This study was performed to investigate the relation between birth weight and survivability on the production of cloned Hanwoo calves. The 580 cloned embryos were transferred into the 293 recipients. The pregnancy rate of the cloned embryos was 72.3% at 50 days after embryo transfer, and then the rate was dramatically decreased. The mean gestation lengths were 287 days in both clone (range of$279{\sim}295$ days) and artificial insemination (AI, range of $255{\sim}293$ days) calves, respectively. The mean birth weight of cloned calves (30.3kg) was significantly higher compared to that of AI calves (23.7kg) (p<0.05). Among the cloned calves, the birth weight was not different in both normal delivery (n=17, 29.9kg) and caesarean section (n=14, 32.3kg). The weight, however, was significantly higher in the clones (n=18, 32.8kg) dead within 175 days than that of the clones (n=11, 28.3kg) alive more than 175 days after birth (p<0.05). Interestingly, all cloned calves weighed <15kg (n=5) or >35kg (n=9) at birth have been dead within 175 days from the date of birth. The causes of death in the cloned calves were premature birth (n=2, 10.0%), abnormal function of lung and liver (n=2, 10.0%), abnormal function of lung (n=4, 20.0%), malformation (n=4, 20.0%), unknown (n=4, 20.0%), and sudden death syndrome (n=4, 20.0%), respectively. Our findings suggest that normal birth weight is one of the most important factors to survive more than 6 months in cloned calves.
This study was conducted to determine effects of different ratios (3.5, 3.0 and 2.5) of nonfibrous carbohydrate (NFC) to ruminally degradable protein (RDP) on in vitro fermentation and lactation performance of dairy cows and optimum ratio of NFC to RDP in dairy rations. In vitro trial was conducted up to 12 hr with ruminal fluidtaken from ruminally cannulated Holstein cows. The level of dietary NFC did not affect ruminal pH. The ammonia-N concentration was not significantly different among treatments until 6 hr incubation, however, it was significantly (P < 0.05) decreased as the ratio of dietary NFC to RDP increased on 9 and 12 hr incubation. For volatile fatty acids, concentrations of both acetate and propionate were significantly (P < 0.05) increased on 3 hr incubation as dietary NFC contents of treatments increased, in other incubation times, they had no significant differences among treatments. Valerate and A:P ratio were not affected by the ratio of NFC to RDP. Isoacids and total VFAs were significantly (P < 0.05) increased with increasing dietary NFC contents and their values were highest in the treatment of 3.0 ratio. Meanwhile, for in vivo trial, 18 Holstein lactating cows were allotted to treatments in three groups of 6 cows. They were employed for 24 weeks to investigate nutrient intakes, and milk yield and composition according to different ratios of dietary NFC to RDP. Intakes of dry matter and energy were significantly (P < 0.01) increased, but NDF intake was significantly (P < 0.01) decreased as the ratio of dietary NFC to RDP increased. Milk yield for the ratio of 3.5 (32.7 kg) was significantly (P < 0.05) higher than those of other treatments. Milk fat (%) was significantly (P < 0.05) higher for the treatments of 3.0 (3.79 %) and 2.5 (3.79 %) than that (3.48 %) for the ratio of 3.5, but milk fat yield was not different among treatments. Contents and yields for milk protein and solids-not fat were linearly (P < 0.01) increased as the ratio of dietary NFC to RDP increased. However, milk urea nitrogen concentration was significantly (P < 0.05) decreased with increasing dietary NFC levels. Our results showed that the increasing level of NFC in the diet of dairy cows enhanced ruminal fermentation, N utilization and milk production and suggested that maximal fermentation and lactation performance were achieved when the dietary ratio of NFC to RDP was more than 3.0 in dairy rations.
