• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.405-408
• /
• 2021

글로벌시대가 시작되면서 많은 사람들이 외국인과 소통하는 일이 많아졌다. 해외에 있는 사람들과 소통하기 위해 많은 사람들이 요금이 부과되지 않는 모바일 메신저를 사용한다. 하지만 많은 모바일 메신저에서는 번역기능을 제공하지 않는다. 본 연구는 다국적 언어 소통을 위한 번역이 가능한 모바일 메신저를 제공한다. 외부 번역 naver papagoAPI 와 firebase의 인증, 실시간 데이터베이스를 이용하는 안드로이드 기반 자동 번역 채팅 앱과 연결하여 자동 번역 채팅 서비스를 구현하였다. 본 논문의 애플리케이션은 기존에 번역기나 챗봇을 사용해야 했던 불편함은 낮추고 외국어 채팅의 자유도를 높여주는 결과가 나타난다. 이를 통해 자연스러운 외국어 채팅이 가능하도록 하여 서로 다른 언어를 사용하는 사람들과 언어에 상관없이 자유로운 의사소통을 가능하도록 한다.

• Journal of Welding and Joining
• /
• v.27 no.5
• /
• pp.34-41
• /
• 2009

Thermal and mechanical characteristics in dissimilar SS400-STS304 steel weldment have been investigated by 3D thermal elastic-plastic analysis. Moreover, the influence of welding residual stresses on the mechanical behaviour of this welded joint, by applying superimposed external load (tension load) was determined. The residual stresses obtained by numerical simulation were compared with the experimentally measured results. The FE results were in good agreement with the measured values. The mechanical test (hardness, tensile test) and metallurgical analysis was carried out to ensure the weld integrity. Hence, possibility of applying SS400-STS304 dissimilar steels in industries has been established.

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.58-60
• /
• 2004

In the field of welding the behavior of a welded structure under consideration may be predicted via heat transfer and residual stress analysis. In order to facilitate the industrial applications of welding, numerical modeling of heat transfer and residual stress in weldment has been carried out applying Finite Element Method (FEM) and the analysis with the external load including this residual stress due to welding has been done. The present work includes the specialized finite element codes for the calculation of nonlinear heat transfer details and residual stress redistributed along with the external load in the welded structures. A basic interface, which allows models, built in commercial preprocessing package access to the data necessary to build standard input decks for these specialized FEM codes, which are not supported by commercial package. The results from the FEM codes are imported back into commercial package for visualization. In addition the residual stress values are exported to commercial package (such as ANSYS, PATRAN etc.) for further analysis with the external loads, which make the FEM codes fully applicable to the industrial purpose.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.55.1-55.1
• /
• 2012

2010년과 2011년의 관측시즌에 총 23일의 BVR 측광 관측을 통하여 처음으로 얻은 2세트의 BVR 광도 곡선을 분석하였다. 새로운 두 세트의 BVR 광도곡선은 제1식과 제2식의 깊이가 거의 비슷하지만, 식바깥 부분에서 관측 시즌에 따라 서로 다른 모양의 잘 발달된 파형 모양을 보인다. 이는 BD And가 흑점이 활동이 매우 심한 짧은 주기의 RS CVn형 식쌍성임을 나타내는 것이다. 우리의 극심시각을 포함한 모든 극심시각을 분석하여 BD And의 공전주기가 규칙적으로 변하는 것을 발견하였다. 이 변화를 보이지 않는 제3천체에 의한 광시간 효과로 가정하여, 궤도이심율이 0.83이며, 9.15년의 주기를 가진 광시간 궤도를 결정하였다. Wilson-Devinney 쌍성 모형을 이용하여 흑점과 제3광도를 고려한 두 세트의 광도곡선 해를 산출하였고, BD And의 절대량을 구하였다. 식바깥의 파형 모양의 변화는 주성의 표면에 매우 큰 두 개의 흑점과 그 위치와 이동으로 잘 설명되며, 전체 광도의 약 15%에 해당되는 제3광도가 검출되었다. 주기연구에서 구한 제3천체의 궤도요소와 제3광도의 결합으로 제3천체의 질량과 궤도경사각을 유추하였다. BD And의 성분별의 평균 나이가 등연령 곡선으로부터 태양과 비슷한 4.6${\times}$109년으로 산출되었다. BD And를 포함하여 현재까지 알려진 짧은 주기의 RS CVn형 쌍성들의 H-R도가 항성진화 경로와 함께 제시되며, 그 천체물리학적 의미를 살펴본다.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.316-318
• /
• 2004

In recent years, plastic waste has been recognized as a worldwide environmental issue. To solve the disposal problem of the plastic waste, alternative treatment such as the use of biodegradable plastic(polybutylene succinate: PBS) is indeed highly in demand due to its merit of PBS buried in soil decomposed into carbon dioxide and water. In the present study, for the production of further functional PBS with TiO$_2$ as photocatalyst, which shows the decomposition of detrimental organic compound and pollutant under ultraviolet irradiation, we attempted to prepare photocatalytic TiO$_2$ coatings on PBS substrate by HVOF and plasma spraying techniques under various conditions using three kinds of agglomerated powders (P200: 200nm, P30: 30nm, P7: 7nm). The microstructures of coatings were characterized with SEM and XRD analysis, and the photocatalytic efficiency of coatings was evaluated through the photo degradation of gaseous acetaldehyde. Therefore, such functional TiO$_2$-Plastic composite material is expected to considerably contribute to the reduction of aggravated environmental problem.

