• Title/Summary/Keyword: 상정조직

Search Result 30, Processing Time 0.03 seconds

Preparation of strip-cast alloys for high performance Nd-Fe-B sintered mangnets (고특성 Nd-Fe-B 소결자석 제조용 strip-cast 합금의 제조)

  • 이대훈;장태석;임태환
    • Proceedings of the KAIS Fall Conference
    • /
    • 2002.05a
    • /
    • pp.52-54
    • /
    • 2002
  • 본 연구는 고특성 소결자석 제조용 strip-cast 합금을 개발하기 위한 기초단계 연구로서 파양한 조건을 통해 strip-cast 합금을 제조한 후, 제조조건이 합금의 미세조직 형성에 미치는 영향을 조사하였다. 조성이 Nd/sub 15/Fe/sub 77/B/sub 8/인 strip-cast 합금을 다양한 방법으로 제조한 결과, wheel speed 즉, 냉각속도가 5 m/s 이하에서 strip 표면에 수직한 방향으로 수지상정이 잘 발달한 것을 발견하였으나, 그 이상의 냉각속도에서는 수지상정이 붕괴되며 미세한 결정질로만 구성된 것으로 관찰되었다. 따라서 잘 발달된 수지상정을 얻기 위해서는 냉각속도를 5 m/s로 유지해야 함을 알 수 있었다 이 때 수지상정간 간격은 약 4-7㎛로써 고특성 소결자석의 기준에 잘 부합되었다. 한편 XRD 분석결과, 냉각속도 5 m/s이하에서는 <001> 방향으로 뚜렷하게 preferred orientation이 일어난 것을 확인하였으며, 이것은 strip 합금의 분쇄 및 소결시에 결정립 배향성에 유리하게 작용하여 최종 소결자석의 자기적 특성 향상에 기여할 것으로 예상된다.

Effect of Small Additives on the Microstructure of Strip-Cast Nd-Fe-B Alloys (소량의 첨가원소가 Strip-Cast Nd-Fe-B 향금의 미세 조직 형성에 미치는 영향)

  • Lee, D.H.;Jang, T.S.;Kim, D.H.;Kim, Andrew-S.
    • Journal of the Korean Magnetics Society
    • /
    • v.14 no.5
    • /
    • pp.196-200
    • /
    • 2004
  • In order to improve dendritic formation of Nd$_2$Fe$\_$14/B phase in the strip-cast Nd-Fe-B alloys that are frequently used for production of high energy sintered magnets, effect of small substitutional additives such as Cu (0.3~1.0 at. %) and Co (0.5~1.5 at.%) on the phase formation and microstructures of the strip-cast alloys based on Nd$\_$14/Fe$\_$80/B$\_$6/ were investigated. As the amount of Cu addition increased, formation of Nd$_2$Fe$\_$14/B dendrites along the direction normal to the strip surface was suppressed with the reduction of the strip thickness mainly due to the increase of fluidity of the melt. However, both the dendrites and their <001> preferred orientation along the direction normal to the strip surface were improved with the increase of the strip thickness as the amount of Co addition increased. The dendrites became finer after small amount of Cu or Co was added. While small copper additions tended to stabilize the formation of primary Fe, small cobalt additions suppressed it. When small amount of Zr was added, however, the dendrite structures were totally collapsed with excessive grain growth of Nd$_2$Fe$\_$14/B.

A Study on the Corrosion Mechanism by the Moisture on the Surface Layer of the Alloys Coated Steel Sheet (합금도금강판의 수적에 의한 표면층의 부식기구에 관한 연구)

  • Kim, Y.H.;Kim, S.K.;Jeon, E.C.
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.1 no.1
    • /
    • pp.71-78
    • /
    • 2002
  • Since the early 1980's the use of zinc-aluminum alloy-coated steel sheet(Galvalume) for vehicular corrosion protection has increased drastically. It is consisting of 55%Al-43.4% Zn-1.6%Si. Galvalume has a good corrosion resistance, heat reflectivity and shiny appearance, which has a dendritic structure of alloy layer. It has a good corrosion resistance due to dendritic structure. But, this also has a weak point against moisture during long period of transportation as sheeted and or coiled without any relation of chromating on the surface of steel sheet or not because of high humidity and temperature. Here, We studied the corrosion mechanism by the moisture.

