• Composites Research
• /
• v.12 no.6
• /
• pp.74-82
• /
• 1999

The static and fatigue characteristics of polyurethane foam cored sandwich structures are investigated. Three types of the specimens with the glass fabric faces and the polyurethane foam core are used; non-stitched. stitched, and stiffened sandwich specimen. Especially additional structural reinforcements with the twisted polyester and glass fiber for thickness direction are made to stitched sandwich structure panel to minimize the delamination of structure which is stitched the upper and lower faces through the core and the resin is impregnated Into stitched fiber with the characteristics of low viscosity of resin at resin flow temperature and cured together with during the curing process. Bending strength of stitched specimen which is 50 mm $50{\times}50{\;}mm$ pitched is improved by 50 % as com-pared with non-stitched specimen and stiffened specimen is improved 10 times more than non-stitched structure. After fatigue testing of $10^6$cycles by 20% of ultimate load under monotonic load, the bending fatigue strength of non-stitched specimen is decreased by 27% of monotonic bending strength, 39% for stitched structure and 20% for stiffened specimen. To verify the aging effect of polyurethane form core, Ultrasonic C-scanning equipment is used to detect the damage of skin laminate alone after fatigue test. From results of UT C-scan images, there is no defect that can be damaged occurred during fatigue test. It is concluded that the decrease of bending strength for foam cored sandwich specimen is caused by the decrease of stiffness due to the aging of polyurethane foam core during fatigue cycles.

• Korean Journal of Ecology and Environment
• /
• v.39 no.4 s.118
• /
• pp.489-497
• /
• 2006

The feasibility of the Natural and Ecological Wastewater treatment System (NEWS) was examined for rural wastewater treatment in Korea. The intermittent trickling biofilter with high hydrophilic filter media was used for pretreatment for suspended solids and organic pollutants. The subsequent constructed wetland with porous granule materials was used for promoting nutrient removal. The results show that the removal efficiencies of the system were high with respect to the water quality parameters except COD. Even if the effluent from the biofilter did not meet the guidelines for wastewater treatment plant effluent in Korea in terms of $BOD_5$ and TN, the final effluent of the system meets the guidelines us to good performance of the constructed wetland. The regression analysis between pollutant loading rate and removal rate indicated that the system could have stable removal for SS, $BOD_5$, TN, and TP in the given influent ranges. The analysis in the winter period indicated that the wetland covered with transparent polycarbonate glass had the statble performance during the winter period dus to increase of temperature inside the wetland without any heating system. With the stable performance, effective poilutant removal, low maintenance, and cost-effectiveness, the NEWS could be considered as an alternative treatment system for decentralized regions and rural communities in Korea.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1B
• /
• pp.21-30
• /
• 2012

Sensor networks are composed of a great number of sensor nodes with constrained battery. Disjoint multipath scheme based flooding method has a merit that efficiently construct multipath in irregular networks, but causes lots of energy consumption in networks. Flooding method is not a suitable technology in wireless sensor networks with constrained battery. We introduce energy-efficient geographic routing scheme considered as an efficient, simple, and scalable routing protocol for wireless sensor networks. The geographic routing scheme on multipath generates a problem with a congestion. So we introduce the concept of multipath pipeline as a congestion avoidance strategy. But multipath pipelines have a big problem on the boundary of holes under irregular networks. We propose a novel disjoint multipath scheme as combined method with geographic routing scheme and hole detouring algorithm on multipath. A novel disjoint multipath scheme constructs disjoint multipath pipelines efficiently for reliability without a collision in irregular wireless sensor networks. Simulation results are provided to validate the claims.

• Restorative Dentistry and Endodontics
• /
• v.33 no.5
• /
• pp.443-451
• /
• 2008

The purpose of this study was to evaluate the effect of additional etching procedure prior to Maxcem resin cement application in indirect restoration cementation using push-out bonding strength. One hundred and two extracted human molars were used to make indirect resin restorations of gold inlay and Synfony. These restorations were cemented using Maxcem and Variolink II. Additional etching procedures were done for one group with Maxcem. Three groups have 17 specimens in both restoration types. Push-out bond strength was measured using multi-purpose tester and calculated for bonding strength per sqaure-millimeter area. The mean bonding strength values were compared using SPSS 12.0K program for one-way ANOVA and Scheffe's Test with 95% significance. Under the condition of this study, the additional etching procedure prior to usage of Maxcem resulted in reduced bond strength for both of restoration types.

