• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.81-82
• /
• 2021

선박은 건조 후 선주에게 인도되기 전에 해상시운전을 하게 된다. 해상 시운전은 통상 안벽에서 수행 가능한 기기류를 테스트 한 후 해상에서 실시하는 것으로 메인 엔진의 출력, 발전기를 포함한 각종 보조기계의 작동상태, 선박의 조종성능과 속력 테스트, 항해 통신장비 테스트, 양묘기테스트 등이 있으며 이외에 선종에 따른 추가 테스트 또는 선주에 의하여 요구하는 특별한 테스트를 하기도 한다. 본 연구는 해상 시운전의 주요 테스트 내용 중 선박조종성능에 관하여 분석하고, 실제 선박을 운항하는 항해사에게 필요한 주요 정보를 식별하고자 하는 기초연구로 진행되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.929-935
• /
• 2014

This paper is study on the pressure monitoring system(PMS) for ship's engine performance analysis( SEPA) based on web, with high speed and accuracy. This system is composed of pressure sensor, monitoring module with multi channel A/D converter, TCP/IP and satellite internet communication system. Existing domestic products measure cylinder pressure when piston of first explosive cylinder reached TDC(the top dead center) point and then measure next cylinder pressure manually each angle divided by a constant rotating interval. But presented system monitors in the local and web computer, using pressure information transmitted from pressure sensor installed on each engine. In this system, it is possible to increase the accuracy of the engine performance analysis because not only each TDC points but cylinder pressures synchronized with the TDC points could be measured in real time, accurately. And therefore, it may be used in a various diagnosis of main engines, such as deviations of each cylinder maximum pressures(Pmax) and the TDC firing positions and combustion conditions.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.234-235
• /
• 2011

본 논문에서는 직렬형 하이브리드 전기추진 시스템을 탑재한 선박에서 엔진 연료절감 및 동적 운항성능 개선을 위한 에너지 저장장치의 도입 필요성과 운용 방안을 제안하였다. 수MW급 전기추진 선박을 대상 모델로 하여 엔진-발전기 시스템의 전력사용 패턴을 분석하였고, 제안한 시스템의 효용성을 시뮬레이션을 통해 검증하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.849-854
• /
• 2013

Many researches on green ship with increasing on economics, efficiency and convenience have been carried out consistently. One of them is development of diesel engines with electronic control. While small duty one for automobiles had been adopted mainly already, disseminating heavy duty one for ships has trouble due to safety and reliability. In order to solve these problem in this study, performance of electronic control and cam type engine installed in parallel on training ship HANBADA of korea maritime university was analyzed and compared. It is certain that specific fuel oil consumption of the electronic control type is lower than cam type and excellent at lower engine load, especially. And the electronic control type shows more effective characteristic at sea trial on specific fuel oil consumption.

• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.153-160
• /
• 2010

Simulation visualization technology is an important constituent through which users directly interact with simulators. Simulator users have a needs for more fast, realistic and intuitive visualization. Though hardware-related performances such as computing power and visual equipment have been grown, the limits have existed in graphics rendering engines generally used in marine simulator up to now. This paper has focused on the review of graphic rendering engines available for simulation visualization. We had deduced system requirements for visualization of ship handling simulation, had surveyed graphic rendering engines as commercial and open source, and analyzed strengths and weakness of them. The feasibility study for simulation visualization of tug-barge transportation with an open source graphics rendering engine(OGRE3D) has been demonstrated.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.38-39
• /
• 2009

Visual simulation technology is one of important constituents experienced directly by simulator users. Simulator users have a needs for more fast, realistic and intuitive visualization. Though hardwares such as computing power and visual equipment have been grown, the limits have been indicated in graphic rendering engine generally used in marine simulator up to now. This paper has focused on the review of applicability about graphic rendering engines for visual simulation. We had derived system requirements in visualization of tug-barge simulation, had surveyed graphic rendering engines as commercial and open source, and analyzed strengths and weakness of them.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.483-488
• /
• 2015