Hypoadrenocorticism results from the deficient adrenal gland production of glucocorticoids or mineralocorticoids. Fludrocortisone have been used for the management of hypoadrenocorticism in dogs. But desoxycorticosterone pivalate (DOCP) have been administered for management of hypoadrenocorticism in dogs since several years because of the equivalent effect of fludrocortisone, and lessening of owner and patient's effort. The therapy of DOCP was evaluated in 14 dogs diagnosed with hypoadrenocorticism based on clinical signs, an electrolyte imbalance, and the results of an adrenocorticotropic hormone stimulation test. DOCP was administered at 25-day intervals at an initial dose of 2.2 mg/kg. The dogs were monitored for clinical signs and serum electrolyte, blood urea nitrogen, and creatinine concentrations every 25 days. Fludrocortisone was an effective treatment in dogs overall; however, a change to DOCP was necessary in 7 dogs because of adverse effects or poor responses. Another 7 dogs were treated with DOCP from the first time. A total of 14 dogs were treated with DOCP. Clinical signs and electrolyte imbalance resolved completely in 12 dogs. However, mild clinical signs, such as shivering, remained in 2 dogs, and 4 dogs required regular supplementation with prednisone. Improvements in clinical signs and electrolyte imbalance were significantly better after treatment with DOCP than with fludrocortisone. The results suggest that DOCP may be a better choice than fludrocortisone for the management of hypoadrenocorticism in dogs.
According to one Medicare report, in the US, total federal spending on health care expends almost 18 percent of the nation's GDP, about double what most industrialized nations spend on health care. And in 2011, Medicare spending reached close to $554 billion, which amounted to 21 percent of the total spent on U.S. health care in that year. Of that $554 billion, Medicare spent 28 percent, or about $170 billion, on patients' last six months of life. So what are the reasons of this high cost in EOL care and its possible solutions? Much spendings of Medicare on End-of-Life care for the terminally ill/chronically ill in the US has led health economics experts to assess the characteristics of the care. Decades of study shows that EOL care is usually supply-sensitive and poor in cost-effectiveness. The volume of care is sensitively depending on the supply of resources, rather than the severity of illness or preferences of patients. This means at the End-of-Life care, the medical resources are being overused. On the other hand, opposed to the common assumption, "The more care the better utility", the study shows that the outcome is very poor. Actually the patient preference and concerns are quite the opposite from what intense EOL care would bring about. This study analyzes the reasons for the supply-sensitiveness of EOL care. It can be resulted from the common misconception about the intense care and the outcome, physicians' mission for patients, lack of End-of-Life Care Decision which helps the patients choose their own preferred treatment intensity. It also could be resulted from physicians' fear of legal liabilities, and the management strategy since the hospitals are also seeking for financial benefits. This study suggests the possible solutions for over-treatment at the End-of-Life resulting from supply-sensitiveness. Solutions can be sought in two aspects, legal implementation and management strategy. In order to implement advance directive properly, active ethics education for physicians to change their attitude toward EOL care and more conversations about end-of-life care between physicians and patients is crucial, and incentive system for the physicians who actively have the conversations with patients will also help. Also, the general education towards the public is also important in the long run, and easy and official advance directive registry system-such as online registry-has to be built and utilized more widely. Alternative strategies in management are also needed. For example, the new strategic cost management and management education, such as cutting unnecessary costs and resetting values as medical providers have to be considered. In order to effectively resolve the problem in EOL care for the terminally ill/chronically ill and provide better experience to the patients, first of all, the misconception and the wrong conventional wisdom among doctors, patients, and the government have to be overcome. And then there should be improvements in systems and cultures of the EOL care.
Journal of The Korean Society of Grassland and Forage Science
/
v.6
no.1
/
pp.49-52
/
1986
The objective of this study was to find out the productivity of F_2 material derived from F_1 hybrid Maize (Zea mays L.) by multiplication and their response to plant population. Suweon 19 and Junju-Ok were grown at three population densities. Populations were ca. 8.3, 10.4 and 13.9 thousand plants per 10a. The results are summarized as follows; 1. The number of barren plants differed significantly for the two generations but other yield components comparisons were not significant at P(0.05). 2. Ear and TDN yield were higher from the $F_1$ hybird of Suweon 19 than from the F_2 material, while yields of Jinju-Ok and stover yield of both hybrids were not affected by generation. 3. Plant and ear height were not affected by population density but barren plants were increased at high population. Length and weight of a ear, and ear (including cobs)-to-stover ratio decreased with increased population. 4. Increasing population density resulted in significant decrease in ear and TDN yield, while stover yield not decreased.
