• The Journal of the Korea Contents Association
• /
• v.15 no.3
• /
• pp.192-198
• /
• 2015

Checked out by the moving vehicle health checks for patients, practitioners, and the increase in radiation dose outside the vehicle, but an investigation into the leakage of radiation can still be negligible. In this study, through experimental results were as follows: Dose that occurs most often where the leak in the right door $1.14{\pm}1.75mR/h$, X-ray generator in terms of proximity to the top $0.65{\pm}1.25mR/h$, X-ray generator and away to the bottom in terms $0.91{\pm}1.25mR/h$, the adjacent rear detector in the upper part $96.98{\pm}158.88mR/h$ dose of the leak appeared in various locations. By measuring position from the rear of the adjacent detector $67.48{\pm}97.03mR/h$ dose had the highest leakage into. Generating device for diagnosis of radiation safety regulations regarding the maximum leakage dose per week, but all met back when it is displayed in the leakage dose Hourly rates do not ignore the leakage radiation dose were measured. Therefore, a mobile health screening in a vehicle outside of the leakage radiation dose to the liver and move on we are not interested twelve barrier leakage radiation dose of defense has a chance to re-evaluate the standards required, and move the vehicle health check using the X-ray increases as the dose per hour, depending on the criteria for choosing the appropriate measures that will require effort.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.124-132
• /
• 2016

In order to estimate the effect of flow distributors connected to an upper nozzle of CMT(Core Makeup Tank) on the thermal-hydraulic characteristics in the tank, a simplified 2 inch Small Break Loss of Coolant Accident(SBLOCA) was simulated by skipping the decay power and Passive Residual Heat Removal System(PRHRS) actuation. The CMT is a part of safety injection systems in the SMART (System Integrated Modular Advanced Reactor). Each test was performed with reliable boundary conditions. It means that the pressure distribution is provided with repeatable and reproducible behavior during SBLOCA simulations. The maximum flow rates were achieved at around 350 seconds after the initial opening of the isolation valve installed in CMT. After a short period of decreased flow rate, it attained a steady injection flow rate after about 1,250 seconds. This unstable injection period of the CMT coolant is due to the condensation of steam injected into the upper part of CMT. The steady injection flow rate was about 8.4% higher with B-type distributor than that with A-type distributor. The gravity injection during hot condition tests were in good agreement with that during cold condition tests except for the early stages.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.2093-2095
• /
• 2004

본 논문은 압전소자를 구동장치로 사용한 마이크로 펌프의 제작과 실험에 관한 논문이다. 마이크로 펌프의 상부기판은 polydimethyl siloxane(PDMS)을 소재로 미세유로에 상시 닫힌 밸브가 일체화된 구조로 제작되었고, 하부기판은 polymethyl methacrylate(PMMA)를 소재로 3개의 압전 디스크가 구동기로 부착되었다. 최종적으로 상, 하부 기판은 액상 PUMS로 접합하여 제작했다. 구동기의 입력신호는 6상으로 구형파를 인가하여 연동구동하며 주파수와 전압을 가변하면서 유량을 측정하였다. 구동 주파수가 0.167 Hz이고 전압이 20 V일 때, 마이크로펌프의 1회 토출량은 104 nl이고, 유량은 1.04${\mu}{\el}$/min이다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.2
• /
• pp.33-38
• /
• 2004

We have demonstrated a tunable Inter based on an asymmetric directional coupler made of a side-polished polarization maintaining fiber coupled with a polymer planar waveguide. The thermo-optic effects of the polymer planar waveguide induced by a micro-strip heater placed on the top layer of the device leads to shift of resonance wavelength of the coupler. The fabricated device exhibited wide tunable range exceeding 230 nm with 720 ㎽ of applied electrical power.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.211-216
• /
• 1995

1994년 11월에 나타난 고리 1호기 증기발생기의 전열관 누설에 대한 원인을 조사하기 위하여 인출 전열관의 파손 분석과 슬러지 분석 및 pH 분석 등을 수행하였다. 손상원인은 국부적인 염기도 상승과 부식전위 상승에 따른 2차측 응력부식균열(ODSCC)로 밝혀졌다. 전열관 표면과 접한 관판 상부의 퇴적슬러지 끝단에 형성된 틈새에서 나타나는 비등현상으로 $Na^{+}$ 등의 양이온이 농축하게 되며, Cl$^{-}$ 등의 음이온 증발로 인하여 국부적으로 염기도의 상승현상이 야기되었다. 또한 재 가동시 전열관 표면에 침착된 잔류 구리와 용존산소의 결합으로 부식전위가 상승되었다. 이와 같은 ODSCC 발생환경은 1990년이래 지속적으로 형성된 것으로 판단된다.

