• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.2
• /
• pp.28-33
• /
• 2002

The characteristics of hull-pieces are large quantity, comparatively large piece-size, and different each shape. For the more, in the forming process(including Line-Heating Process) of curved hull pieces, shape checking processes including initial shape measurement and forming shape measurement of the each pieces are needed to achieve a given accuracy. So, the forming process of large curved hull pieces needs efficient measurement and comparison technique to check the shape and ensure the forming-accuracy In this paper, we try to construct integrated S/W, H/W system for efficient measurement and comparison of large curved hull pieces, which can apply to above forming environment.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2007.11a
• /
• pp.570-578
• /
• 2007

선체 외판 부재의 곡 성형 과정은 주로 가열(열간가공)에 의해 수행된다. 이 가열 작업은 작업자의 경험과 지식에 크게 의존하는 매우 어려운 작업이다. 본 논문에서는 선체 외판의 곡 성형을 위한 가열 계획을 자동으로 수립할 수 있는 휴리스틱을 소개한다. 현장 전문가의 지식에 기반한 이 휴리스틱은 크게 가열 선을 생성하는 부분과 외력을 주는 도구를 배치하는 부분으로 구성된다. 가열 선은 대상 부재의 현재 곡면과 설계된 목적곡면과의 비교를 통해 생성되고, 가우스 커널 함수를 통해 스무딩(smoothing)된다. 현장에서는 열간가공 시 의도하지 않은 변형을 막으면서 작업시간을 줄이고자 외력을 이용한다. 외력의 위치와 방향은 가열 선 군집화를 통해 추출된 대표 가열 선을 기준으로 결정된다. 가상의 인공 곡면과 현장의 실제 부재를 대상으로 실험한 결과, 이 휴리스틱이 숙련된 전문가가 수립한 가열 계획과 유사한 가열 계획을 수립할 수 있음을 확인하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.1
• /
• pp.69-75
• /
• 2016

Fabrication of the hull plate demands a lot of man-hour and a high degree of technology. In recent years, commercial shipping orders have been fallen because of intensifying competition with low price of order and labor cost. In order to solve this problem, a countermeasure such as a cost reduction is required. In this study, we are dealing with the method of supplying the forming information of the hull to the production site. We reviewed studies of hull forming that have been proposed so far to develop a method for providing hull forming information. On the basis of given production plans from the production site of shipyard, we discuss how to convert shell plate to production plan. Then, we will discuss the efficiency of the distribution method through the network about the method of hull forming. Thus, we have modified the distribution method which was proposed before. Finally, we will introduce the enhanced method for providing fabrication information of the hull plate to the small and medium-sized shipyards.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.1
• /
• pp.66-74
• /
• 2019

In the field of shipbuilding design, the use of 3D CAD is becoming commonplace, and most of the large shipyards are conducting 3D design. However at the production site, workers are still working on 2D drawings rather than 3D models. This tendency is even worse in small-scale shipyards and block manufacturing shops. Particularly, in a manufacturing shop that is engaged in the outsourcing of blocks, it may not be possible to provide 3D model. However, the demand for 3D models in the production field is steadily increasing. Therefore, it would be helpful if 3D model could be generated from a 2D drawing. In this paper, we propose a method to extract template and unfolded surface shape information from shell template offset drawing using computer vision technology. Also a 3D surface model was reconstructed and visualized from the extracted information. The result of this study is thought to be helpful in the work environment where 3D model information can not be obtained.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.1
• /
• pp.70-76
• /
• 2015

The ship hull is accomplished by assembling various curved surfaces. There are numerous existing methods for ship hull processing, which need certain appropriate processing methods to enable it to be more efficient. The curved hull plates can be divided into convex region and saddle region. It is common to use line heating method to form a saddle region, when it comes to a convex region, it will be triangle heating method to be utilized. A precise analysis for curvature domain is required for the application of proper processing method. There exist various problems on existing calculation methods of curvature domain. Therefore, a more powerful method is demanded to it more accurately. In this study, a method called Dual Contouring is applied to extract curved surfaces, which is able to improve accuracy of extracted area. Based on all above, a best-suited heat processing method should be selected.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.58-58
• /
• 2009

