• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.10
• /
• pp.1754-1762
• /
• 2001

본 연구의 목적은 적합성과 기능성이 고려된 체형별 남성 상의 원형 패턴을 개발하는데 있다. 피험자는 인체계측자료와 측면체형 사진에 의해 선정하고, 체형은 굴신체형, 표준체형, 반신체형으로 분류하였다. 체형별 실험 원형 패턴의 평가를 위하여 기존원형을 선정하였으며, 연구 결과는 다음과 같다; 1. 착의평가 결과 표준체형은 대부분의 항목에서 적합하였으나, 굴신체형과 반신체형에서는 많은 차이가 있었다. 이러한 차이는 앞길이와 등길이 뿐만 아니라 여유량과 윗 가슴둘레에 서 나타난다. 앞품과 뒤품은 외관에 의해 많은 영향을 받으며, 증가된 옆품은 앞품과 뒤품의 부족분을 보충하는 역할을 하였다. 따라서 실험패턴은 기존패턴보다 각 체형에 더욱 적합하며, 체형 적합성과 동작기능성이 고려된 의복 제작을 위한 패턴설계는 인체의 구조와 동작연구에 의해 가능하였다. 2. 기본원형 패턴 설계를 위한 필요치수는 목뒤높이, 등길이, 앞길이, 윗 가슴둘레, 앞품과 뒤품이며, 체형분류의 기준은 윗 가슴둘레, 앞품, 뒤품, 앞길이, 등길이이다. 이와 같은 결과를 근거로 가슴둘레 선은 [(B/2+B/10), 뒤진동깊이는 [(B/10+목뒤높이/10)]로 설정하고, 앞내림은 1.5cm로 하였다.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.205-210
• /
• 2020

The purpose of this study is to propose grading increments chart for women's bodice sloper in their 20s in order to increase consumer satisfaction with apparel products. The selected bodice sloper is a compromise between the German Müller bodice sloper and the Japanese Munhwa bodice sloper. Based on National Standards Position Survey data, the main dimension average for women in their 20s was set. The grading increments was set at the grading deviation application area in bodyboard and sleeve. Thereafter grading was done and the suitability of the graded pattern was checked.

• Journal of Fashion Business
• /
• v.27 no.3
• /
• pp.96-114
• /
• 2023

In modern society, there is a tendency to prioritize both fashion and comfort, with a preference for loose-fit clothing that enhances mobility. While darts may not be visibly present on the garment's exterior, their effects should be dispersed and incorporated into the design. However, there is a significant lack of systematic research on dartless patterns in the current state. Therefore, this study focuses on investigating dartless patterns used in loose-fit clothing tailored to the body measurements of women in their 20s. The objective of this research is to develop foundational dartless patterns that serve as a basis for diverse design possibilities in loose-fit clothing. To achieve this purpose, seven dartless patterns introduced in clothing construction references were selected for the production of experimental prototypes, which were then subjected to visual evaluations by a panel of experts. Based on the evaluation results, superior patterns were selected and they underwent modification and improvement to develop the research patterns. The developed research patterns were derived through the formulation of calculation formulas, and based on these formulas, garments were produced. Subsequently, a second round of visual evaluations was conducted by a panel of experts, and notable improvements were observed in most of the aspects assessed. However, it should be noted that this study was limited to women in their 20s it did not explore a wide range of fabrics. Therefore, further research is needed in the future.

• Journal of Fashion Business
• /
• v.20 no.5
• /
• pp.45-59
• /
• 2016

This research is a study to develop basic block patterns for adult males. The subjects were 20 men in their 20s, and we tested 6 basic bodice blocks that are used in academia and industry. First, a comparative analysis of the patterns of the bodice blocks was conducted and the test garments were made, and then their appearances were evaluated during wearing tests. Based on the test results, we intended to select a bodice block that is a good fit when it is put on and to use it as basic data in order to design a man's bodice block for the future. The research results are as follows: First, a comparison of the 6 bodice block drafts showed that they used differently calculated ease allowances at chest circumference and width, waist circumference, shoulder length, etc. for which the upper chest circumference is used as a reference. Second, when the appearances of the test garments were tested, the average scores were high in the order of B> H> P> K> M> L. Pattern B was superior in the areas of the neck circumference and shape, ease allowance at the back of the neck, circumference of the front of the neck, location of side width, ease allowance at sides, armhole width and depth. But in the other test items, there were cases where other patterns were superior.

• The Research Journal of the Costume Culture
• /
• v.5 no.3
• /
• pp.176-183
• /
• 1997

To develop the bodice pattern of the master size of the established size chart which was suggested in the former studies, the wearing experiment was practiced. According to the result, developed pattern design in this study boys\` bodily characteristics were reflected fully. And especially, New pattern design method was suggested at chest circumference, neck circumference, arm circumference, chest breadth, and center front line. The study results were put into the database in order to apply apparel CAD system, and they could be easily used in standardization work of design pattern.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.6
• /
• pp.95-107
• /
• 2022

This study attempted to develop a bodice prototype suitable for the 20's obese male's trunk with a BMI of 25kg/m² or more, which is distinguished from the standard body type. Through this, it was intended to provide data to help the development of clothing for obese males. Patterns such as front bodice shoulder line and front sagging were modified through primary appearance and garment pressure evaluation. Through the second evaluation, corrections such as back armhole, back waistline, and front sagging were performed. Through the third evaluation, the final pattern drafting method was developed by removing the front sagging added through the second evaluation. In the case of obese male body types in their 20s, a drafting method distinguished from the standard body type was required in the method of setting the front and back waist lines, back armhole darts, and front shoulder lines due to protruding and posture of the abdomen. This study was meaningful in that it presented a bodice prototype drafting method suitable for the 20s obese males. In the follow-up study, it is thought that actual clothing experiments and studies to develop clothing patterns by applying them to obese male tops in their 20s should be conducted.