• Journal of Drive and Control
• /
• v.16 no.4
• /
• pp.9-15
• /
• 2019

Bucket trajectory is crucial regarding precision work with an excavator. In general, the bucket trajectory deviation is determined by the machining deviation of the frame, driving deviation of the driving hydraulic cylinder, clearance in the joints, and deformation of the structure. This paper investigated the relationship between the respective clearance in joints and the trajectory deviation of the bucket at the finishing work of the ditching for a 20-ton excavator. As a result, the larger the clearance, the larger deviation is increased at trajectory. However, it was found that the deviation of the rotation angle and displacement of the bucket was limited and the size of clearance does not affect closely on the contact angle of the pin shaft.

• 전기의세계
• /
• v.11
• /
• pp.26-30
• /
• 1963

Ignitorn의 점고자에 전압을 인가하면 수은이 접하고 있는 부분의 어떤 결정면에서 음극점을 발생하여 이 음극점과 전고자 상부 단자간에 arc를 발생하고 다시 주 양극이 arc방전을 유발하여 점고를 완료한다. 즉 점고가 되려면 첫째 음극점이 발생하는것, 둘째 양극과 음극간을 파괴하는 두 조건이 필요하며, 첫째 조건이 만족되어도 둘째 조건이 만족되지 않으면 실고하게 된다. 또 이 두 조건이 구비되더라도 휘점이 영구히 보존되지 못하면 역시 실고하므로 휘점을 영구히 유지하여야 한다는 것도 점고의 필수조건이 되는 것이다. 즉 음극은 정규의 운정상태에서 음극점으로 인하여 그 전신 전자를 방출하고 있으며 음극으로 arc가 통하는 기간에 어떠한 원인으로 음극점이 없어지면 전자방출도 없어지고 정류기로서의 기능을 소실하게 된다. 상기와 같이 점고현상은 이중방전현상으로서 각각의 조건을 따로 고려하는 것이 점고기구나 실고기구를 구명하는데 필요한 것이다.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.242-247
• /
• 2000

In this study, the Rayleigh's energy method and the Rayleigh-Ritz method on the basis of Flugge's shell theory was used to analyze the dynamic characteristics of the scroll compressor housing with clamped boundary condition. The frequencies and mode shapes from theoretical calculation were compared with those of commercial finite element code, ANSYS. In order to validate the theory, modal test was also performed by impact test and FFT analysis.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.07a
• /
• pp.462-465
• /
• 2012

본 논문에서는 HEVC 기술로 부호화된 비디오 비트스트림(HEVC 비트스트림)을 분석하고, 그 결과를 보여주는 방법에 대해서 제안한다.[1] HEVC 기술은 Coding Unit(CU), Prediction Unit(PU), Transform Unit(TU)을 기반으로 부호화가 이루어지므로 부호화 정보를 효과적으로 사용자에게 보여주기 위해서는 CU, PU, TU 를 기반으로 GUI(Graphic User Interface)가 디자인되어야 한다. 제안된 HEVC 비트스트림 분석기에서는 이러한 부호화 구조를 반영하여 사용자 친화적으로 HEVC 비트스트림의 부호화 정보를 편리하게 확인할 수 있도록 하였다.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.570-575
• /
• 2005

An efficiency of a refrigeration cycle and a reliability of a compressor can be reduced if a refrigerant including excessive lubricating oil is exhausted from a rotary compressor. Thus, the oil behavior inside the compressor should be analyzed to improve the efficiency. A tested rotary compressor has been manufactured with visualization windows at upper parts in this study to investigate the oil behavior using developed visualization techniques. Discharge pipe with level gage has been visualized to investigate discharged oil amount. The oil behaviors inside the compressor and discharging pipe at various operating conditions have been analyzed. The results of the visualization for the discharging pipe have been compared with those of the upper part to confirm the accuracy.