  • PDF

Trend and verification measures of certification evaluation in control system (제어시스템 인증평가 동향 및 검증방안)

  • Ueda, Osamu
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2016.04a
    • /
    • pp.259-262
    • /
    • 2016
  • 최근 중요 인프라 업계에서 주로 다뤄지는 제어시스템을 표적으로 한 사이버 공격으로 Stuxnet에 이어 Havex RAT, BlackEnergy2 라고 하는 멀웨어(Malware)를 이용한 사건이 많이 증가하고 있다. 제어시스템의 새로운 공격 방법에 대한 대책으로 시스템 입구와 내부조직에 대한 대책을 강화하기 위한 필요성이 요구되어 왔지만 그러한 대책은 한정되어 있다. 본 논문에서는 보안대책에 필요한 인증 취득에 있어서 기준이 되는 국제 표준인 ISASecure(R)EDSA 인증제도에 착목했다. 인증평가는 요구요건이 중복되는 불필요한 인증평가 작업을 최소화 하는 것으로 인증 취득 시 발생되는 코스트를 절감할 수 있으며 기존의 정보 보안 관리체계(lSMS)의 인증을 취득하고 있는 기업이나 조직이면 제어시스템의 인증 기준으로 추가된 차분 요건만으로 취득이 가능 할 수 있을 것으로 상정된다. 이러한 제어시스템의 보안을 구현하기 위해 IACS(Industrial Automation and Control System)에서 표준화로 제정한 IEC62443 시리즈를 참조하여 세계각국에서 사용되는 제어시스템을 대상으로 인증(EDSA) 요구사항의 차분을 도출하는 수법을 제안하고자 한다.

일본의 '산업 클러스터 계획 프로젝트' 의 성공요인과 시사점 - TAMA 클러스터의 사례를 중심으로 -

  • 류태수
    • Proceedings of the Technology Innovation Conference
    • /
    • 2005.08a
    • /
    • pp.141-167
    • /
    • 2005
  • 본 연구의 목적은 우리나라보다 앞서 실시하고 있는 일본의 산업 클러스터 계획 프로젝트의 거시적인 현황과 가장 성공적이라고 하는 TAMA클러스터의 사례를 분석하여 향후 우리나라 클러스터 정책 시행에 필요한 시사점을 얻는데 있다. 특히 TAMA클러스터의 성공은 이를 직접 관리하고 있는 민간차원의 중개조직인 TAMA산업활성화협회의 운영전략을 집중적으로 분석하여 봄으로써 도입 가능성에 대한 진단과 정책적 제안을 하고자 한다. 첫째, 일본의 19개 지역별 산업 클러스터 계획의 공통점은 어느 것도 도도부현의 영역을 초월한 광역적인 클러스터를 형성하고 있다. 광역단위의 집적은 상대적으로 클러스터 계획에 대한 중요성과 실행주체를 망각하기 쉬워 실패할 가능성이 비교적 높을 수 있다 이러한 점을 극복하기 위한 대안으로 산학연의 3주체 간 연계를 주로 담당하는 민간중심의 중개조직을 두어 운영하고 있다. 둘째, 클러스터 정책기간은 시작에서 자립까지 20년을 상정하고, 제1기 5년간은 산업 클러스터 네트워크 구축기, 제2기 5년은 산업 클러스터 성장기 그리고 마지막 제3기 10년은 산업 클러스터의 자율적 발전기로서 책정되어 수행하는 것이 바람직하다고 보고 있다. 셋째, 개별적인 산업 클러스터의 비전, 목표, 중장기 전략의 올바른 수립이 필요한데 백화점식이 아닌 대상산업 및 대상 주체에 대한 선택과 집중의 전략성이 엿보인다. 넷째, 정책 대상의 범위는 연구개발에서 판매에 이르기까지 전 비즈니스 프로세스를 대상으로 하고 있으며 클러스터 관련 정책수행 주체들의 정책조율, 중복 투자의 회피 그리고 효과적인 정책을 시행하기 위하여 수평적인 연락망과 협의체를 구성하고 있다. 다섯째, TAMA협회는 전통적인 동종 산업중심의 협회 기능과는 달리 제품개발형 중소$\cdot$중견기업을 대상으로 신기술개발과 신사업 전개를 위한 전략적 지원을 하고 있다. 비교적 개별적인 기술개발 능력은 물론 독자적인 마케팅 능력을 갖고 있어 일반적인 보호 대상자로서의 중소기업과는 차원이 다르며 기존의 하청관계라는 수직적 의존적인 존재가 아니라 세계적으로 니치 시장에서 경쟁력을 가지고 있는 대기업과 대등한 입장의 우량기업이라는 것이 특징이다. 여섯째, 지금까지는 기업을 지원하는 각 기관들이 각각 독자적으로 운영하여 경영자원의 분산과 이용으로 수혜자인 중견$\cdot$중소기업의 입장은 물론 지방자치단체 및 중앙정부의 차원에서 분석하여 볼 경우 경영자원의 Critical Mass를 확보하기 어려웠다. TAMA협회는 네트워크 조직으로서 주로 소프트적인 지원을 통하여 원활하게 수행하고 있음. 정보와 네트워크만을 가지고 조직간 관계를 중개하는 가벼운 네트워크 조직으로서 운영하는 방법은 한국의 경우에도 적용이 가능하며 매우 유용하다고 생각된다.

