• Journal of the Korea Concrete Institute
• /
• v.22 no.2
• /
• pp.247-254
• /
• 2010

The purpose of study is to investigate the load resistance mechanism of MRS continuous joint designed with different details. Six full-scale specimens, which could simulate the negative moment region of the 8 m long MRS system, were prepared to evaluate the structural performance of the continuous joint. According to the experimental results, all specimens which include the specimen with dapped ends designed by loads at the construction stage were failed in a flexural manner and showed the load carrying capacity over the nominal flexural strength. Therefore it is recommended that the dapped ends for MRS continuous joints be designed for the loads of the construction stage. And the shear key, which was installed on the top of rib for MRS slab, helps the enhancement of strength and especially deformation capacity.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.130-138
• /
• 2023

In this study, experimental and analytical studies were conducted on the structural performance of permanent steel formed wide beams in construction stage. Four specimens were fabricated with different rib spacings of the side steel formwork and fixing plate depths, and experimental tests were performed to investigate the effects of variables on the structural performance. Also, an finite element analysis model of the steel permanent formwork wide beam was proposed based on the test results. Using the proposed model, parametric studies were performed with variables including rib spacing of the bottom and side steel formwork, spacing, depth, and thickness of the fixing plate to derive optimized details. Furthermore, an artificial neural network model was developed to easily estimate the deformation of the steel permanent formwork wide beam with various details.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.23-34
• /
• 2014

Though a dozen of different software life cycle models are suggested, there is no universal model which can satisfy all the characteristics of software. Organizations mix and match different life cycle models to develop a model more tailored for their systems and capabilities. We suggest overlapped-concurrent development life cycle model that is more suitable in various software development environment. Firstly, we divided the development process into abstract and implementation stage. Abstract stage is from software concept phase to detailed design starting time, and implementation stage is from detailed design phase to system testing phase. Next, the abstract stage introduced the overlapped phase concept that begins the next phase when the step is completed 20% by applying pareto's law. In the implementation stage, we introduced the concurrent development which the several phases are performed some time as when one use-case (UC) is completed the next development phase is started immediately. The proposed model has an advantage that it can reduce the inefficiency of development resource greatly. This model can increase the customer satisfaction with a great product at a low cost and on a short schedule. Also, this model can contribute to increase the software development success rate.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.4
• /
• pp.335-348
• /
• 2014

For high-strength steel, it is difficult to be applied to flexible structural member because it have high yield ratio and low basic material's toughness. One of the great problems when using high-strength steel connections is the brittle fracture at the end of the beam member in common with general mild steel connections. In the cases of mild steel connections, it has be developed that special moment frame connection details by reinforcing structural member or improvement of welding access hole. But, it is incomplete at yet about applicability estimation of high-strength steel connections. This study is the initial step research for the applicability estimation of beam-to-column connections being applied to developed high-strength steel, HSA800. And, it studied about structural performance of the high-strength steel connections according to the details of welding access hole through full-scale test and analytical method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.123-123
• /
• 2017

기후변화의 영향으로 개발밀도가 높은 도시지역은 호우로 인한 피해가 지속적으로 증가하고 있다. 최근, 극한 호우에 의해 발생되는 도시침수의 피해를 저감하기 위해 시설물 대책에만 의존하기 보다는 지자체가 수립하는 공간계획을 통해 토지이용, 건축물 등을 아우르는 종합적인 예방전략 마련이 강조되고 있다. 하지만 지자체 도시계획 담당자가 기후변화를 고려해 방재대책을 마련하는데는 국가 차원의 표준화된 방법론의 부재, 침수해석을 위한 전문적 지식이 요구되는 등의 한계가 있다. 본 연구에서는 지자체가 도시계획에 실효성 있는 방재대책을 마련하는데 직접적으로 활용할 수 있는 도시침수에 대한 상세 위험도 주제도를 개발하고자 한다. 이를 위해, 우선적으로 중장기적인 측면에서 기후변화의 영향과 도시지역의 유출 특성을 고려해 방재계획을 수립할 수 있는 강우 시나리오 기준으로 지속시간 1시간에 대한 재현빈도 30년과 100년을 제시하였다. 기후변화의 영향을 고려한 강우 시나리오 기준에 따라 도시지역 내 내수 외수의 침수발생 원인을 고려해 침수심 지도를 생성하고자 한다. 이를 위해 범용적으로 적용할 수 있는 침수해석 모형인 HEC-RAS와 SWMM을 선정하고, 공간적 제약이 없이 폭 넓게 적용할 수 있도록 모형의 구축 절차를 간소화한 방법을 제안하였다. 간소화된 침수해석 모형 결과를 토대로 강우 시나리오별 침수심 지도를 제작하고, 강우 시나리오와 침수심을 기준으로 위험정도에 따라 Red zone, Orange zone, Yellow zone, Green zone으로 영향권을 설정하였다. 실질적으로 각 영향권에 적합한 도시계획 차원에서의 방재대책 수립이 가능하도록 노출특성과 취약성 분석을 실시하였다. 노출특성은 영향권에 노출된 토지이용면적(m2)과 거주인구수(명)로 평가하고 취약성은 영향권 내 취약한 건축물 수(지하 또는 노후 건축물), 보호대상시설물 수로 평가하였다. 침수 발생이 예상되는 영향권별 노출특성과 취약성 분석 결과를 토대로 위험이 높은 지역(Red zone)은 공간규모를 축소해 상세 위험도 공간정보 주제도를 개발하였다. 또한 위험도가 높은 지역은 작은 공간 단위로 노출특성과 취약성을 분석해 상세 위험도 주제도를 개발하였다. 본 연구에서 개발한 상세 위험도 공간정보는 지자체가 도시계획 수립단계에서 실질적인 방재대책을 강구하는데 활용할 수 있을 것으로 기대한다.

