• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.1
• /
• pp.201-206
• /
• 2022

In this paper, a flushing system with automatic opening and closing function of the toilet cover was studied. It works by an infrared sensor attached to the cover is detected or not. When the infrared sensor of the open function detects it, the servomotor is driven on the toilet cover to raise the cover, and when the infrared sensor with the close function detects the infrared sensor, the cover is set to be lowered. A tilt sensor is attached to the inside of the cover to operate when the cover goes down, and when this is activated, the servomotor connected to the toilet lever opens the stopper of the supply port and sends water down. In addition, we minimized the inconveniences for the next user when they use the toilet by using the non-contact water level sensor and LED function to notice the water is clogged during the flushing process. Also, we implemented UV-LED function to prevent bacterial growth while the toilet is closed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.199-202
• /
• 2000

In this paper, we developed an expert system that helped a machine-tool designer to select a moderate servomotor of the feed drive unit of a machine tool. With the specification of the drive unit, it searches for the set of servo-motors that have enough torque and power to satisfy the driving condition which the designer defines from the database. me database also contains knowledge and rules, which describe the design process and calculate design parameters of a feed drive. The knowledge-based design support module shows every steps of inference and reason for the solution that it provides.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.5 s.98
• /
• pp.66-73
• /
• 1999

To enhance machining efficiency, tool exchange time have to be reduced. Most automatic tool changer is made up of compound cam and motor. it is not easy to design and manufacture compound cam, and it has no flexibility. But if servo motor is used, it is easy to changer is developed with servo motor, clutch, ball-screw and spline nut. Experimental results show that automatic tool changer designed with servo motor have good faculties.

• 기계와재료
• /
• v.25 no.3
• /
• pp.6-15
• /
• 2013

유압프레스의 단점을 극복하기 위해서 서보모트를 장착하여 성형속도를 높인 서보 유압프레스를 개발하게 되었으며, 특히나 서보모터를 국내산으로 적용하여 듀얼형으로 유압시스템의 효율성을 높여 최종적으로 개발함으로써 서보 유압프레스를 완전 국산화하였다. 또한 하사점 위치 제어의 용이성을 확보하기 위해 프레스 램용 메인 실린더에 톱니나사부를 만들어 임의의 위치에 정지할 수 있는 정지정도 및 하사점 위치 제어정밀도를 향상시켰으며, 유량의 미세 제어를 통해 프레스 램의 동작성을 개선코자 하였다. 다이쿠션은 메인 실린더와의 연계 제어를 통해 제품의 손상 방지 및 제품 추출의 용이성을 확보하였으며, 소재의 종류나 제품의 형상 특성에 따라 프리모션 제어가 가능한 지식기반형 자율제어 시스템을 적용하였다. 듀얼 서보시스템과 유압펌프가 연계구동함에 따라 기존 유압프레스 보다 약 40%이상의 에너지절감을 달성할 수 있을 것으로 예측되며, 현재 에코머신 인증제도에 대한 논의가 활발한 시점에서 매우 적합하고 필요한 하이브리드형 서보 유압프레스의 국산화 개발 사례라고 하겠다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.1
• /
• pp.76-80
• /
• 1990

DC-servomotor acts an important role in robots and manipulatirs. But the precise control of DC-motor is difficult by a using usual linear controller because of the nonlinear characteristics of DC-motor. This study suggests the use of fuzzy controller in the control of DC-servomotor speed. The fuzzy controller is designed from a fuzzy model which can represent nonlinear systems very well. Hence the fuzzy controller is very useful in the control of nonlinear systems such as DC-motor. We construct a fuzzy model of DC-servomotor, design a fuzzy controller from the fuzzy model, and compare that with a linear controller. When we use the fuzzy controller, the static ripples are reduced and the rise time is required 20% less than in using a linear controller.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.40-45
• /
• 2004

This paper presents the parallel distributed control scheme for shaping of the bent glass. The designed system consists of a PC, a main controller and 11 servo-controllers, the precision motion controllers. Each elements are connected by using RS-232C and 8-bit data bus. In order to guarantee the stability and the control performance, we use a precision PID motion controller and a H-bridge on the servo-drivers. PC calculates position values of 11 DC motors by using the pre-determined curvature value and offers the user interface environment operator. The main controller provides the control instructions and parameter values to 11 servo-controllers by chip enable signal, simultaneously. Using the received commands and parameter values, the servo-controllers control the positions of the DC motors based on PID control scheme.

• Journal of the Korea Society for Simulation
• /
• v.24 no.3
• /
• pp.45-54
• /
• 2015

This paper presents the influence of backlash can be greatly increased on the frequency response characteristic which is presented as the angular velocity of a motor to the motor input voltage, if the motor input voltage is adequately reduced. And, this paper verifies theoretically, analytically and experimentally the availability on the method of detecting the change of backlash magnitude by investigating on the change of the anti-resonance and resonance frequencies in the frequency response characteristic due to the change of backlash magnitude. The amount of change of anti-resonance frequency is more useful that of resonance frequency when detecting the change of backlash magnitude, because the change of anti-resonance frequency can be measured more stable. This paper also shows the sharp change of resonance frequency can be investigated when the motor input voltage is enough reduced. The work will be useful for the further research on the backlash estimation method of a servo system with a gear reducer.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.05a
• /
• pp.247-249
• /
• 2018

본 논문에 이용되는 자율주행 로봇은 실시간으로 많은 데이터를 처리하며 통신해야한다. 그러기 위해서 ODROID 임베디드 보드와 STM32F103ZET6 마이크로프로세스를 이용하여 실내 자율주행 로봇의 서보모터와 엔코더모터를 제어하여 조향장치 및 현재 이동거리를 알 수 있으며, 센서와 통신 방법 및 제어 과정 및 설계 방안에 관한 내용이다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.291-292
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.815-816
• /
• 2013