Korean Journal of Agricultural and Forest Meteorology
/
v.3
no.4
/
pp.185-198
/
2001
This study was conducted to reveal the effects of local climatic conditions on reproductive growth in a mature stand of Korean white pine based on climatic estimates. For this, the reproductive growth such as production and characteristics of cone and seed were first measured and summarized for seven years from 1974 to 1980. The local climatic conditions in the study site were also estimated by both a topoclimatological method and a spatial statistical technique. The local climatic conditions were then correlated with and regressed on the growth factors to reveal the relationships between the climatic estimates and the reproductive growth. Average number of conelet formation per tree showed highly negative correlation with some climatic variables related to minimum temperature in the year of flower bud differentiation. Especially, the most significant negative correlation were found between average of the minimum temperature for June and July of flower bud differentiation year and the number of conelet formation. There was no significant correlation between the number of cone production and climatic variables. However, total precipitation from December of the flowering year to February of the cone production year showed the most high correlation (r=0.6036) with the number of cone production. It was found that significant climatic variables affecting the amount of cone drop and cone drop percentage were the sum of cloudy days from June of the flowering year to August of the cone production year. Positive correlation was significantly recognized between the average weight of empty seed per cone and total precipitation from December of the flowering year to February of the cone production year. For the percentage of empty seed, five climatic variables among 19 variables were significantly correlated at 10% level. The average weight of a cone showed negative correlation with total precipitation from June of the flowering year to August of the cone production year. It was also found that average weight of a seed had highly negative correlation with total precipitation from December of the flowering year to February of the cone production year. The average weight of cone coat was negatively correlated with two climatic variables derived from clear days, which are sum of clear days from November of the flowering year to March of the cone production year and sum of clear days from December of the flowering year to February of the cone production year. On the other hand, it showed positive correlation with mean temperature of May in the flowering year. The exactly same results were obtained in correlation analysis for the percentage of cone coat.
It was proved that cold tolerance of rice plants at the young microspore stage was affected by water temperature and nitrogen application from the spikelet differentiation stage to the young microspore stage, and this mechanism could be explained in the point of view of pollen developmental physiology. The cold tolerance of rice plants at the young microspore stage was severely affected by water temperature (Previous water temperature) and nitrogen application(Previous nitrogen application) from the spikelet differentiation stage to the spikelet differentiation stage. Although the duration is only 10 days or so from the spikelet differentiation stage to the young microspore stage, these days are very important period to confirm the cold tolerance of rice plants at the young microspore stage. The higher previous water temperature up to $25^{\circ}C$ and the deeper previous water depth up to 10cm caused the more cold tolerance of rice plants. Water irrigation of 10cm before the cretical stage showed lower cool injury than that of water irrigation of 20cm during the critical stage. The preventive effect of cool injury by combined treatment of the deep water irrigation before and during the critical stage was not additive but synergistic. The cold tolerance of rice plants grown in previous heavy nitrogen level was rapidly decreased when nitrogen content of leaf blade at the young microspore stage was excessive over the critical nitrogen level. Nitrogen content of leaf blade at the changing point of cold tolerance was estimated as about 3.5% for Japonica cultivars and about 2.5% for Indica x Japonica cultuvars. It is considered that these critical nitrogen contents of leaf blade can be used as a index of the safe critical nitrogen level for the preventive practices to cool injury. It was summarized that increase of engorged pollens per anther by high previous water temperature resulted from the increase of number of differentiated microspores per anther, otherwise, the increase of engorged pollens by the decrease of previous nitrogen level was caused by the decrease of the number of aborted microspores per anther.
The purpose of this study is to develop a on-line design tool for effectively coping with e-Business environment, or product design process into a Cyber model for traditional manufacturers which attempts new product development under such environment. It was finally developed as a model named $\ulcorner$Design Vortal Site; e-BVDS) that was based on the structure and style of internet web site. Results of the study can be described as follows ; \circled1 e-Business is based on the Internet. All processes in the context of e-Business require models whose structure and method of use are on-line styles. \circled2 In case that a traditional manufacturing business is converted into e-Business, it is better to first consider Hybrid Model that combines resources and advantages of both such traditional and digital businesses. \circled3 The product design process appropriate for e-Business environment has to have a structure and style that ensure utilization of the process as an Internet web site, active participation by product developers and interactive communication between participants in designing and designers. \circled4 $\ulcorner$e-BDVS) makes possible the use of designers around the wend like in-house designers, overcoming lack in creativity, ideas and human resources traditional business organizations face. However, the operation of $\ulcorner$e-BDVS$\lrcorner$ requires time and budget investments in securing related elements and conditions. \circled5 Cyber designers under $\ulcorner$e-BDVS$\lrcorner$ can easily perform all design projects in cyber space. But they have some limits in playing a role as designers and they have difficulty in getting rewards if such projects completed by them are not finally accepted. \circled6 $\ulcorner$e-BDVS) ensures the rapid use of a wide range of design information and data, reception of a variety of solutions and ideas and effective design development, all of which are not possible through traditional processes. However, this process may not be suitable to be used routine process or tool. \circled7 $\ulcorner$e-BDVS$\lrcorner$ makes it possible for out-sourcing or partners businesses to overcome restrictions in time and space and improve productivity and effectiveness. But such they may have to continue off-line works that can not be treated on-line.