  • PDF

A Feasibility Study on the Brazing of Zircaloy-4 with Zr-Be Binary Amorphous Filler Metals (비정질 이원계 합금 Zr-Be 용가재를 이용한 지르칼로이-4의 브레이징 타당성 검토)

  • 고진현;박춘호;김수성
    • Journal of Welding and Joining
    • /
    • v.17 no.4
    • /
    • pp.26-31
    • /
    • 1999
  • An attempt was made in this study to investigate the brazing characteristics of Zr-Be binary amorphous alloys for the development of a new brazing filler metal for joining Zircaloy-4 nuclear fuel cladding tubes. This study was also aimed at the feasibility study of rapidly solidified amorphous alloys to substitute the conventional physical vapor-deposited(PVD) metallic beryllium. The $Zr_{1-x}Be_{x}$($0.3\leq$x$\leq0.5$) binary amorphous alloys were produced in the ribbon form by the melt-spinning method. It was confirmed by x-ray diffraction that the ribbons were amorphous. The amorphous. the amorphous alloys were used to join bearing pads on Zircaloy-4 nuclear fuel cladding tubes. Using Zr-Be amorphous alloys as filler metals, it was found that the reduction in the tube wall thickness caused by erosion was prevented. Especially, in the case of using $Zr_{0.65}Be_{0.35}$ and $Zr_{0.7}Be_{0.3}$ amorphousalloys, the smooth and spherical primary $\alpha$-Zr particles appeared in the brazed layer, which was the most desirable microstructure from the corrosion-resistance standpoint.

  • PDF

A Study on User Satisfaction of PDA in Postal Service (우정 사업 본부 내 PDA 사용자 만족에 관한 연구)

  • 김미혜;김용영
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.5 no.2
    • /
    • pp.150-160
    • /
    • 2004
  • This study investigates the influential factors for the user's satisfaction in usage of PDA in Korea Postal Services. This is the case of user's acceptance of information technology that organization mandatorily implements for the sake of employee's productivity. The factors examined in this study include system quality, information quality, perceived usefulness, user satisfaction, and compatibility with work. All these factors were found significant for users satisfaction. Especially, we notice the close relationship between compatibility with work, perceived usefulness, and user satisfaction in case of nonvolitional IT usage.