• Journal of Welding and Joining
• /
• v.17 no.5
• /
• pp.77-82
• /
• 1999

Resistance spot welding process is completed in very short time and there are many factors affecting on the generation of heat. It is difficult to control these experimental factors and monitor distribution of the temperature and stresses in the experimental analysis case. and too much time and expense are required for the experimental trials to fine proper welding condition. So numerical analyses have been attempted steadily, but most numerical analyses on the resistance spot welding are mainly focused on thermal behavior. Therefore, in this paper, the numerical analysis of mechanical behavior as well as heat conduction is carried out for the spot welding process. For this numerical analysis, axial symmetric computer program for the spot welding analysis by F.E.M. has been developed considering heat conduction and thermal elastic-plastic theory. Material properties depending on temperature such as density, heat conductivity, heat expansion coefficient, specific heat, yield stress, elastic modulus, and specific resistance are considered. Using the results of temperature distribution obtained from heat conduction analysis, the thermal elastic-plastic analysis is carried out to clarify mechanical behavior of spot welded specimen. In order to evaluate the effect of residual stresses, numerical analyses are carried out under tension-shear load in two cases respectively; one with residual stress, the other without residual stresses.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.127-131
• /
• 2007

전력선을 이용한 통신 기술(Power Line Communication, PLC)은 현재 국내외에서 큰 관심을 받는 연구 분야로 국내에서도 이에 대한 연구와 개발이 활발히 진행되고 있다. 이 기술은 전력선을 이용하여 음성 데이터 인터넷 등을 고속으로 이용할 수 있는 서비스를 제공하여 나아가 가정의 모든 가정기기들을 연결하는 홈 네트워크를 구성할 수도 있다. 하지만 전력선 통신 기술에는 보안상 많은 문제가 존재한다. 그 이유는 전력선 통신 네트워크가 전력선과 IP망을 둘 다 사용하는 혼합형 네트워크로 구성되어 있기 때문이다. 이로 인해 기존 IP망에서 사용하던 보안 기술들을 그대로 전력선 통신 네트워크에 적용하기에는 많은 어려움이 따르며 새로운 기술을 개발하고 그것을 기존 인프라에 적용하는 것 또한 많은 어려움이 따른다. 이에 본 논문에서는 기존 IP망에서 사용하던 공개키와 대칭키 방식을 이용하여 서로 다른 네트워크로 구성되어 있는 전력선 통신 네트워크의 보안을 위한 혼합형 보안구조를 제안한다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.329-334
• /
• 2002

Preflex beam is a method of construction to hold the Pre-compressive stresses over the concrete pier by the Preflexion load. During the fabrication of the girder, welding causes the welding residual stresses. The welding residual stresses must be relieved to generate the accurate compressive pre-stresses that is designed. On this study, to find out the thermal distribution characteristics on the girder by welding, both the three-dimensional finite element analysis and the two-dimensional finite element analysis in a quasi-steady state is carried out. After comparing with each result between the three-dimensional analysis and the two-dimensional analysis, finite element analysis is carried out against the actual girder and analyze welding thermal distribution characteristic over the preflex beam and obtain the input data for the analysis of the welding residual stresses.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.269-273
• /
• 2003

During the laser welding, weldments are suddenly heated by laser beam and cooled. This phenomenon gives occasion to complex welding residual stresses, which have a great influence on structural instability strength, in laser welds. However, a relevant research on this field is not sufficient until present and residual stress measurements have experimental and practical limitations. For these reasons a numerical simulation may be attractive in order to solve the residual stress problem. In order to determine the distribution of heat and welding residual stresses in laser welds with the nail-head shape, authors conduct the finite element analysis (two-dimensional unstationary heat conduction & thermal elasto-plastic analysis). From the result of this study, we can confirm the stress concentration is occurred at the place of melting line shape changed in laser welds with the nail-head shape.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.279-283
• /
• 2003

As the state of the art in recent years Laser-Arc Hybrid welding is tried actively because of its various economical and technical advantages. In this study, melting tendencies according to the variation of laser-arc distance are investigated in case of YAG laser-TIG Hybrid welding process of AH32 ship structural steel. Nd-YAG laser with a laser beam power of 3KW is used and varied laser-arc distance 0mm to 10mm with fixing the TIG current as l00A. There is certain distance between laser and TIG elecrode to improve welding heat input and also increase the penetration.