• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2007.10a
• /
• pp.227-230
• /
• 2007

대규모 노천광산의 개발과정에서 배수 및 운반 설계는 매우 중요한 작업 요소이며, 그 결과에 따라 채광 효율성과 광산 운영비용이 크게 달라질 수 있다. 본 연구에서는GIS를 이용하여 노천광산의 배수 및 운반 시스템을 최적화할 수 있는 새로운 채굴적 설계 방안을 제시하였다. 대부분의 노천광산에서 빈번하게 수행되는 지상 지형측량 결과를 이용하여 수치표고모델을 생성하였고, 수계분석 알고리즘을 적용하여 강우시 노천광산 배수 시스템의 특성을 분석하였다. 또한, 최적경로 분석 알고리즘과 다중 의사결정 기법을 접목하여 폐석 트럭의 최적 운반경로를 분석하고, 트럭 운반 시스템의 효율성을 평가할 수 있는 방법을 제시하였다. 인도네시아 파시르 석탄 노천광산을 대상으로 적용시험을 수행한 결과, 배수 및 운반 설계 과정에서 GIS가 효과적으로 활용될 수 있음을 확인할 수 있었다.

• Tunnel and Underground Space
• /
• v.24 no.1
• /
• pp.11-20
• /
• 2014

This study analyzed the optimal routes of auxiliary vehicles in an open-pit mine that need to traverse the entire mine through many working points. Unlike previous studies which usually used the Dijkstra's algorithm, this study utilized a heuristic algorithm for the Traveling Salesman Problem(TSP). Thus, the optimal routes of auxiliary vehicles could be determined by considering the visiting order of multiple working points. A case study at the Pasir open-pit coal mine, Indonesia was conducted to analyze the travel route of an auxiliary vehicle that monitors the working condition by traversing the entire mine without stopping. As a result, we could know that the heuristic TSP algorithm is more efficient than intuitive judgment in determining the optimal travel route; 20 minutes can be shortened when the auxiliary vehicle traverses the entire mine through 25 working points according to the route determined by the heuristic TSP algorithm. It is expected that the results of this study can be utilized as a basis to set the direction of future research for the system optimization of auxiliary vehicles in open-pit mines.

• Tunnel and Underground Space
• /
• v.18 no.6
• /
• pp.447-456
• /
• 2008

Open-pit mine slope design must be carried out from the economical efficiency and stability point of view. The overall slope angle is the primary design variable because of limited support or reinforce options available. In this study, the slope angle and critical slope height of large coal mine located in Pasir, Kalimantan, Indonesia were determined from safety point of view. Failure time prediction based on the monitored displacement using inverse velocity was also conducted to make up fir the uncertainty of the slope design. From the study, critical slope height was calculated as $353{\sim}438m$ under safety factor guideline (SF>1.5) and $30^{\circ}$ overall slope angle but loom is recommended as a critical slope height considering the results of sensitivity analysis of strength parameters. The results of inverse velocity analysis also showed good agreement with field slope cases. Therefore, failure of unstable slope can be roughly detected before real slope failure.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2007.10a
• /
• pp.409-418
• /
• 2007

• The Journal of Engineering Geology
• /
• v.20 no.3
• /
• pp.243-255
• /
• 2010

The slope design of an open-pit mine must consider economical efficiency and stability. Thus, the overall slope angle is the principal factor because of limited support or reinforcement options available in such a setting. In this study, slope displacement, as monitored by a GPS system, was analyzed for a coal mine at Pasir, Indonesia. Predictions of failure time by inverse velocity analysis showed good agreement with field observations. Therefore, the failure time of an unstable slope can be roughly estimated prior to failure. A GIS model that combines fuzzy theory and the analytical hierarchy process (AHP) was developed to assess slope instability in open-pit coal mines. This model simultaneously considers seven factors that influence the instability of open-pit slopes (i.e., overall slope gradient, slope height, surface flows, excavation plan, tension cracks, faults, and water body). Application of the proposed method to an open-pit coal mine revealed an enhanced prediction accuracy of failure time and failure site compared with existing methods.

• Tunnel and Underground Space
• /
• v.23 no.5
• /
• pp.353-361
• /
• 2013

Previous studies for analyzing optimal haulage routes of dump trucks in open pit mines mostly used raster data. However, the raster data has several problems in performing optimal route analyses: (1) the jagged appearance of haulage roads according the cell resolution often causes overestimation of the travel cost; (2) it difficult to trace the topological relationships among haulage roads. These problems can be eliminated by using vector network data, however a new method is required to reflect the performance characteristics of a dump truck according to terrain gradient changes. This study presents a new method to create vector network data with the consideration of terrain gradient for analyzing optimal haulage routes of dump trucks in open pit mines. It consists of four procedures: (a) creating digital elevation models, (b) digitizing haulage road networks, (c) calculating the terrain gradient of haulage roads, and (d) calculating the average speed and travel time of a dump truck along haulage roads. A simple case study at the Roto South pit in the Pasir open pit coal mine, Indonesia is also presented to provide proof that the proposed method is easily compatible to ArcGIS Network Analyst software and is effective in finding optimal haulage routes of dump trucks with considering terrain gradient in open pit mines.