  • PDF

Effects of cooling rate on Microstructure and Bond Strength in WC-Co/Cu/SM45C steel joint (WC-Co/Cu/SM45C강접합에 미세조직 및 접합강도에 미치는 냉각속도의 영향)

  • 정승부;양훈모
    • Journal of Welding and Joining
    • /
    • v.17 no.2
    • /
    • pp.104-111
    • /
    • 1999
  • The interfacial microstructure and bond strength were examined for WC-Co/Cu/SM45C steel join using a nickel-plated copper in vacuum at 1323K for 0.6ks∼3.6ks. After bonding, microstructure in bonding interface was observed by OM(Optical Microscopy), SEM(Scanning Electron Microscopy) and EPMA(Eelectron Probe Micro Analyzer). The oil cooling was carried out at 353K, the cooling rate in air and furnace was 22K/s and 4.4K/s. respectively. It was found that dendritic widths increased with the content of cobalt and bonding times at 1323K. As a whole, bond strength values at the same bonding condition decreased in this order: WC-13wt.%Co/SM45Csteel. WC-8wt.%Co/SM45Csteel and WC-4wt.%Co/SM45Csteel. The bond strength of WC-13wt.%Co/S45C steel joint in oil cooling was 273MPa. This value was greatly higher than those of 125MPa in furnace cooling and 93MPa in air cooling at 1323K for 0.6ks. The bond strength values were found to be closely associated with the content of cobalt in WC-Co and cooling rate.

  • PDF

정보보호 거버넌스 국제표준화와 국내 도입 사례 연구

  • Kim, Jungduk;Lee, Seong Il
    • Review of KIISC
    • /
    • v.22 no.6
    • /
    • pp.9-14
    • /
    • 2012
  • 정보보호 활동에 대한 이사회 및 최고경영층의 역할과 책임을 강조하는 거버넌스에 대한 이슈가 최근 공공기관 및 민간기업 공히 화두로 등장하고 있다. 조직 내 정보보호가 효과적으로 수행되기 위해서는 무엇보다도 정보보호에 대한 주요 방향 제시와 통제 기능을 수행하는 최고경영층의 리더십과 지원체계가 핵심성공요인이라는 것을 인식하기 시작한 것이다. 이러한 정보보호의 새로운 패러다임을 반영하여 현재 정보보호 거버넌스에 관한 국제표준화 작업이 완성단계에 있어 2013년에는 국제표준으로 발표될 예정이고, 국내 KS 표준으로도 상정될 예정이다. 또한 최근 금융권을 비롯하여 정보보호 거버넌스 도입을 위한 프로젝트가 수행되었다. 본 연구에서 국제표준의 내용을 중심으로 거버넌스를 위한 원칙과 프로세스를 소개하고, 국내 정보보호 거버넌스 도입 사례 연구를 통해 거버넌스의 현 수준을 살펴보고 향후 추진되어야 할 과제를 제시하고자 한다.

Multi-Label Classification for Corporate Review Text: A Local Grammar Approach (머신러닝 기반의 기업 리뷰 다중 분류: 부분 문법 적용을 중심으로)

  • HyeYeon Baek;Young Kyun Chang
    • Information Systems Review
    • /
    • v.25 no.3
    • /
    • pp.27-41
    • /
    • 2023
  • Unlike the previous works focusing on the state-of-the-art methodologies to improve the performance of machine learning models, this study improves the 'quality' of training data used in machine learning. We propose a method to enhance the quality of training data through the processing of 'local grammar,' frequently used in corpus analysis. We collected a vast amount of unstructured corporate review text data posted by employees working in the top 100 companies in Korea. After improving the data quality using the local grammar process, we confirmed that the classification model with local grammar outperformed the model without it in terms of classification performance. We defined five factors of work engagement as classification categories, and analyzed how the pattern of reviews changed before and after the COVID-19 pandemic. Through this study, we provide evidence that shows the value of the local grammar-based automatic identification and classification of employee experiences, and offer some clues for significant organizational cultural phenomena.