선박의 선체부분인 선수, 선미 등을 이루고 있는 곡형 외판의 제작은 강판을 원하는 형상으로 성형하기 위하여 벤딩롤러 및 유압프레스를 이용한 냉간가공과 산소-프로판가스 화염을 적용한 선상가열, 삼각가열을 이용한 열간가공으로 크게 구분할 수 있다. 선상가열을 이용한 곡면가공의 원리는 가열토치를 이용하여 강판을 가열하면 가열부는 팽창하게 되고 냉각시에는 수축하게 된다. 이 때 두께방향으로의 소성변형으로 인한 수축량의 차이로 인해 굽혀지게 된다. 최근에는 선박이 고기능 및 대형화로 인해 3차원 곡형 외판 형상이 복잡해지고, 강도를 향상시키기 위하여 합금원소(C, Nb, V, Ti)를 첨가하거나 열처리(노말라이징)를 이용한 고장력강재인 중후판의 적용이 증가하고 있다. 이러한 고강도강재를 선상가열공정으로 제작한 곡형 외판재는 가열, 냉각의 열사이클로 인해 취화되어 인성이 저하 될 수 있다. 본 연구에서는 Normalizing 열처리재인 490MPa급 강재를 이용하여, 현장에서 작업자의 미숙련으로 인해 발생 할 수 있는 최대의 가혹한 조건과 재질에 큰 영향을 미치지 않는 범위를 선정하여 선상가열시의 가열, 냉각조건에 따른 강재의 재질특성을 조사하고자 한다. 이를 위해 가열시 가열부위의 정확한 온도 측정에 역점을 두었으며, 각각 다른 선상가열 조건에 따른 시편을 제작하기 위하여 선상가열 실험장치를 제작하였다. 선상가열 실험 결과 최고가열온도 $1300^{\circ}C,\;950^{\circ}C$에서 수냉 조건인 경우 급격한 인성저하 현상이 발생하며 비록 공냉이라 하더라도 결정립 조대화로 인성 저하가 발생하였다. $800^{\circ}C$가열 후 수냉개시온도를 $700^{\circ}C$이하로 수냉한 경우에는 인성 저하 현상이 개선되고 있음을 알 수 있다.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.142-149
• /
• 1996

Pyramid type three roll bending machines are widely used in roll-bending process to produce singly curved plate. In forming singly curved plate, controlling the vertical displacement of the center roller is most important to acquire the shape required and automation system of the process. In this paper roller bending process is modeled as an elastic-plastic phenomenon and analyzed using beam theory and finite element method. In finite element analysis the workpiece is modeled by using beam elements and plane strain elements respectively. Through the analyses vertical center roller displacement is obtained to get constant curvature distribution along arc length. The relationship between center roller displacement and curvature in steady state as well as residual stress and strain along plate thickness direction are calculated through finite element analysis.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.62-70
• /
• 2001

As the ship hull is a compound-curved structure, plate bending process is indispensible. The process includes press bending process for forming major 1st curvature and heating process for forming the rest curvature. Especially the heating process that is above 50 percents of entire bending work is carried out exclusively by skillful workers. Many researches have been made to automate the heating process but most of these are about line heating process and researches for triangle heating process are rare. This study is a fundamental study to develop a efficient analysis method for triangle heating and focused on clarifying the deformation characteristics of plate by triangle heating. In this paper, we carried out heating experiments and analysed the deformation characteristics of plate to explain the deformation characteristics of plates rationally by showing the phase transformed high temperature region. Also we investigated the heating effect on the hull material properties by mechanical tests.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.2
• /
• pp.34-44
• /
• 2002

Approximately 70 percent of shop's hull plate consists of three-dimensional curved shell. Concerning with the research on the automation of plate forming many studies have been carried out for the last decade. The purpose of this study is to develop the simulator of heating on the basis of the reasonable mechanical model representing a heating phenomenon. The beating experiment has been carried out with varying parameters influencing on the results of heating information at the kinematics analysis, simulatorestimate the shape of deformed plate that process along the processing information. When we get the initial shape and the object shape, we calculate the processing information first, using kinematics analysis. In a simulator we estimate deformed shape from the processing information. After this we compare deformed shape and object shape. If the error of deformed shape and object shape is in the proper limits, that information is determined the final processing information. Else we repeat the process changing variable.