• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.947-951
• /
• 1997

Recently, the necessity of the detection of abnormal machining process is being emphasized in order to improve the machining accuracy and reduce the cost in unmanned operating system. The vibration by chatter generated in cutting processes within machine tools is a relative motion between tools and workpieces. So, if the chatter occurs, the surface roughness and accuracy of workpieces will be deteriorate and it leads to the rapid wear of tools. The author intended to use the I /sab/RMS (current of root mean square) of current sigals and the movimg C.V. (coefficient of variation) of each phase for the detection method of chatter.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.851-856
• /
• 1997

This study is on the estimation of the tool temperature for different tool nose radius and cutting conditions in turning. The experiment has been performed in different cutting conditions such as cutting speed, feed rate, and depth of cut for the tool nose radius, 0.4R, 0.8R using SMC workpiece materials. Tool temperature is measured using thermo-couple which is embedded in the insert tip. Using a multiple linear regression method, the tool temperature can be determined as an exponential equation with cutting variables and tool nose diameters for different tool materials. The equations determined in this study show a good correlation for the cutting conditions and can be used for the tool temperature estimation. The result indicates that the tool temperature decreases for ~ncreasing the tool nose radius in general. Also, nose radius hardly influences on the tool temperature compared with cutting speed, feed rate and depth of cut.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.929-934
• /
• 1997

In the present industry, there are necessary to cut not only iron metals but also non-ferrous metals such as aluminum, brass, plastic and wood(Paulownia).therefore it had been made the studies of non-ferrous metals by many scientists. we hope this kind of study will continue. The purpose of this study is to conduct the basic experiment about influencing of the feedrate adjustment and the change of the side rake angle at turning of non-ferrous metals. As the results, the surface roughnesses and Cutting force adjustments were on the decrease with a side-rake angle and feedrate diminution in the case of the plastic, brass, aluminum, and paulownia

• 한국정밀공학회지
• /
• 제9권3호
• /
• pp.117-121
• /
• 1992

There have been many studies on chatter vibration in machining but there seems to be no regulations to decide the commencing point of chatter objectively. The development of an objective method which can estimate and detect chatter commencement is very much in need for automatic manufacturing systems, dynamic performance tests for machine tools, and so on. In this study, an approach for in-process monitoring and for deciding commencing point of the chatter vibration using the frequency band-energy method was proposed. From this method, in-process monitoring system for detection the chatter vibration was developed, and investigated its practical possibility. As a result, it is shown by experiments that the chatter vibtation can be detected accurately. Since the changing pattern of the signal energy in certain frequency band during chattering is seldom affected by the variation of cutting conditions, if adequate pre-measures are taken, this method can be widely used in most machining processes.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.78-85
• /
• 2002

The wavelet transform is a popular tool fer studying intermittent and localized phenomena in signals. In this study the wavelet transform of cutting force signals was conducted for the detection of a tool failure in turning process. We used the Daubechies wavelet analyzing function to detect a sudden change in cutting signal level. A preliminary stepped workpiece which had intentionally a hard condition was cut by the inserted cermet tool and a tool dynamometer obtained cutting force signals. From the results of the wavelet transform, the obtained signals were divided into approximation terms and detailed terms. At tool failure, the approximation signals were suddenly increased and the detailed signals were extremely oscillated just before tool failure.

• 한국정밀공학회지
• /
• 제3권4호
• /
• pp.43-52
• /
• 1986

Experimental results on plastic strain induced in truning operation are presented in this paper. The plastic strain is computed by lagrangian strain using grid method, and metal cutting phenomena are also illustrated by micrograph and distribution figures of plastic strain and microvickers hardness of the machining surface. In the cutting of ductile materials, such as carbon steel, generally, the plastic strain is found to be concentrated near the surface. The amount of plastic strain increases with increasing cutting speed and feed rate. The dustribution of microvickers hardness is greater near the cutting surface and decreases from the machining surface under which its hardness returns to the normal hardness of the material.

• 한국정밀공학회지
• /
• 제3권4호
• /
• pp.30-42
• /
• 1986

On the analysis of cutting mechanics in orthogonal cutting, each cutting force component can be predicted. By adding the flank face wear term to the prediction equation for cutting force components, complete equations are obtained. Using these equations, it is shown that cutting force components are increased linearly as flank face wear land is developed, in theory and experiment. By making non-dimensional term ie. Fv/Fc, the width of variation of output signal Fv/Fc is greately decreased compared with each cutting force component as cutting condition is varied. Among these conditions, the variation of chip width in the range of more than 1mm and that of cutting velocity have little effect on the output signal Fv/Fc, that of Flank face werr land can be detected without difficulty.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1542-1551
• /
• 1990

본 연구에서는 직경오차를 최종 다듬질 가공 직전에 선반의 주축 정지 상태에 서 공구대에 부착시킨 전기마이크로미터로 측정하는 방법을 이용하여, 어떠한 공작물 형상에 대해서도 오차 측정경로를 NC 프로그램으로 자동 생성하고 이를 이용하여 직경 오차를 측정, 보정하는 알고리즘을 제안함과 동시에 수정된 최종 다듬질 가공용 NC프 로그램을 자동적으로 생성하는 시스템을 개발하고자 한다.

• 한국정밀공학회지
• /
• 제9권3호
• /
• pp.53-60
• /
• 1992

This paper deals with developing an Expert system for tool selection using knowledge base system approach, and its application. For the sake of building of knowledge base, the information from process through sensor, tool handbook and interview with expert are referrenced and managed. The system developed shows good application flexibility in providing the actual cutting process with the selection of tool(insert, holder) and cutting conditions(feed, speed, rake type, and so on), is found as a useful system for real-time machining process. The Expert system for tool selection is written in TURBO PROLOG ver. 2.0 for inference engine capability, and can be run in interactive mode for user friendliness. In order to apply the system developed in actual cutting process, more parameters should be considered and scrutinized, and the system should be further extended in modular basis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.581-584
• /
• 2003

The austenitic STS 304 stainless steel was turned to clarify the effects of tool geometry on the tool wear. The wear of TiN-TiCN-TiC-TiAlN coated tungsten carbide tool was the smallest, exhibiting larger wear in the order of Si-Al-O-N ceramic, TiN coated tungsten carbide, TiN-TiCN-TiN coated tungsten carbide, TiC-TiN cermet and M20 tungsten carbide tools at the same cutting conditions. The S-type tool of M20 with large approach angle showed the longest tool life of all tools used in this tests due to preventing the groove wear of the side cutting edge. The wear of the S-type tool with the rake angle of 15$^{\circ}$became smaller than with that of -5$^{\circ}$, but the tool with the nose radius of 0.8mm did not perform much better with increasing the rake angle.