• Tunnel and Underground Space
• /
• v.19 no.3
• /
• pp.248-260
• /
• 2009

With regard to oversea mineral resources development, recent trend has been changed from a simple capital investment to a direct development of the resources. In relation to the stability of a slope in large open-pit coal mine, groundwater system was investigated and the validity of horizontal drainage hole was evaluated in Pasir coal mine, Indonesia. In this work, various field tests were carried out for a characterization of groundwater system, which included in-situ permeability measurement, tracer test and monitoring of groundwater levels. Especially, the influence of SM river on the characteristics of the groundwater flow system was mainly inspected. For the permeability measurement, Guelph permeameter was employed, and was found that sandstone was more permeable than mudstone and coal seam. From a comparison of lithological structure and the results of groundwater level monitoring, sandstone and thin coal seam with fractures were found to be a main channel for groundwater flow. In the results of tracer tests, the effect of SM river on the groundwater system depends on the geological structure of its base. To identify the effect of horizontal drainage holes, 2-D groundwater modeling was performed. Four different cases were tested, which are different from the length of drainage hole and the existence of pond on top of the slope. To enhance the drainage effect and slope stability, the drainage hole should be drilled to the depth of coal seam layer, which provides a main pathway of groundwater flow and embedded by sandstone. For this purpose, correct identification of surrounding geology should be preceded.

• Tunnel and Underground Space
• /
• v.29 no.5
• /
• pp.305-317
• /
• 2019

The RMR and Q-system for characterizing rock mass and drilling core, and for estimating the support and reinforcement measures in mine galleries, tunnels and caverns have been widely used by engineers. SMR has been widely used in the rock mass classification for rock slope, but Q-Slope has been introduced into slopes since 2015. In the last ten years, a modified Q-system called Q-slope has been tested by the many authors for application to the benches in open pit mines and excavated road rock slopes. The results have shown that a simple correlation exists between Q-slope values and the long-term stable and unsupported slope angles. Just as RMR and Q have been used together in a tunnel or underground space and complemented by comparison, Q-Slope can be used in parallel with SMR. This paper introduces how to use Q-Slope which has not been announced in Korea and application examples of Pasir open pit coal mine in Indonesia.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.02a
• /
• pp.29-48
• /
• 2001

일반적인 폐수처리 시 여러 광물들이 사용되는 데 예를 들면, 수산화칼슘 및 탄산나트륨은 중화제, 점토는 응집제, 알룸(alum) 및 염화철은 인 제거제로 사용되고 있다. 산성광산배수인 경우에는 알칼리성의 중화제로 석회 (CaO), 석회석 (CaCO$_3$), 가성소다 (NaOH), 탄산나트륨 (NaCO$_3$) 등이 사용된다. 그러나, 설비비 및 유지비가 많이 들어 몇 십년 동안 계속해서 침출되는 산성광산배수를 처리하기에는 문제가 있다. 산성광산배수 (Acid Mine Drainage, AMD)는 pH가 6.0 미만이고 총산도 (totalacidity)가 총알카리도 (total alkalinity)를 초과하는 물로서 노천광이 가행되었던 지역, 가행중이거나 휴광 또는 폐광된 광산에서 유출된다. 또한 도로사면 절개부나 지하철 터널에서도 황철석(pyrite)이나 백철석 (marcasite)을 함유하는 층이 공기 중에 노출되면 산성수가 침출되어 나오기도 한다. 산성광산배수에 의한 하천수의 오염이 매우 극심하여 때로는 미생물마저도 그 속에 살 수 없게 된다. 산성광산배수에 의해 오염된 하천수의 오염범위는 산성수의 양, 농도, 하천에 유입되는 산성수의 분포, 상류에서 흘러드는 오염되지 않은 물의 양, 지류에서 유입되는 물의 양에 따라 좌우된다. 산성광산배수 오염이 문제시되고 있는 나라는 미국을 포함하여 호주, 일본, 한국, 러시아, 남아연방 등이다. 산성광산배수는 환원환경에서 생성된 석탄층 및 접촉교대 또는 열수에 의해 생성된 금속광이 공기 및 물에 노출되어 생성되는 자연적인 현상이다. 그러나 국지적인 지역에서 인간이 이 광상들을 환경영향을 고려하지 않고 대규모로 개발할 때 인간 생활에 심각한 영향을 미치는 것이다. 광산산성배수를 처리하기 위해 상기와 같이 여러 기술이 도입 적용되었으며 일부 기술들은 현재도 사용되고 있다. 각 기술마다 일장일단이 있으므로 경비의 과다, 유지 및 관리에 대한 지속성 여부, 공간의 확보 여부, 지역적 특수성에 맞춰 가장 적합한 방법을 채택하여야 하며 꾸준히 채택한 기술의 개량 및 새로운 기술의 첨가가 요구되고 있다. 따라서, 산성광산배수 오염지대에 대해 획일적으로 같은 처리방법을 채택하여 사용하는 것보다 각 지역 또는 광산산성폐수가 유출되어 나오는 광산폐기물의 특성 등을 고려하여 거기에 맞는 기술들을 복합적으로 또는 단독으로 사용하되 처리방법 채택 시 신중을 기할 것이 요망된다.

• Resources Recycling
• /
• v.26 no.2
• /
• pp.80-88
• /
• 2017

Globally, there has been a lot of research related to recycling coal ash from power plant stations. This research is happening because there is a considerable shortage of sites for reclamation of increased coal ash every year. In addition, a variety of environmental pollutants have appeared because of mining activity. Abandoned coal mine, pits, and mine tailing piles caused pollutants to come to the surface resulting in serious damage for humans and the environment. Therefore in this study, we investigated whether or not coal ashes have the ability to prevent several environmental problems by mining in Korea and a manageable form recycling coal ashes. In overseas countries, there is a sufficient field of applicable cases where coal ash is used for neutralizing AMD (Acid Mine Drainage), covering of the waste materials, grouting, and soil amendments. However in Korea, since the coal ash is classified as a 'waste', there is an insufficient field applicable cases so far. Therefore it is necessary to establish a specific standard and management system for the utilization of coal ash based on the relevant precedent cases applied abroad in order to prevent environmental pollution caused by mining activity in Korea.