• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.41-42
• /
• 2019

해양공간의 효율적인 활용과 해상사고 예방을 위하여 해상교통 현황 파악이 필요하다. 이를 위해서는 해상에서 운항하는 선박에 대한 면밀한 모니터링이 선행 되어야한다. 때문에 본 연구에서는 선박자동식별장치(Automatic Identification System, AIS)와 선박패스(V-Pass)를 활용하는 기존 모니터링 방법에서 나아가, 위성 자료를 활용한 연안 선박감시 방법을 해상교통관제(Vessel Traffic Service, VTS) 센터에서 활용하기 위한 방안을 제안한다. 위성 자료는 광범위한 영역에 대하여 다양한 정보를 획득할 수 있는 장점을 지니므로, 부산항 연안에서 수집한 AIS 데이터와 함께 딥 러닝 기반 선박 탐지 및 분류 모델에 활용함으로써, 보다 개선된 모니터링을 기대할 수 있다. 이를 활용하여 미식별 선박들의 출현 위치를 분석하고 나아가 선박의 종류를 예측함으로써, 상세한 해상교통 현황 파악 및 예측을 기대할 수 있다. 향후에는 선박의 종류 뿐 아니라 각 선박의 해상활동을 분석함으로써, 보다 체계적이고 실용적인 해양공간활용 계획수립에 도움이 될 수 있도록 개선할 계획이다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.292-297
• /
• 2015

In this paper, we reported the bypass unit for ship area networks in order to detour the communication failure regions and poor communication links. The device was composed of three parts of circuits for power cut-off, protection, and coupling transformer. Since the coupling transformer exerts a dominant influence on the performance of the by-pass unit, we have tried to find the optimal magnetic core materials and its dimensions. The prototype was passed through the performance test of insertion loss, temperature, and vibration characteristics. The insertion loss was around -2 dB in the range of 90 kHz ~ 30 MHz and the average communication speed was 59.2 Mbps in the laboratory. A pilot communication test using the developed tool was conducted in the training ship of the Korea Maritime and Ocean University. As a results of experiment, we showed that the wired communication among the heterogeneous-links in the ship area networks are possible by the bypass unit and also a high speed communication services are available in ~ Mbps by using a power-line.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.52-52
• /
• 2010

선박건조에 있어서 대형 블록의 조립이 이루어지는 선행 탑재 및 탑재 단계에서 Tank Top과 Upper Deck의 V 개선 용접은 FCAW+SAW의 복합용접이 실시되고 있다. 그러나 가장 범용적 모재 두께인 18~20t의 경우 SAW 시공에만 약 5~6Pass가 소요됨으로써 다급한 진수 일정에 많은 지장을 초래하고 있다. 또한 능률 향상을 목적으로 용착량 증가효과를 얻기 위해 철분말이나 절선와이어를 개선면내에 충진하고 용접을 수행하나 획기적인 용접능률을 기대하기 어렵고 용접사 기량에 따라 용접 결함이 발생될 수 있다. 이에 따라 용접패스 수를 줄이고 결함 발생이 없는 용접기법 개발이 절실히 필요하였다. 이를 위해 매우 간단하고 효율적인 위빙장치를 제작하여 선탑/탑재 아래보기 용접이음에 1~2패스의 SAW 용접법을 개발하여 용접생산성은 물론 용접품질까지 획기적으로 향상시키는 기술 개발을 완료하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.518-521
• /
• 2016

Korea is surrounded on three sides by the sea, through the maritime transportation accounts for close to 90% share in the total cargo volume. In addition, there are amount of small and medium-sized fishing vessels registered. These days, a number of maritime accidents caused many casualties and having an adverse effect on the marine environment. Therefore, there is a need for a maritime traffic control has been increasing. Information about the ship is divided into AIS information for VTS, Port Management Information System (Port-MIS) operated by the Port and vessels pass (VPASS) that are installed on fishing. However, there is a problem that is not achieved the information exchanged between each other. That is, information on the vessel are stored in diverse inefficient in the management, operation and utilization. This paper discusses the ways to efficiently manage and integrate vessels information for VTS, and proposes the method for implementation and application.

• Journal of Navigation and Port Research
• /
• v.45 no.4
• /
• pp.204-211
• /
• 2021

The Maritime Domain Awareness system is a component that is necessary to enhance the awareness of all situations occurring at sea in relation to security, safety, economy, and the environment. To establish a marine situation recognition system that is currently being introduced in major maritime countries after approval by the International Maritime Organization's Maritime Safety Committee in 2010, operational measures should be established. For the purpose of establishing a technological foundation for the efficient construction of a Korean maritime situation recognition system, this study analyzed the status of each system (RADAR, VHF, and V-PASS, etc.) and proposed the application of data and communication standards.

• Journal of Navigation and Port Research
• /
• v.42 no.4
• /
• pp.245-252
• /
• 2018

A method of transmitting an alert signal in case of man-overboard (MOB) systems in a small fishing vessel navigating within coastal area is being operated as VHF-DSC equipment via a distress alert button and V-P ass Equipment via alert button or beacon separation. However, a small fishing vessel with a couple of crews on board is an inappropriate way to alert a man-overboard condition. However, internationally, MOB equipment using VHF-DSC, AIS, and Bluetooth technologies is used to transmit alert signals directly to the mother ship and other radio stations. In order to analyze the performance and technology of the MOB equipment operating in foreign countries, it was confirmed that the alarm signal can be received within a maximum of one nautical mile when the MOB device is on the water surface. An MOB device that meets domestic conditions needs to send an alarm signal to a station within the VHF communication range. However, in order to reduce the false alert signal, it is most appropriate to operate the VHF-DSC radio equipment installed on the ship remotely. Analysis of various technologies connecting the MOB and the VHF-DSC revealed that the Bluetooth system has advantages such as device miniaturization. When an emergency signal is transmitted from the MOB device, it can be received by a dedicated receiver and recognized through an external input terminal of the VHF-DSC equipment generating its own alarm. If the emergency situation cannot be processed at the mother ship, a distress alert is sent to all radio stations via VHF-DSC for response under emergencies faced by small fishing vessels.