• Tunnel and Underground Space
• /
• v.22 no.4
• /
• pp.276-283
• /
• 2012

Changes in rock properties due to freezing and thawing cycles ranging from $-20^{\circ}C$ to $10^{\circ}C$ were checked for the typical Korean rocks: granite (weathered), limestone, sandstone, tuff, shale and basalt. The porosity, seismic velocity, shore hardness and specific gravity were measured every 10 cycles for each type of rock up to 40 cycles. The specific gravity was rarely changed. Granite (w), shale and basalt decreased gradually in their shore hardness and seismic velocity values, these values for limestone, sandstone and tuff changed only a very little. The porosity increased in the granite (w), shale and basalt, whereas in the others it did not change. Due to the low tensile strength with high porosity, granite (w), shale and basalt were susceptible to the F-T cycles. A linear regression equation was calculated based on the experiment results according to properties and types of rock. The relationship between the freeze-thaw sensitivity (=initial porosity/initial tensile strength) and the coefficients of the regression equation was examined. With additional experimental data, the coefficients of the regression equation can be estimated using the F-T sensitivity. This makes it possible to predict the properties of rock as affected by freeze-thaw weathering by only measuring the initial properties without knowledge of the regression equation coefficients for each type of rock.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.4
• /
• pp.201-212
• /
• 2002

This paper proposes a reconfigurable scheduler model that can support various real-time scheduling algorithms. The proposed model consists of two hierarchical upper and lower components, task scheduler and scheduling framework, respectively. The scheduling framework provides a job dispatcher and software timers. The task scheduler implements an appropriate scheduling algorithm, which supports a specific real-time application, based on the scheduling framework. If system developers observe internal kernel interfaces to communicate between two hierarchical components, they can implement a new scheduling algorithm independent of complex low kernel mechanism. Once a task scheduler is developed, it can be reused in a new real-time system in future. In Real-Time Linux (5), we implemented the proposed scheduling framework and several representative real-time scheduling algorithms. Throughout these implementations, we confirmed that a new scheduling algorithm could be developed independently without updates of complex low kernel modules. In order to confirm efficiency of the proposed model, we measured the performance of representative task schedulers. The results showed that the scheduling overhead of proposed model, which has two separated components, is similar to that of a classic monolithic kernel scheduler.

• Resources Recycling
• /
• v.29 no.1
• /
• pp.43-52
• /
• 2020

The objectives of this study were to identify the optimal mix of foam concrete with the low-strength and high-flow for the repairing ground subsidence situation emergently by utilizing a large amount of industrial by-products and evaluate the possibility by applying it to the site. The factors of the experiment were the mixing ratio of mixing water and a foaming agent and the mixing ratio of foam over paste volume. The optimal mix identified by the experiment was applied to the field and basic properties were evaluated. The results of the experiment showed that the optimal mixing ratio of mixing water and the foaming agent was 10%. Moreover, when the mixing ratio of pre-foam over paste volume was 170%, it satisfied the target. However, to ensure stable quality when applying to the field, the foam mixing ratio was set 140% for the field application. The field application test of foam concrete with the low-strength and high-flow using an eco-friendly binder satisfied all target performances. Therefore, the possibility of using it as a mixture and construction method for a ground repair system is confirmed. However, there was a quality deviation between the upper part and the lower part due to the separation between foam and paste. Consequently, further studies are needed to improve it.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.27-27
• /
• 2019

