• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1120-1126
• /
• 2002

Machining characteristics of tool steels manufactured by electro slag casting process has been investigated in this study. For the estimation of machinability, turning and drilling tests are carried out. The chip shapes at various velocities are investigated for the comparison of turning workabilities of tool steels because the chip shapes reflect characteristics of cutting resistance. In case of drilling test, feed motor currents measured by a hall sensor are used as a measure for the drilling resistance. The machining characteristics of the tool steels are strongly correlated with tensile properties, such as tensile strength, hardness, and ductility. In case of turning workability, it was found to be favoured by the higher tensile strength, while the opposite is true far the drilling workability. The electro-slag casted materials show better turning workability in the viewpoint of chip shapes and, the quenching-tempered electro-slag casted material has relatively better drilling machinability than that of the annealed one.

• 한국정밀공학회지
• /
• 제26권5호
• /
• pp.48-56
• /
• 2009

In this paper, laser-assisted machining(LAM) has been employed to machine hot isostatically pressed (HIPed) Si3N4 work pieces. Due to little residual flaws and porosity, HIPed $Si_3N_4$ work pieces are more difficult to machine compared to normally sintered $Si_3N_4$ workpieces. In LAM, the intense energy of laser was used to enhance machinability by locally heating the workpiece and thus reducing yield strength. In experiments, the laser power ranges from 200W to 800W and the diameter of work pieces is 16mm. While machining, the surface temperature was kept nearly constant by laser heating except for a short period of rise time of max. 58 seconds. Results showed as feed rate increases the surface temperature of $Si_3N_4$ workpieces decreases slightly, whereas the effect of depth of cut is disregardable. With a laser power of 800W, achievable maximal depth of cut as 0.7mm and feed rate was 0.03mm/rev.

• Journal of Welding and Joining
• /
• 제28권4호
• /
• pp.61-66
• /
• 2010

Silicon nitride is widely used as an engineering ceramics because it has high strength, abrasion resistance and corrosion resistance even at high temperature. However, machining of silicon nitride is difficult due to its high hardness and brittleness. Laser assisted machining(LAM) allows effective cutting using CBN tool by locally heating the cutting part to the softening temperature of YSiAlON using the laser beam. The effect of preheating depending on process parameters were studied to find out the oxidation mechanism. If silicon nitride is sufficiently preheated, the surface is oxidized and $N_2$ gas is formed and escapes from the material, thereby making the cutting process more advantageous. During laser preheating process before machining, high temperature results in strong oxidation which makes the bloating, silicate layers and micro cracks. Using the results of these experiments, preheating characteristics and oxidation behavior were found out.

• 대한기계학회논문집A
• /
• 제36권10호
• /
• pp.1189-1193
• /
• 2012

본 연구는 초소형 광학 시스템을 구현할 수 있는 설계 및 제작의 방법론을 제시하고자 한다. 초소형 광학계에서는 조명 및 결상 광학소자의 성능과 소형화가 조광면의 균질도와 결상 된 이미지의 선명도에 중요한 영향을 미치게 된다. 본 연구에서는 얇은 두께로 실효 광도를 배가시키기 위한 초박형의 LED 빔조형 렌즈를 설계 제작하였다. 상기 렌즈는 중앙부의 비구면렌즈와 외각의 전반사 프레넬 가장자리 부로 구성되어 있다. 설계된 LED 빔조형 렌즈(직경 4.7 mm, 두께 0.6 mm)는 다이아몬드 선삭으로 중앙 비구면부의 전반사(TIR) 가장자리가 정밀하게 가공되었으며, LED 의 빔각을 150 도에서 17.5 도로 축소 시켰다. 다른 광학소자들 마이크로 프리즘, 결상광학용 프레넬 렌즈, 광가이드는 다양한 마이크로 나노 크기의 제조공정으로 일체형으로 성형되었다. 시작품으로 제작된 초소형 광학계($6.8{\times}2.2{\times}2.5mm$)는 마이크로 패턴을 결상의 가능성을 보여주었고, 지문인식용 초소형광학계로서의 성능을 검증하였다.