This paper implements a long-term monitoring system (LMS) for ship's engine performance analysis (SEPA) based on the web, for the purpose of the communication speed and engine maintenance. This system is composed of a simulator, monitoring module with a multi channel A/D converter, monitoring computer, network attached storage (NAS), RS485 serial and wireless internet communication system. The existing products monitor the information transmitted from pressure sensors installed in the upper parts of each of engines in the local or web computer, but have a delay in the communication speed and errors in long-term monitoring due to the large volume of sampling pressure data. To improve these problems, the monitoring computer saves the sampling pressure data received from the pressure sensors in NAS, monitors the long-term sampling data generated by the sectional down sampling method on a local computer, and transmits them to the web for long-term monitoring. Because this method has one tenth of the original sampling data, it will use memory with small capacity, save communication cost, monitor the long-term sampling data for 30 days, and as a result, make a great contribution to engine maintenance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.233-239
• /
• 2014

The accurate engine output is basically one of important factors for the analysis of engine performance. Nowadays in-cylinder pressure analyzer in internal combustion engine is also an indispensable tool for engine research and development, environment regulation and maintenance of engine. The combustion analysis is desperately needed in order to induce a correct judgment on the condition of the engine and suggest the specific ways to improvement as well as the correct engine output. And these tool is advantageous to reduce fuel consumption and maintenance of the engine. In this study, using the developed measuring kit, combustion analysis of marine generator engine which was adapted as test engine was carried out. It was verified that the good operation condition of the engine as well as contributing to fuel savings by checking and readjusting accurately the irregular combustion of the test engine were accomplished. From the results all above, it was recognized that the measuring kit by new method for engine output was developed and verified for its utilities.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.4
• /
• pp.459-466
• /
• 2012

The accurate engine output is basically one of important factors for the analysis of engine performance. Nowadays in-cylinder pressure analysis in internal combustion engine is also an indispensable tool for engine research and development, environment regulation and maintenance of engine. Here, it is essential more than anything else to find the correct TDC(Top Dead Center) position for the accuracy of engine output for diesel engine. Therefore this study is to analyze affecting factors to TDC position in 2-stroke large low speed engine and to suggest new method for determining correct TDC position. In the previous paper, it was mentioned that the accuracy of engine output is influenced by the determination of exact TDC position, and that 'Angle based sampling' method is better than 'Time based sampling' method in terms of precision. It was confirmed that there is 'Loss of angle', which is a difference between compression pressure peak and real TDC caused by heat loss and blow by of gas leakage. Consequently we invented new method, called "An improved method of time based sampling", which can obtain the correct engine output. The results by this method with compensating loss of angle was shown the same result by the 'Angle based sampling' method in encoder setting cylinder. This study is to suggest the new measuring method of exact engine output, and to examnine the reliance on the outcome.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.497-504
• /
• 2023

In this study, Selective catalytic reduction (SCR) + Diesel particulate filter (DPF) system was installed on a ship with a low-speed engine to conduct the on-board test. The target ship (2,881 gross tons, rated power 1,470 kW@240 rpm ×1) is a general cargo ship sailing in the coastal area. Drawing development, approvals and temporary survey of the ship were performed for the installation of the after-treatment system. For performance evaluation, the gaseous emission analyzer was used according to the NOx technical code and ISO-8178 method of measurement. The particulate matter analyzer used a smoke meter to measure black carbon, as discussed by the International Maritime Organization (IMO). Tests were conducted using MGO (0.043%) and LSFO (0.42%) fuels according to the sulfur content. The test conditions were selected by considering the engine rpm (130, 160 and 180). Gaseous emission and particulate matter (smoke) were measured according to the test conditions to confirm the reduction efficiency of the after treatment system. The results of NOx emission and particulate matter (smoke) revealed that reduction efficiency was more than 90%. The exhaust pressure met the allowable back pressure (less than 50 mbar). This study confirms the importance of the on-board test and the potential of SCR + DPF systems as a response technology for reducing nitrogen oxides and particulate matter.