fluids and meteoric water) systematically decreased with time. Gold-silver deposition occurred at temperatures of $230{\pm}40^{\circ}C$ mainly as a result of progressive cooling of ore-forming fluids through mixing with less-evolved meteoric waters. Measured and calculated hydrogen and oxygen isotope values of hydrothermal fluids indicate meteoric water dominance, approaching unexchanged meteoric water values. The geologic, mineralogic, and geochemical data from the Weolseong and Samchang mines are similar to those from other Korean epithermal gold-silver vein deposits.

• Economic and Environmental Geology
• /
• v.32 no.6
• /
• pp.561-573
• /
• 1999

Mesothermal gold deposits of the Heungdeok, Daewon and Ilsaeng mines in the Youngdong area occur in fault shear zones in Precambrian metamorphic rocks of central Sobaegsan Massif, Korea, and formed in single stage of massive quartz veins (0.3 to 3 m thick). Ore mineralogy is simple, consisting dominantly of pyrrhotite, sphalerite and galena with subordinate pyrite, chalcopyrite, electrum, tetrahedrite and native bismuth. Fluid inclusion data indicate that hydrothermal mineralization occurred at high temperatures (>240$^{\circ}$ to 400$^{\circ}$C) from $H_{2}O-CO_{2}(-CH_{4})$-NaCI fluids with salinities less than 12 wt. % equiv. NaC!. Fluid inclusions in vein quartz comprise two main types. These are, in decreasing order of abundance, type I (aqueous liquid-rich) and type II (carbonic). Volumetric proportion of the carbonic phase in type II inclusions varies widely in a single quartz grain. Estimated $CH_4$ contents in the carbonic phase of type II inclusions are 2 to 20 mole %. Relationship between homogenization temperature and salinity of fluid inclusions suggests a complex history of fluid evolution, comprising the early fluid's unmixing accompanying $CO_2$ effervescence and later cooling. Estimated pressures of vein filling are at least 2 kbars. The ore mineralization formed from a magmatic fluid with the ${\delta}^{34}S_{{\Sigma}S}$, ${\delta}^{18}O_{water}$ and ${\delta}D_{water}$ values of -2.1 to 2.2$\textperthousand$, 4.7 to 9.3$\textperthousand$ and -63 to -79$\textperthousand$, respectively. This study validates the application of a magmatic model for the genesis of mesothermal gold deposits in Youngdong area.

• The Journal of the Petrological Society of Korea
• /
• v.13 no.2
• /
• pp.81-102
• /
• 2004

The plutonic rocks in Seonsan area are divided into dioritic-syenitic rock, gneissose granite, biotite granite and fine grained biotite granite. These rocks intruded into the Pre-cambrian metamorphic complex and are all covered by the Cretaceous Nakdong formation. According to modal minerals, dioritic-syenitic rock corresponds to quartz monzonite, granodiorite, tonalite fields, whereas all the other plutonic rocks fall in granite field. Petrochemically the dioritic-syenitic rock is lower in SiO$_2$ content, differentiation index and Larsen index than all the other plutonic rocks. About the zircon morphology, dioritic-syenitic rock shows (100) dominant type but other granitic rocks exhibit mixed types between (100) and (110) type. The dioritic-syenitic rock could be crystallized in higher temperature than the other plutonic rocks. The plutonic rocks correspond to calc-alkaline rock series, and belong to I-type granite and mostly magnetite-series in magmatic origin. In plutonic processes, the dioritic-syenitic rock with 5kb vapor pressure could intrude into the metamorphic batement at 17km deep below the surface. Later the gneissose granite with lower 3kb vapor pressure could intrude at 10km deep. Sequentially the biotite granite with 0.7kb could intrude at 2km deep. Finally the fine grained biotite granite with 3kb vapor pressure could intrude at 10km deep.

• The Journal of the Petrological Society of Korea
• /
• v.27 no.4
• /
• pp.223-233
• /
• 2018

In this study, SHRIMP zircon U-Pb dating was performed on deformed granitic rocks in the Sancheong area in the northeastern part of the Jirisan area, southwest of Yeongnam Massif. Until now, these have been known as Precambrian or age-unknown old igneous rocks, but the U-Pb concordant ages obtained from two samples are $237.8{\pm}4.0Ma$ and $230.2{\pm}3.4Ma$, respectively, showing their emplacements in Early to Middle Triassic. These results indicate that the deformed granite was emplaced at about 238~230 Ma. The study area shows the characteristics of ductile deformation with prominent development of foliation, augen structure, and lineation. It is observed that the deformed granites occur as xenoliths within the syenite, indicating that the time of deformation is earlier than the intrusion of the syenite of about 220 Ma. The emplacement and deformation periods of the deformed granite is similar to that of Permo-Triassic granite gneisses distributed in the Gimcheon and Andong areas of the Yeongnam Massif. Taken together, the eastern part of the Yeongnam Massif, extending from the central part to the southwestern part, granite intrusions occurred at about 260-230 Ma, followed by metamorphism-deformation of about 230-220 Ma.

