• Journal of Advanced Marine Engineering and Technology
• /
• 제19권2호
• /
• pp.1-9
• /
• 1995

The processing paper has devoted to the theory of the flow equations, the basic derivative procedure, the meaning of a valve flow coefficient $C_v$, the valve Reynolds R$R_{ev}$ and its application for liquid control valves, which applicable under the condition of a non-critical flow and the case of piping geometry factor $F_p$=1.0. However there is no information on the effects of fittings, a critical flow and the flow resistance coefficient of a valve equivalent to that of pipe which is conveniently used in the piping design. Since the piping systems of plants or ships generally contain various fittings such as expanders and reducers due to different size between pipes and valves and there may occur a critical flow, that a mass flowrate is maintained to be constant, due to the pressure drop in a piping when a liquid is initially maintainder ar a saturated temperature or at nearby corresponding to upstream pressure, system designer should have a knowledge of the effect to flow due to fittings and the critical flow phenomenon of a liquid. This study is performed to inform system designers with the critical flow phenomenon of a liquid, a valve resistance coefficient, a valve geometry factor and their applications.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권4호
• /
• pp.532-539
• /
• 2010

유무선 통신기술이 접목된 정보통신 및 제어기술을 이용하는 첨단해양교통시설은 안전한 해양교통 환경을 보장할 수 있는 혁신적인 교통시설이다. 표준화를 기반으로 개발되어진 기술을 통합한 해양교통시설은 항로표지 시스템의 관리와 모니터링 분야에 그 응용기반이 확대되어져 가고 있다. 이러한 해양교통 환경적 변화를 고려하여 해양교통시설에 대한 현황을 파악하고, 해양교통시설 관리시스템 통합의 타당성을 확인하였고, 통합을 구현하기 위한 최적의 방안 및 기존 시스템과의 연계를 통한통합 방안을 제시하였다.

• 동력기계공학회지
• /
• 제13권5호
• /
• pp.18-24
• /
• 2009

This paper shows the result of development about the revolution system of azimuth thruster which of power is less than 250kW for small ship. Advanced Azimuth revolution system can revolve propeller and rudder from 360 degree so that this system for vessel maneuvering can be excellent of propulsion effectively. Fluid power control system for azimuth thruster is designed with PID control system by using CEMTool/SIMTool program. And the actuator used for servo valve can control rudder angle, pressure and direction. The first, We had a test for the angle control of revolution system. The result of angle control confirmed that it has the good efficiency from experiment result of time input degree $30^{\circ}$, $90^{\circ}$ and $180^{\circ}$. The second, We had to a test for the pressure characteristic of hydraulic motor. As a result, We confirmed the maximum pressure 3.5MPa and steady state 0.7MPa nom experiment result of time input degree $30^{\circ}$. In this paper, it is identified the pressure characteristic of hydraulic motor and angle control for azimuth thruster by AMESim, and it has been confirmed the usefulness of AMEsim modeling was verified by comparison between AMESim simulation results and experiments results.

• 한국가시화정보학회지
• /
• 제9권1호
• /
• pp.20-28
• /
• 2011

An experimental assessment has been made of the drag reducing efficiency of the outer-layer vertical blades, which were first devised by Hutchins. The drag reduction efficiency of the blades was reported to reach as much as 30%. However, the drag reduction efficiency was quantified only in terms of the reduction in the local skin-friction coefficient. In the present study, a series of drag force measurements in towing tank has been performed toward the assessments of the total drag reduction efficiency of the outer-layer vertical blades. A maximum 9.6% of reduction of total drag was achieved. The scale of blade geometry is found to be weakly correlated with outer variable of boundary layer. In addition, detailed flow field measurements have been performed using 2-D time resolved PIV with a view to enabling the identification of drag reduction mechanism.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권4호
• /
• pp.667-674
• /
• 2004

This thesis is about the Impressed Current Cathodic Protection (ICCP) control and monitoring system. which brings protection against the corrosion of the ship's hull in the sea environments. The ICCP system is composed of a power supply. anode. reference electrode and controller. AC sources from the ship's generator are converted to DC sources in terms of power supply, and a protection current is sent to ship's hull though anode. The controller fully senses whether or not the detected potential is within a range of protection of ship's hull and then it is automatically controlled to increase or decrease the amount of protective current to be sent to the anode. The monitoring system with RS 232/485 communication is also studied in order to check the normal state of the system at a long period. because an operator does not always watch over this system and thus the system cannot operate well because of his or her negligent management. Since the vessel always navigates in the sea. an characteristics experiment of the ICCP system is conducted by introducing various corrosive environmental factors such as velocity, resistivity, dissolved oxygen, PH, temperature and contamination degree. These results must be referred to when the ICCP system is set up. In short. the ICCP is a multi-system for use on ships and on land structures because it includes a safety device. It is suggested that this system can accomodate a ship's automation and will be very useful.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권8호
• /
• pp.1135-1144
• /
• 2010