• Journal of Korea Water Resources Association
• /
• v.51 no.spc
• /
• pp.1057-1066
• /
• 2018

Climate change has been influenced on extreme precipitation events, which are major driving causes of flooding. Especially, most of extreme water-related disasters in Korea occur from floods induced by extreme precipitation events. However, future climate change scenarios simulated with Global Circulation Models (GCMs) or Reigonal Climate Models (RCMs) are limited to the application on medium and small size rivers and urban watersheds due to coarse spatial and temporal resolutions. Therefore, the current study introduces the state-of-the-art approaches and procedures of statistical downscaling techniques to resolve this limitation It is expected that the temporally downscaled data allows frequency analysis for the future precipitation and estimating the design precipitation for disaster prevention.

• Journal of Internet Computing and Services
• /
• v.3 no.2
• /
• pp.1-13
• /
• 2002

Recently, Internet GIS(Geographic Information System) is increasing. From the results, more efficient spatial data retrieval is needed. For more efficient retrieval, a spatial indexing method is needed. This paper proposes an efficient spatial indexing method for levelized geometric data retrieval. Previous indexing methods are not adequate to retrieve levelized geometric data. For the effects, a few indexing methods for levelized geometric data, are known. But these methods support only a tew kinds of levelized geometric data. The proposed method supports all kind of levelized geometric data and outperforms to the previous method both in retrieval time and memory capacity.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.3
• /
• pp.239-256
• /
• 2017

In the process of site selection for a radioactive waste disposal, site characterization must be carried out to obtain input parameters to assess the safety and feasibility of deep geological repository. In this paper, methodologies of site characterization for radioactive waste disposal in Korea were suggested based on foreign cases of site characterization. The IAEA recommends that site characterization for radioactive waste disposal should be performed through stepwise processes, in which the site characterization period is divided into preliminary and detailed stages, in sequence. This methodology was followed by several foreign countries for their geological disposal programs. General properties related to geological environments were obtained at the preliminary site characterization stage; more detailed site characteristics were investigated during the detailed site characterization stage. The results of investigation of geology, hydro-geology, geochemistry, rock mechanics, solute transport and thermal properties at a site have to be combined and constructed in the form of a site descriptive model. Based on this site descriptive model, the site characteristics can be evaluated to assess suitability of site for radioactive waste disposal. According to foreign site characterization cases, 7 or 8 years are expected to be needed for site characterization; however, the time required may increase if the no proper national strategy is provided.

• Journal of the Korea Concrete Institute
• /
• v.16 no.2 s.80
• /
• pp.249-260
• /
• 2004

The longitudinal steel connection of reinforced concrete bridge column is sometimes practically unavoidable, however the current Korean bridge design specifications have no special provisions about lap-splices of longitudinal steel. This paper reports experimental results of a research program investigating the seismic performance of circular RC bridge columns with respect to longitudinal steel connection detailing. Twenty-one circular column specimens were tested under quasi-static test. The columns with the entire longitudinal steel lap-spliced within plastic hinge region show relatively sudden strength degradation and low ductility than the columns with continuous longitudinal steel and the columns with half of longitudinal steel lap-spliced. However, the seismic performance of the column with mechanically connected longitudinal steel is similar to that of the column with continuous longitudinal steel. The final objectives of this study are to suggest appropriate longitudinal reinforcement connection details for the limited ductility design concept and to provide quantitative reference data and tendency for performance or damage assessment based on the performance levels such as cracking, yielding, collapse, etc. Ultimate displacement/drift ratio, displacement ductility, response modification factor, equivalent viscous damping ratio, residual deformation index, and effective stiffness are investigated and discussed in this paper.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.367-370
• /
• 2011

최근 설계 단계에서 설계품질 향상과 시공 단계에서 비용 절감을 효과를 기대하며 3차원 BIM 관련 기술에 대한 관심이 높아가고 있으며, 또한 부분적으로 기술 도입 효과가 나타나고 있다. 그럼에도 불구하고 설계 및 시공 현업은 2차원 CAD 도면을 중심으로 이루어지고 있으며, 3차원 BIM 기반 설계가 이루어진다 하더라도 결국 시공을 수행하는 건설 현장에는 2차원 CAD 도면이 납품되고 이를 기반으로 건설 현장은 운영된다. 또한 설계 단계 BIM과 시공 단계 BIM은 모델의 활용 목적이 다르고 그에 따라 모델링의 범위 및 방법이 크게 다르기에 시공 단계에서 2차원 도면에 기반한 시공 BIM 모델 구축이 필요한 현실이다. 본 연구에서는 2차원 구조 CAD 도면을 인식하여 3차원 골조모델을 생성하는 기술을 개발하고 구현하였다. 통합 BIM 모델은 골조, 설비, 마감으로 구성되며, 이 중 골조 모델은 설비와 마감 모델링을 위하여 선행되어야 할 핵심요소이다. 시공 단계 2차원 도면을 바탕으로 골조 모델의 생성을 생성하는 작업에도 많은 노력이 요구되며, 또한 이 과정에서 모델러가 2차원 도면을 파악하여 BIM 도구를 사용하여 모델링을 하는 과정에서 오류의 가능성도 내포되어 있다. 특히 설비, 마감과의 통합 모델 구축이 원활히 되기 위해서는 골조 상세, 즉 부재 편심 또는 단차 등이 정확히 모델링 되어야 한다. 본 연구의 도면 인식을 통한 3D 골조모델 생성은 2차원 구조평면과 부재일람표에 표기된 내용을 그대로 인식하여 3차원 BIM 모델을 생성함으로써 모델링 효율의 극대화와 모델 정확도 향상의 효과를 기대할 수 있다.