• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.1
• /
• pp.37-46
• /
• 1994

The purpose of this study was to evaluate the effect of various cements on the retention of casting crown and the cement film thickness. To evaluate the retention of crown, thirty maxillary premolars were used and prepared to largely same dimension. According to the routine method, Non-precious metal crowns were made. The teeth and the metal crowns were divided into three groups and cemented under 5kg static pressure. Group I was composed of 10 teeth and 10 metal crowns and was cemented with zinc phohsphste cement. Group II was composed of 10 teeth and 10 metal crowns and was cemented with Panavia-EX cement. Group III was composed of 10 teeth and 10 metal crowns and was cemented with All-Bond & composite resin cement. After 5 days, the cemented specimens were mounted and the failure loads were measured by an Instron Universal Testing Machine. To evaluate the cement film thickness. 5 metal teeth and 5metal crowns from a prepared maxillary premolar were made. Two marks were flawed on the margin part of each surface at 4-surfaces of each specimen(one mark : crown, the other : metal tooth) and were measured the width with SEM photograph(80 sheets) before and after cementation(Panavia-EX, All-Bond cement, & ZPC) was made. Differences of the widths of marks between before and after were measured, and differences from 4-surfaces of a specimen cemented with a cement were measured and calculated. The results were as follows ; 1. There was a statistically significant difference between the failure loads of group III and the others(p<0.05). 2. There was a statistically significant difference between the cement film thickness of group III and the others(p<0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.169-179
• /
• 2004

The purpose of this study was to discriminate clinically and radiographically among the three groups of dentigerous cysts studied. First, Group I, involved area of dentigerous cyst was successive permanent tooth area beneath deciduous tooth. Second, Group II, involved permanent molar area, and the last, Group III involved maxillary anterior supernumerary tooth area. The author observed and compared the clinico-radiographic features of 49 cases of Group I, 36 cases of Group II, and 15 cases of Group III of dentigerous cyst and this observation and comparison had been done by based on the charts and panoramic films. The obtained results were as follows: 1. The cases of Group I were 29 cases and, those of Group II were 36 and those of Group III were 15. 2. The incidence of dentigerous cyst is high in first decade. In Group I, before first decade and early first decade was 87.8%, in Group II and Group III, was discovered more lately. 3. The frequency of dentigerous cyst is 2.5 times higher in male than in female. 4. The sequence of chief complaint was swelling(50%), routine examination(32%), and pain(9%). 5. When considering the type of the cyst, lateral type is many most in Group I (71.4%) and central type is many most in Group II (94.4%) and Group III (100%). 6. The most size of dentigerous cyst was 2 crown size in Group I, 1 crown size in Group II, above of 4 crown size in Group III. 7. Almost involved teeth showed displacement and some tooth of displaced teeth showed delayed root development and dilaceration of root. 8. The most many response of alveolar bone was buccal bone expansion in Group I (67.3%), no bone expansion in Group II(66.7%) and palatal bone expansion in Group III (60.0%). 9. The percentage of involved teeth were as follows : The mandibular third molar was 31% and many most. The mandibular second premolar was 30%. Mesiodens of maxillary anterior area was 15%. The maxillary canine was 8%. The mandibular first premolar was 5%. 10. In the Group I, causes suggesting of dentigeous cyst are pulpotomized deciduous tooth(59.2%), severe dental caries of deciduous tooth, untreated traumatic history on the deciduous tooth etc. 11. The treatment method of dentigerous was marsupialization in 61.2% of cases of Group I and that was enucleation in 61.1% of cases of Group II and in 80.0% of cases of Group III.