To investigate the effects of incorporation of green manures (GM) into a sandy loam soil on growth, yield, and nutrient uptake of tomato (Lycoperiscon esculentum Mill.) and nutrient balances (input minus offtake of nutrients), five tomato production systems were compared under the condition of plastic film house: 1) a no input system (no additional amendment or inputs, 0-To-0-To); 2) a conventional system (application of N-P-K chemical fertilizers, Cf-To-Cf-To); 3) a leguminous GM-containing system (hairy vetch-tomato-soybean-tomato, Hv-To-Sb-To); 4) a graminaceous GM-containing system (rye-tomato-sudan grass-tomato, Ry-To-Sd-To); and 5) system mixed with leguminous and graminaceous GMs (rye-tomatosoybean- tomato, Ry-To-Sb-To). Here, hairy vetch and rye were cultivated as winter cover crops during late $Dec{\sim}late$ Feb and soybean and sudan grass were cultivated as summer cover crops during late $Jun{\sim}mid$ Aug. All of them cut before tomato planting and then incorporated into soil. Biomass of GMs was greater in summer season than that of winter season. Nitrogen amount fixed by a leguminous plants was about $126\;kg\;ha^{-1}$ per a cropping season, corresponding to 60% N level needed for tomato production, which was comparable to 50 and $96\;kg\;ha^{-1}$ fixed by rye and sudan grass. As a result, tomato yield of Hv-To-Sb-To system (legume GM treatment) was similar to Cf-To-Cf-To (conventional), but that in Ry-To-Sd-To system (graminaceous GM treatment) was not attained to a half level of conventional treatment. Nutrient budgets for N, P and K on the conventional farm were balanced or somewhat positive exception for minus-balanced K. Ry-To-Sd-To system showed a positive N, P and K budgets due to the depressed growth of tomato which is caused by high C/N ratio and low N-fixing capacity of the GMs. Inversely, those of Hv-To-Sb-To system were negative in all of N, P and K budgets because of increased growth and yield of tomato with high nitrogen-supplying capacity as well as low C/N ratio of leguminous GM. In conclusion, although conventional cultivation has an advantage in relation to N, P and K nutrient budgets rather than GM-incorporated systems, a leguminous GMs could be recommended as nitrogen reservoir and soil amendment because the yield of tomato between use of leguminous GM and conventional cultivation was not only significantly difference, but also GMs commonly reduce nutrient loss and improve microbial communities.
For the past few years, KISTI has been servicing an online simulation execution platform, called EDISON, allowing users to conduct simulations on various scientific applications supplied by diverse computational science and engineering disciplines. Typically, these simulations accompany large-scale computation and accordingly produce a huge volume of output data. One critical issue arising when conducting those simulations on an online platform stems from the fact that a number of users simultaneously submit to the platform their simulation requests (or jobs) with the same (or almost unchanging) input parameters or files, resulting in charging a significant burden on the platform. In other words, the same computing jobs lead to duplicate consumption computing and storage resources at an undesirably fast pace. To overcome excessive resource usage by such identical simulation requests, in this paper we introduce a novel framework, called IceSheet, to efficiently manage simulation data based on execution metadata, that is, provenance. The IceSheet framework captures and stores each provenance associated with a conducted simulation. The collected provenance records are utilized for not only inspecting duplicate simulation requests but also performing search on existing simulation results via an open-source search engine, ElasticSearch. In particular, this paper elaborates on the core components in the IceSheet framework to support the search and reuse on the stored simulation results. We implemented as prototype the proposed framework using the engine in conjunction with the online simulation execution platform. Our evaluation of the framework was performed on the real simulation execution-provenance records collected on the platform. Once the prototyped IceSheet framework fully functions with the platform, users can quickly search for past parameter values entered into desired simulation software and receive existing results on the same input parameter values on the software if any. Therefore, we expect that the proposed framework contributes to eliminating duplicate resource consumption and significantly reducing execution time on the same requests as previously-executed simulations.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.