본 연구는 2019년 물관리기본법 시행과 함께 추진하는 유역물관리체제 수립과 운영에 대해 분석하고자 한다. 유역물관리는 기존의 행정체계 중심으로 추진된 물관리에서 드러난 비효율성을 극복하고 물순환에 기초하여 더욱 효율적이고 자연 친화적으로 운영하고자 하는 통합물관리의 기초이다. 유역물관리제도를 적절하게 수립하고 운영하기 위해서는 한국보다 앞서 유역물관리제도를 채택하고 운영해온 경험을 면밀하게 검토하고 장단점을 학습하여 한국 현실에 맞게 응용하는 지혜가 필요하다. 따라서 본 연구는 유역물관리제도를 성공적으로 수립하고 운영해 온 영국(잉글랜드 및 웨일스)과 프랑스 사례를 검토하여 시사점을 도출하고자 한다. 영국(잉글랜드 및 웨일스)은 1973년 유역관리청을 10개 대유역에 설치하여 유역물관리체제를 수립하고 운영하였지만 1970년대 및 1980년대 경제난을 겪으면서 관련 투자가 줄어들고 하천의 수질 악화가 지속하였으며 유역관리청과 지방정부와의 긴밀한 협조 부재로 관리의 어려움이 증가하였다. 결국, 1989년 10개의 유역관리청을 상하수도 서비스회사로 전환하고 물서비스감시청, 음용수감시국, 환경청 등의 규제기관을 수립하여 규제와 서비스를 분리한 독특한 유역물관리체제를 수립하였다. 영국의 유역물관리체제는 2000년 유럽연합물관리지침의 도입으로 10개 유역을 11개의 유역으로 재편하고 국가소통위원회, 유역소통위원회 14개, 유역파트너쉽 100개 등의 기구를 설치하여 유역거버넌스를 강화하였다. 프랑스는 1964년 새로운 물법 도입을 통해 전국을 6개 대유역으로 나누고 각 유역에 유역관리청과 유역위원회를 설치하여 본격적인 유역물관리제도를 수립하였다. 초기에는 유역관리 조직과 지방정부 간의 알력이 상당하여 수도요금에 자동부과되는 약 19%에 달하는 물세에 대한 거부감이 상당하였다. 그런데 이러한 물세가 유역관리청의 관리로 물관리 사업을 위한 펀드로 조성되고 물관리 사업 시행 시 대규모 자금을 조달할 수 있다는 실효성이 입증되면서 점차 유역관리제도가 정착할 수 있게 되었다. 프랑스는 2000년 유럽연합물관리지침의 도입으로 기존의 6개 대유역으로 관리하던 것을 13개 유역으로 재편성하였고 유역감독관 제도를 신설하여 중앙의 감독을 강화하였으며 유역관리청과 유역위원회는 더욱 강화된 거버넌스를 기반으로 효율적인 물관리를 시행하고 있다. 영국과 프랑스 사례는 한국의 유역물관리제도 수립과 운영을 위해 다음과 같은 시사점을 준다. 첫째, 2019년 시행을 앞둔 유역물관리위원회의 구성, 운영 및 역할 등에 대해서는 큰 범위에서 합의를 이뤄야 하겠지만 안정적인 운영과 사업 시행을 위해서는 긴 시간이 필요하다는 점이다. 따라서 인내심과 여유를 갖고 임하되 필요한 원칙은 면밀한 검토와 합의를 통해 세워야 할 것이다. 둘째, 거버넌스의 중요성이다. 영국 사례와 같이 이해당사자 간의 대화와 타협은 중앙정부가 주도하는 것이 아닌 유역, 지방, 도시 등에서의 이해당사자들이 함께 이룩해야 한다. 셋째, 유역관리조직을 위한 건전한 재정확보이다. 프랑스의 예와 같이 유역물관리 조직의 독립성은 재정적 독립이 근본이 되어야 하고 이것은 독립재정을 확보하여 중앙 혹은 기타 유역/지방 조직의 간섭을 피해야 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.312-312
• /
• 2023