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.219-237
• /
• 1999

This study was designed to evaluate the frequency and the severity of root resorption of the permanent teeth before orthodontic treatment by means of radiograph in the malocclusion patients. In this study the author analysed the frequency and the severity of root resorption in individual teeth, the relationships of the frequency and the severity of root resorption and age, sex, Angle's classification, overjet, overbite, and maxillary and mandibular incisor inclination, and the relationships of the frequency of root resorption and the characteristics of malocclusion and marked occlusal attrition showed in individual teeth. The results were as follows. 1. All of the persons examined showed some evidence of root resorption in one or more of the permanent teeth, $35.84\%$ of the teeth examined and more frequent in female group than male group(p<0.01). 2. On the susceptibility of the root resorption in individual teeth in this study, the author found the mandibular incisors and the maxillary incisors, in the order named, to be most susceptible in all affected teeth, but maxillary central incisors, maxillary first bicuspids, and maxillary lateral incisors, in the order named, were more susceptible to marked root resolution. 3. The more proclined maxillary Incisors the more affected root resorption in four maxillary incisors and the more proclined mandibular incisors the more affected root resorption in four mandibular incisors. 4. Overbite more affected root resorption than overjet, and the higher tender to openbite the more frequent was root resorption. 5. On the characteristics of malocclusion showed in individual teeth, the openbite teeth combined with crossbite, were most frequent in root resolution.

• The korean journal of orthodontics
• /
• v.31 no.5 s.88
• /
• pp.505-515
• /
• 2001

The purpose of this study was to measure the average tooth size of Korean with normal occlusion. According to the study, the average tooth ratios between the upper and lower teeth which could assure the proper ovebite, overjet and good interdigitation were calculated. The normal occluson sample of this study consisted of 43 Korean male adults and 51 Korean female adults. Among them, 22 Korean male adults and 51 Korean female adults were from KAO(Korean Association of Orthodontists), 21 Korean male adults were from Department of Orthodontics, College of Dentistry, Yonsei University. The results from this study were as follows : 1 The average tooth size of Korean Norm classified by male and female was measured. 2. The average tooth size of Korean male adults with normal occlusion was significantly larger than that of Korean female adults except upper and lower first molars. (p<0.05) 3. The tooth ratio which could Predict the proper overbite and overjet in anterior teeth and proper occlusion in posterior teeth was calculated. 1) Sum of inciosrs = 4:2.97 2) Neff's anterior coefficient = 1.22 3) Bolton's anterior ratio = 78.29%, overall ratio = 91.14% 4. A positive correlation was observed between the sum of lower anterior incisors and the sum of unilateral canine and premolars In each jaw. Based this correlation, the regression equation was made which could Predict the sum of unerupted unilateral canine and premolars in mired dentition. 1) Sum of unilateral unerupted upper canine and premolars' width = 10.435018 + 0.513346 ${\times}$ (sum or lower 4 incisors' width) 2) Sum of unilateral unerupted lower canine and premolars' width = 9.654002 + 0.502565 ${\times}$ (sum of lower 4 incisors' width)

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.143-157
• /
• 2000

To investigate the developmental stages of dental and skeletal maturation by ages and the correlations among dental maturity, skeletal maturity of cervical vertebrae, and that of hand-and-wrist, the author used the cephalograms, orthopantomograms, and hand-and-wrist radiograms of 1055 patients (male 458, female 597) aged 7 to 20 years old. In the cephalograms, the skeletal maturity stages of each bone were mainly assessed by Hassel and Farman's cervical vertebrae maturation indicators (CVMI) method. In the orthopantomograms, the dental maturity stages of each tooth were mainly assessed by Nolla's tooth calcification stages method. In the hand-and-wrist radiograms, the skeletal maturity stages of each bone were mainly assessed by Fishman's skeletal maturity indicators (SMI) method. The results were as follows. 1. There was a high correlation among dental maturity, skeletal maturity of cervical vertebrae, and that of hand-and-wrist in the both sexes (P<0.001). 2. There was a high correlation (r=0.91-0.93) between skeletal maturity of cervical vertebrae and that of hand-and-wrist. 3. There was a high correlation (r>0.8) between skeletal maturity of hand-and-wrist and maturity of upper and lower canine, first premolar, and second premolar. 4. There was high a correlation(r=0.8) between skeletal maturity of cervical vertebrae and maturity of upper canine. 5. By the ages, dental maturity, skeletal maturity of cervical vertebrae, and that of hand-and-wrist were obtained in the both sexes. In summary, dental maturity, skeletal maturity of cervical vertebrae, and that of hand-and-wrist we of sufficient diagnostic worth as an index to predict adolescent growth.