유무선 통신기술이 접목된 정보통신 및 제어기술을 이용하는 첨단해양교통시설은 안전한 해양교통환경을 보장할 수 있는 혁신적인 해양교통시설이다. 표준화를 기반으로 개발되어진 기술들을 통합한 해양교통시설은 항로표지 시스템의 관리와 원격 모니터링 분야에 그 응용기반이 확대되어져 가고 있다. 이러한 해양교통시설의 환경적 변화를 고려하여 시스템 독립성, 유연성, 확장성 등을 제공하는 해양교통시설 통합관리 시스템에서의 미들웨어 개념을 정의하고, 미들웨어에 적용 가능한 기술들을 조사하였으며 이를 바탕으로 하여 소프트웨어 구조와 인터페이스를 구성하고 그 구현 방안을 연구하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권5호
• /
• pp.565-572
• /
• 2002

The design concept of diesel engines for sea-going ships has been directed to Low-speed/Long-Stroke type to improve the efficiencies of combustion and propelling. But time-delay inevitable at low speed gives much difficulties for governors to control the engine speed because they would be apt to go into unstable region especially when operating at low speed. The purpose of this paper is to study the problem of how the governor gain can be calculated dynamically in accordance with the valiance of engine speed to locate the engine still on the properly stable condition. In this study, the property of diesel engine was described as composed of combustion element including dead time and rotating element, and the ultimate gain for the speed control system to be located on the condition of stability limit was proposed based on the frequency characteristics. And the target gains with optimized stability also were proposed by giving proper margin to these ultimate conditions. The results were applied to a model system and the availability was confirmed to be satisfactory.

• 수산해양교육연구
• /
• 제11권2호
• /
• pp.184-202
• /
• 1999

The roll damping characteristics of the three models of a small fishing(3 ton class fishing vessel), such as the bare hull, hull with bilge keels, and hull with bilge keels and a central wing are investigated by the free roll and head waves tests in calm water in a towing tank with the various forward speeds, initial angles and OG's. The experimental results are compared with the numerical results of mathematical modelings by the energy method for these three models and the energy dissipation patterns are also compared. And the wave length variations are also included. The experimental results are compared with the numerical results of mathematical modelings by the energy method for these three models and the energy dissipation patterns are also compared. The roll damping moment of the models is increased for zero speed cases, but as the speed increases, the effect of the waves on the roll damping of the models with the additional devices is negligible due to the much increased damping caused by the lift increase.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.2109-2112
• /
• 2007

독도는 울릉도에서도 동남쪽으로 약 87.4km 떨어져 외해의 영향을 많이 받고 있는 지역이지만 방파제 등 외곽시설이 전무하여 평상파랑에도 접안이 어려운 경우가 많아서 독도 관광자원 활용도 및 편의시설 제공면에서 많은 어려움이 있다. 이에 본 연구에서는 독도 접안시설의 전면에 최근 국내에 본격적으로 도입되고 있는 부방파제(floating breakwater)를 설치할 경우 고정식 방파제 설치에 따른 문제점을 충분히 개선할 수 있다고 판단하여, 부방파제 설치에 따른 기술적인 타당성과 부두 이용률 개선효과 등을 연구 하였다. 독도의 접안시설은 해역이 동도와 서도에 의해 북쪽은 일부 차폐되고 남쪽은 직접 노출되어 있는 지리적 특성이 있어 주 파향인 남쪽계열의 8개 파향(SE, SSE, S, SW, SSW, WSW, W, WNW)의 평상파 제어가 가능하도록 방파제를 배치하였고, 이에 따른 부두 이용률 검토결과 부방파제를 설치할 경우 남쪽계열 파랑에 대하여 현상태에 비하여 부두 이용률이 대략 2배정도 증가되는 것으로 나타났으며, 부방파제 계류시스템의 안정에 대해서도 부체에 영향을 주는 외력에 대하여 계류체인의 길이와 Anchor Block 자중의 규모를 적당히 조정하면 충분히 안정한 것으로 검토되었다.

• 한국주조공학회지
• /
• 제28권2호
• /
• pp.74-78
• /
• 2008

An integrated riser heating equipment has been developed to control shrinkage defects originated from casting of a marine propeller. The integrated riser heating equipment is composed of up/down moving parts, heating power source parts and an integrated controller. Heat capacity putting into the riser was calculated quantitatively on the base of a heat transfer analysis, which consisted of the establishment of heating model and the theoretical analysis for heat transfer. The riser heating equipment was evaluated through arc heating and electro-slag heating method. With the results, the arc type heating method was selected by considering high thermal efficiency, inexpensive cost, and convenient workship. This equipment improves the quality of a propeller casting and the poor working environment.