동진강 유역은 김제평야를 품고 있어 다른 지역에 비해 농지면적이 차지하는 비중이 크며, 이에 따라 전체 용수 사용량에서 농업용수의 비중이 절대적으로 높은 유역이다. 낙양 보는 동진강 중·상류에 위치한 이수시설로 상류에 위치한 섬진강댐과 같이 동진강 유역의 농업용수 공급에 중요한 역할을 하고 있다. 낙양 보는 현재 동진강 방수문 4문, 김제간선 취입수문 2문, 정읍간선 취입수문 1문이 설치되어 있다. 관개기에는 동진강 도수로의 수문을 폐쇄하여 동진강 본류로의 하천유지용수를 차단하고 김제 배수로의 수문을 운용하여 농업용수를 공급하고 있으며 수혜구역의 용수수요 변화 및 기상상황, 하천상황에 따라 탄력적으로 운영하고 있다. 이러한 가동 보 운영으로 인하여 다양한 수위-유량관계의 변동성이 발생한다. 본 연구에서는 가동 보 운영에 따른 수위-유량관계 곡선식의 변동성을 확인하기 위해 동진강 유역 낙양보 상류에 위치한 정읍시(거산교)관측소를 대상관측소로 선정하였다. 정읍시(거산교)관측소는 2012년에 개발된 수위-유량관계곡선을 2021년까지 사용하였고, 2022년 수위-유량관계곡선식 검증과 재개발을 위하여 유량측정을 실시하였다. 2012년에 개발된 수위-유량관계곡선은 검토 결과 강우에 의한 수위 상승시 보 완전 개방 상태의 측정성과를 확보하여 수위-유량관계 곡선식을 개발하였다. 그 결과 가동 보를 운영하는 3월~9월은 상류에 위치한 정읍시(행정교)관측소와 상하류 역전 현상이 발생하였고, 매년 비정상적인 유량이 산정되는 결과를 초래하였다. 2022년 신뢰도 높은 유량자료와 수위-유량관계곡선식 개발을 위해 낙양 보 완전개방 및 부분개방에 따른 다양한 유량측정성과와 낙양 보 수문 모니터링 결과를 확보하였다. 낙양 보는 2022년 1월~3월, 10월~12월은 수문 6문을 완전 개방하여 동진강에 하천유지용수를 공급하고, 4월부터 동진강 방수문을 폐쇄하여 농번기 농업용수를 확보한 후, 5월~9월에 확보된 농용수를 김제 배수문 2문을 부분개방하면서 공급하는 방식이다. 이 기간동안 낙양 보 수문에 대한 모니터링을 위해 정읍시(거산교)관측소 수위자료에 대한 검토를 실시하였으며, 유량측정시에는 정확한 유량측정성과와 곡선식 확인을 위하여 동일한 위치에서 측정을 수행하였다. 또한, 수위 또는 유량이 변하는 구간은 연속측정을 실시하였으며, 모니터링 결과와 유량측정성과를 바탕으로 수위-유량관계 변화를 분석하였다. 그 결과 저수위1식은 수문 완전개방, 저수위2식은 수문 완전폐쇄, 저수위3~6식은 수문 부분개방 곡선식을 개발하였으며, 저수위 구간은 낙양보 운영에 따라 총 27차례 기간분리가 발생하였다. 결과적으로 본 연구에서는 낙양 보 운영에 따른 다수의 유량측정성과와 모니터링 자료를 확보하였으며, 확보한 유량측정성과의 분석을 통한 신뢰도 높은 수위-유량관계곡선식을 개발하였고 이를 통해 생산된 유량자료는 정확도가 매우 높은 것으로 분석되었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.3
• /
• pp.30-37
• /
• 2023

The PSCB girder bridge is a closed cross-section in which the top and bottom flanges and the web are integrated, and the structural characteristics are generally different from the bridges in which the girder and the floor plate are separated, so a maintenance plan that reflects the characteristics of the PSCB girder bridge is required. As a result of analyzing damage types by collecting detailed safety diagnosis reports of highway PSCB girder bridges, most of the deterioration and damage occurring during use is concentrated on the top flange. In particular, cracks in the bridge direction on the underside of the top flange occurred in about 70 % of the PSCB girder bridges to be analyzed, and these cracks were judged to be caused by indirect loads such as heat of hydration and drying shrinkage rather than structural cracks caused by external loads. In order to improve durability and reduce maintenance costs of PSCB girder bridges in use, it is necessary to control restraint drying shrinkage cracks from the design stage. Therefore, in this paper, the cracks caused by drying shrinkage under restraint, which is the main cause of cracks under the flanges of the top part of the PSCB girder bridge, were directly calculated using the Gilbert Model, and the influencing factors such as the amount of reinforcing bars, diameter and spacing of reinforcing bars were analyzed. As a result of the analysis, it was found that the crack width caused by restraint drying shrinkage exceeded the allowable crack width of 0.2 mm for reinforcing bars with a reinforcing bar ratio of 0.01 or less based on the H16 reinforcing bar and a reinforcing bar with a diameter greater than H19 based on the reinforcing bar ratio of 0.01. Finally, based on the results of the crack width review, a method for controlling the crack width of the top flange of the PSCB girder bridge was proposed.