• The korean journal of orthodontics
• /
• v.31 no.4 s.87
• /
• pp.467-477
• /
• 2001

This investigation was designed to determine the effects of wire size, bracket width and the number of bracket on bracket-wire dynamic frictional resistance during simulating arch wire-guided tooth movement in vitro. For simulation of an arch wire-guided tooth movement, we simulated tooth, periodontal ligament and cancellous bone. Maxillary premolar and 1st molar were simulated as real sized resin teeth, the simulated resin teeth which its root was coated by polyether impression material which its elastic modulus is similar to periodontal ligament were embedded in steel housing with inlay wax which its elastic modulus is similar to cancellous bone. Stainless steel wires in four wire size (0.016, 0.018, $0.016\;{\times}\;0.022,\;0.019\;{\times}\;0.025$ inch) were examined with respect to three (stainless steel) bracket widths (2.4, 3.0, 4.3mm) and the number of medium bracket(one, two, three) included in the experimental assembly under dry condition. The wires were ligated into the brackets with elastomeric module. The results were as follows : 1. In all the brackets, frictional resistance increased with increase in wire size. But, statistically similar levels of frictional resistance were observed between 0.018 inch and $0.016\;{\times}\;0.022$ inch wires in narrow bracket and also between 0.016 inch and 0.018 inch wire in wide backet. 2. The frictional forces produced by 0.016 inch wire were statistically similar levels in all the brackets. In 0.018 inch round wire, wide bracket was associated with lower amounts of friction than both narrow and medium brackets. In $0.016\;{\times}\;0.022,\;0.019\;{\times}\;0.025$ inch rectangular wire, wide bracket produced target friction than both narrow and medium brackets. In all the wirer, narrow and medium bracket demonstrated no statistical difference in levels of frictional resistance. 3. Frictional resistance increased with increase In number of medium bracket. 0.016 inch round wire demonstrated the greatest increment in frictional resistance, followed by $0.019\;{\times}\;0.025,\;0.016\;{\times}\;0.022$ inch rectangular wire which were similar level in increment of frictional resistance, 0.018 inch wire demonstrated the least increment. The increments of frictional resistance were not constantly direct proportion to number of bracket.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.2
• /
• pp.179-191
• /
• 2023

The purpose of this study was to investigate the prevalence and patterns of congenitally missing teeth in permanent teeth excluding third molars, in patients aged 8 to 16 years who visited Pusan National University Dental Hospital from January 2010 to February 2021. This retrospective study evaluated tooth agenesis and the pattern of missing teeth represented by the tooth agenesis code by reviewing panoramic radiographs and electronic medical records of 11,759 patients, including 5,548 females and 6,211 males. The prevalence of congenitally missing teeth was 10.74% (females 11.95%, males 9.66%, p < 0.0001). Patients with tooth agenesis had an average of 2.22 missing teeth, and congenitally missing teeth occurred more frequently in the mandible (8.39%) than in the maxilla (4.52%, p < 0.0001). The mandibular second premolar (58.19%) was the most frequently missing tooth. The second premolar was the most frequently missing tooth in all quadrants (30.10%, 31.67%, 43.14%, and 35.59%) when a single tooth was absent, while the first and second premolars were the most commonly absent teeth (11.69%, 11.47%, 5.94%, and 5.24%) when two or more teeth were missing. In the relationship between maxillary-mandibular antagonistic quadrants and full mouth, the 1st to 4th place of the missing patterns were all involved with the 1st and 2nd premolars. This study can be clinically helpful in establishing a treatment plan for patients with missing teeth. In addition, it can be used as basic data for molecular biological research to find out the relationship between tooth agenesis and specific genes.