• Journal of Fashion Business
• /
• v.25 no.3
• /
• pp.144-158
• /
• 2021

The purpose of this study is to develop a bodice block suitable for women in their 20s with turtle neck syndrome. The problem of turtle neck syndrome body type was derived through the evaluation of bodice blocks. First, the length of the front bodice was longer and the length of the back bodice was shorter. Second, the front neck point, back neck point, and the shoulder line were not in place. Third, the side neck was pushed up. Fourth, the length of armhole was long and it floated. Fifth, the front hem was attached to the body and the back hem was away from the body. A finally developed pattern was designed by developing four test patterns to solve the problem that appeared in a selected bodice pattern, and a t-test was conducted to determine the difference in the appearance evaluation by virtual clothing between the two patterns, bodice block and the development pattern. According to the result, the fit was not good from the side body because the position of the side neck point was not in a place due to the characteristics of the body shape of turtle neck syndrome, but the problems of the anterior neck position, the position of the back neck point, the shoulder line position, and the armhole shape were improved in the developed pattern.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.999-1011
• /
• 2008

To most of the students studying fashion related major, the graduation fashion show is a big challenge. They have to put together all they learn and show what they can do to their future employers. They design, pattern work, and make up garments for the show all by themselves. Unfortunately. while they make up their garments, they usually don't Dow exactly body measurements of the models. So quite often they have to alter their art works up to the last minute of the fashion show opening. Sometimes such unadequate work process ruins their work. The purpose of this study is to suggest block patterns of Korean fashion models measurements for basic items, such as jacket and pants for male models and torso length block pattern, skirt and pants for female models. 20 male and 20 female professional models were measured. The block patterns were based on their measurements. After the first fitting test, patterns were corrected by their body characteristic. For both male and female models, it was found desirable to fix the shoulder width and make an adjustment to the patterns with a deviation of width and girth items. In case of the resultant patterns the satisfaction was made better. Model sizes proposed in this study are considered closer to the size of average models, since they were based on A-grade models who are currently working in Korea. The resultant patterns can be produced by simply making a slight adjustment to the width of the proposed pattern in this study.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.2
• /
• pp.101-107
• /
• 1992

디입그로잉용 냉간 압연 강판의 인장시험편에 디지탈 이미지 프로세싱 기술을 적용하여 표면에서의 변형 및 변형도 분포 구하는 방법을 제안한다. 이 방법은 시편표면상의 절점 위치를 이미지 프로세싱에 의해 결정하는 부분과 이들 위치점들을 이용하여 변형도를 계산하는 두 부분으로 구성되어,있다. 본 연 구에서는 시편상의 각 절점 위치를 구하기 위해 검은 원형의 반점들로 배열된 사각 형상의 격자를 사용하 였고, 이미지 프로세싱에 의해 구해진 절점 좌표를 이용하여 소재 표면에서의 변형 패턴, 주 변형도 분포, 유효 변형도 분포, 임계 변형도 등을 구하였다. 인장시험하는 동안 시편 표면상의 국부 네킹이 발생될때 까지 주변형도에 의한 변형 이력은 거의 적선적으로 변형되고 있기 때문에, 유효 변형도 값은 매 변형 단계마다 변형도 증분의 누적에 관계없이 거의 일정한 값을 보여주고 있었으며, 최대 유효 변형도는 시편의 중앙부에서 나타나고 있음을 알 수 있었다.

• Journal of Mushroom
• /
• v.2 no.3
• /
• pp.115-126
• /
• 2004

Somatic hybrids of inter-compatible and inter-incompatible strains were obtained by protoplast fusion. The fusion products between compatible strains, Pleurotus ostreatus and P. florida, formed heterokaryons, while fusants between incompatible strains such as P. cornucopiae + P. florida, P. ostreatus + Ganoderma applanatum, P. florida + Ganoderma lucidum, and P. ostreatus + Flammulina velutipes formed synkaryons that retained genes from both parents. The heterokaryons showed the same level of basidioma development. In contrast, the synkaryons showed unique characteristics including clamp connection formation at mitosis, either partner basidioma development, and abnormal segregation and recombination compared with inter-compatible strains. Synkaryons can be classified into homokaryoyic and heterokaryotic type. A comparison of somatic hybrids with compatible and incompatible strains was made using random amplified polymorphic DNA (RAPD) analysis. The heterokaryons between compatible species showed the same level of variability and contained both parental RAPD bands. In contrast, most of the synkaryons between incompatible species showed similarity to those of either parental bands and non-parental RAPD bands. Synkaryons can be classified into microgenome insertion type and macrogenome insertion type. A tetrapolar mating system was found among monospore isolates in somatic hybrids and wild type P. ostreatus. Homokaryons from each somatic hybrid combination were paired with tester homokaryons of the initial wild type of P. ostreatus. The changed mating types were identified in progenies. The pattern of mating type switching in somatic hybrids depends on compatibility of fusion partner. There are several factors related to the mechanism of clamp connection formation and fruiting body development of synkaryons. Of these,the major factor may be associated with self-fertility and mating type switching such as homokaryotic fruiting of wild type P. ostreatus. This review will discuss these aspects.