• Economic and Environmental Geology
• /
• v.51 no.6
• /
• pp.543-551
• /
• 2018

The uranium concentrations were determined in groundwater collected from 3,820 community groundwater system (CGS) located in remote rural areas where access to the nationwide water work is not easy. The frequency distribution of uranium concentrations shows a lognormal distribution which is common in most radionuclide surveys. The measured maximum uranium concentration was $1,757.0{\mu}g/L$ with an average of $6.46{\mu}g/L$ and a median of $0.76{\mu}g/L$. When grouping the uranium concentration results of CGS into 10 geological units, the median uranium concentration was high ($0.99-2.05{\mu}g/L$) in three granite areas, and low in sedimentary rocks areas and porous volcanic rocks areas ($0.04-0.50{\mu}g/L$). Of the 3,820 samples, 3.8% are above the guideline value of $30{\mu}g/L$ (WHO, 2011). On the other hand, the exceeding rates of JGRA and PGRA CGS are 8.5% and 7.5%, respectively. Therefore, attention should be paid for the development of new CGS along with the management of the existing CGS in JGRA and PGRA areas.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.689-699
• /
• 2022

The Ssangjeon tungsten deposit is located within the Yeongnam Massif. Within the area a number of hydrothermal quartz veins were formed by narrow open-space filling of parallel and subparallel fractures in the metasedimentary rocks as Wonnam formation, Buncheon granite gneiss, amphibolite and/or pegmatite. Mineral paragenesis can be divided into two stages (stage I, ore-bearing quartz vein; stage II, barren quartz vein) by major tectonic fracturing. Stage I, at which the precipitation of major ore minerals occurred, is further divided into three substages (early, middle and late) with paragenetic time based on minor fractures and discernible mineral assemblages: early, marked by deposition of arsenopyrite with pyrite; middle, characterized by introduction of wolframite and scheelite with Ti-Fe-bearing oxides and base-metal sulfides; late, marked by Bi-sulfides. Fluid inclusion data show that stage I ore mineralization was deposited between initial high temperatures (≥370℃) and later lower temperatures (≈170℃) from H₂O-CO₂-NaCl fluids with salinities between 18.5 to 0.2 equiv. wt. % NaCl of Ssangjeon hydrothermal system. The relationship between salinity and homogenization temperature indicates a complex history of boiling, fluid unmixing (CO₂ effervescence), cooling and dilution via influx of cooler, more dilute meteoric waters over the temperature range ≥370℃ to ≈170℃. Changes in stage I vein mineralogy reflect decreasing temperature and fugacity of sulfur by evolution of the Ssangjeon hydrothermal system with increasing paragenetic time.

• Economic and Environmental Geology
• /
• v.19 no.4
• /
• pp.243-264
• /
• 1986

This work is a metallogeny on gold-silver deposits in South Korea based on the close examination of the author's own data and a broad review of existing literature available. The metallogenic epochs in Korea are temporarily connected with the history of tectonism and igneous activities, and are identified as the Precambrian, Paleozoic, Jurassic to early Cretaceous, late Cretaceous to early Tertiary, and Quaternary epochs, whereas the metallogenic provinces are spatially associated with some of the felsic to intermediate igneous rocks, lacking mineralization related to basic and ultrabasic rocks. The metallogeny on the gold-silver deposits is mostly related to the granitic rocks intrusives. Epigenetic gold-silver mineralization in South Korea ranges in metallogenic epochs from Precambrian through Triassic, Jurassic and Cretaceous to Eocene (?), in genetic types from hypothermal through mesothermal and epithermal quartz-sulfide veins to volcanogenic stockworks, with some disseminated types. Reporting on metallic association from gold without silver, gold-silver, silver-gold, silver without gold, and gold or silver as a by-product from other metallic ores. The most representative genetic types and metal associations of gold-silver deposits are hydrothermal quartz veins associated with the Daebo and Bulgugsa granitic magmatism. The most closely associated paragenetic metallic minerals in gold-silver hydrothermal quartz-sulfide vein type deposits are: copper, lead, zinc, pyrite and arsenopyrite. More than 560 gold-silver mines are plotted in the distribution map grouped within the 10 different metallogenic provinces of South Korea. Specific mineralizations with related mineral association in both sulfides and gangues observed selected from 18 Korean and 8 Japanese Au-Ag deposits. The 7 selected individual gold-silver mines representing specific mineralization types are described in this report.

• Economic and Environmental Geology
• /
• v.28 no.6
• /
• pp.579-585
• /
• 1995

The Samkwang mine is Cretaceous gold-silver-bearing deposits located in the western part of the Ogcheon belt The ore deposits have been emplaced within granite gneiss of the Precambrian age. The Au-Ag deposits are hydrothermal-vein type, characterized by arsenic-, gold- and silver-bearing sulphides, in addition to the principal ore-forming sulphides arsenopyrite, galena, sphalerite, chalcopyrite, pyrite and pyrrhotite. Their proven reserves are 355,000 MT, and grades are 8.4 g Au/t and 13.6 g Ag/t. On the basis of their structural characters, the Au-Ag-bearing quartz veins are classified into three types of ore veins; (1) The Main vein shows $N40^{\circ}-80^{\circ}E$ strike and $55^{\circ}-90^{\circ}SE$ dip, (2) the Sangban vein shows E-W strike and $30^{\circ}-40^{\circ}S$ dip, and (3) the Gukseong vein has $N25^{\circ}-40^{\circ}W$strike and $65^{\circ}-80^{\circ}SW$ dip. The emplacements of the ore veins are closely related to the minimum stress axis $({\sigma}_3)$ during the strike-slip movement of the study area. The ore-bearing veins filled with extension fractures during strike-slip movements were sequentially emplaced as follows: I) When ${\sigma}_1$ operates obliquely to NE-series discontinous surface, the Main fault zone $(F_1)$ developes. 2) During the same time, extension fractures ($T_1$ Gukseong veins) take place. 3) When the fault progress continuously, the existing $T_1$, may be high angle and $T_2$ (Daehung vein) developes continuously. 4) When ${\sigma}_1$ changes to sinistral sense, $T_3$ (basic dyke) occurs. 5) When a reverse fault becomes active, the Sangban vein is branched from the Guksabong vein.