• Restorative Dentistry and Endodontics
• /
• v.33 no.1
• /
• pp.28-38
• /
• 2008

This study was to investigate the influence of composite resins with different elastic modulus, cavity modification and occlusal loading condition on the stress distribution of restored notch-shaped noncarious cervical lesion using 3-dimensional (3D) finite element (FE) analysis. The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. A notch-shaped cavity and a modified cavity with a rounded apex were modeled. Unmodified and modified cavities were filled with hybrid or flowable resin. After restoration, a static load of 500N was applied in a point-load condition at buccal cusp and palatal cusp. The stress data were analyzed using analysis of principal stress. The results were as follows: 1. In the unrestored cavity, the stresses were highly concentrated at mesial CEJ and lesion apex and the peak stress was observed at the mesial point angle under both loading conditions. 2. After restoration of the cavity, stresses were significantly reduced at the lesion apex, however cervical cavosurface margin, stresses were more increased than before restoration under both loading conditions. 3. When restoring the notch-shaped lesion, material with high elastic modulus worked well at the lesion apex and material with low elastic modulus worked well at the cervical cavosurface margin. 4. Cavity modification the rounding apex did not reduce compressive stress, but tensile stress was reduced.

• The korean journal of orthodontics
• /
• v.37 no.5
• /
• pp.351-363
• /
• 2007

The aim of this study was to evaluate pulp and periodontal changes following rapid tooth retraction by periodontal distraction after bone undermining surgery in young adult dogs. Methods: Alter extraction of second premolars, the interseptal bone mesial to the upper 3rd premolar was undermined. After activating the distraction appliance at 0.5 mm/day for six days, the dogs were sacrificed at 0, 1, 3, 5, 7, and 9 weeks during the consolidation period. Tissue changes of periodontium and pulp were evaluated radiologically, histologically, and immunohistochemically. Results: Digital subtraction radiography showed active bone formation in the stretched periodontal ligament from 0 - 4 weeks. Resorption of the alveolar bone, appearance of osteoclasts, and infiltration of inflammatory cells were observed just after the activation period at the pressure side, and distinctive bone formation was seen in the tension side of the periodontal ligament from 1 week. New bone formation was active at 1 - 3 weeks. The expression of calcitonin gene-related peptide in the experimental group was increased at the alveolar bone and pulp, and periodontal ligament at the pressure side from 0 - 1 week, and it decreased after 5 weeks to become similar to that of the control group. Conclusions: The results showed that rapid tooth movement using periodontal distraction can be new form of orthodontic tooth movement for accelerating normal bone formation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.3
• /
• pp.276-283
• /
• 2011

Recently, undifferentiated stem cells which exist in dental papillae of immature permanent teeth were newly discovered and these stem cells appear to be the origin of ameloblasts associated with the formation of root dentin. When treating immature permanent teeth, the preservation of these stem cells induce the continuous formation of the root. Therefore, it is reported that minimal invasion to periapical region in immature permanent teeth with periapical inflammation resulted in good-healing pattern in clinical and radiographic examination. In this case, a 10 year-old boy(mandibular right premolar) and a 8 year-old girl(maxillary left premolar) who visited the department of pediatric dentistry at Chosun University Dental Hospital were diagnosed with pulp necrosis and periapical abscess in clinical and radiographic examination. Endodontic instrumentation to the periapical region was limited and MTA(Mineral Trioxide Aggregate) was applied into the pulp canal. The periodic checks showed healing of periapical abscess and the development and growth pattern of roots. In permanent teeth with pulp necrosis and periapical abscess, preservation of pulp and dental papillae in the periapical region showed good prognosis during the periodic examinations. Therefore, a lot of clinical examination and long-term evaluation of conservative pulp treatment in immature permanent teeth are expected to be necessary.